วีดีโอ

@JWxUK Thank you. RF Wireless switches are a great option for that type of setup as there are no wires needed from the top to the bottom of the stairs, it works like this th-cam.com/video/Tthpe5YKKcE/w-d-xo.htmlsi=36PVD0s9R7DIqXvO

@RobertSpurling-ev4ew it's GPS.so no wiring at all, just plug it into a USB socket and it's ready to use

@RobertSpurling-ev4ew it's GPS.so no wiring at all, just plug it into a USB socket and it's ready to use

@michaelhunter3471 Thank you. That is exactly correct, no BSM can be trusted 100% but it's still very very good and rarely does it make a mistake

@josepuyalto4951 No it cannot, You need to use the Shelly app to monitor the temperature status or setup an automation with the Shelly app so it sends a message to you at a certain temperature

@United_AD the switches are designed to do that. I cannot remember if there was a feature in the app to turn that off, check your app to see if the status notification led can be turned off. If it cannot then you are unable to change the way the switch was designed

@alirezaamedeo Thats not an easy function to code but if you know how to implement that functionality into the design of your app then it would, best of luck with that, it sounds like a fun and challenging project

@@SHORTwithTECH Thanks for your reply. Just in case I wasn’t clear enough: all I’d like to do is to send a HTTP call (say REST Api call) to the hub to switch a connected fingerbot ON or OFF.

@alirezaamedeo Yes I understand but whether that will work or not is all up to the app designer. Not all apps will work with this Hub so the app will need to be designed to communicate with it and thats the challenging part

@@SHORTwithTECH Thanks 👍👍

@alirezaamedeo your welcome, good luck with the app project 👍

@muskit_ it's detected the car that has pulled up behind my car (you cant see it in the video). Not that blue car. Blindspot monitors cannot detect cars 2 lanes away.

@brianmaule2449 Thank you. I purchased mine from here m.aliexpress.com/item/1005005699456652.html?spm=a2g0o.productlist.main.5.3f7eWYPrWYPrk4&algo_pvid=05658898-c0a7-4af9-b6fb-d165952ca345&algo_exp_id=05658898-c0a7-4af9-b6fb-d165952ca345-2&pdp_npi=4%40dis%21EUR%2119.04%219.33%21%21%2119.73%21%21%402103246c16970247061183084e1187%2112000034048195569%21sea%21IE%210%21AB&curPageLogUid=Sko5sS4MViPl Hope that helps you

Thanks

@jumperpence Thanks, glad you found the video useful. Yes all the cables are pretty long, it should be more then long enough for the Transit, best of luck with the Installation 👍

I don’t want it to beep

Hold down the (-) button for approximately 3 seconds to mute the alarm, and repeat the same again to unmute it when needed

@officialcrazydonut6856 Hold down the (-) button for approximately 3 seconds to mute the alarm, and repeat the same again to unmute it when needed

Oh, 09:55 seems to answer my question. Thx！

Thanks. Yes if a water leak is detected you will receive a notification from the app on your phone from whenever you are

I just purchased it yesterday. I found the beeping was quite loud which I wanna disable the sound from device itself. All I want is notification from the app, is it okay? Cheers mate.

@2005pkpan I don't think that is an option.in the app so would need to disconnect internal buzzer. Yes I agree, it's loud, I like that feature about it

Yeh i have not tested this on a diesel. It claims it can do boost so theres a good chance it can do EGTS aswell in the parameters but unfortunately can't guarantee it without testing it. I can confirm it is a great device though so if your looking for a good HUD it could be worth a try.

1. Power up your Zigbee Gateway 2. Open your eweLink App 3. Hold the reset button on the Smart Button down for 5 seconds until led starts flashing 4. Tap on ADD DEVICE + symbol in the eweLink App 5. Tap on the CONTINUE button in the eweLink App 6. Your Smart Button has now been Setup Hope that helps you

@@SHORTwithTECH That is obvious. But considering the video seems to be targeted to people who have little idea how it all works, I feel like all that should be in the video. And the information how to setup scene, hook the button to all that devices too. That would be useful information sharing.

To switch to MPH do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you

No it doesn't. That feature is not supported for alot of models at all and the BMW is one of them that is not supported

No, it turns itself on and off when you turn the ignition on and off

Sorry I am not using this device anymore so cannot check as this is an old video and I am constantly changing my smart home setup every month reviewing different products. I am currently using the Shelly H&T which does show the Temp and Humidity on Google Hub.

Ok, thanks for your reply.

Generally cameras are WiFi so you dont need a smart gateway to control the camera. This is for controlling Zigbee and Bluetooth devices. Hope that helps you

The buzzer only works when the camera is powered on for example when you put the car into reverse, it is not powered up or working at any other time

Thanks, glad it could help you

Hi, yes it can, you need to do this: Press and Hold the (-) Button for a few seconds to turn the buzzer Off. To Turn the buzzer back on again repeat the same procedure. Hope that helps you out

@@SHORTwithTECH TK brother!

Thanks. It can control any Tuya Bluetooth device but for other brands they generally require there own Bluetooth gateway unless you using something like Home Assistant or Homey which are compatible with a much larger range of devices

@@SHORTwithTECH Thank you for your answer, my device is not a Tuya product. I don't know who is the real manufacturer, I just can control it with my smartphone with the "Control Master" app. It works only via bluetooth, my aim is to control it via internet.

@adeldje000 ok I understand what your trying to do. You will probably need to re-engineer the product a little bit but controlling anything over the internet can be done using smart devices like these th-cam.com/video/W_MkCFReh7U/w-d-xo.htmlsi=wF1IjJxMQSPbtWqa th-cam.com/video/_zR3bV-pPac/w-d-xo.htmlsi=WLiO5bq0IY-CLLE4

No its not just Zigbee, it's a Matter supported.gateway so it accepts Zigbee, Thread and WiFi

I'm just using an Articulated Swing Arm Motor to control it, thanks

It can be switched to English. I think this is done by holding the CITY button down for 3 seconds to switch between the 3 different languages

Thank you. You should definitely install it, the end result is worth it

Yes you can mount it at the front or the rear of the vehicle. I would recommend using this camera though as it would be easier to mount at the front of the vehicle and the performance of it way better th-cam.com/video/PxCPXWZz0sM/w-d-xo.htmlsi=SAb7wtmIDFqyNDYo

Yes you can do that. Just name every Smart Switch differently for example Switch 1, Switch 2, Switch 3 and all 3 Smart switches will work seperately from each other over your network

Hello

If your up to that challenge then there's no reason why not. Generally the glass mirrors break when people try to do that though so be very careful. The light mirrors shown on the package are not included with the kit and the aftermarket mirror lights you can buy are not compatible for all cars. Installing the lights in the mirrors is not an easy job to do but if you like a challenge then that job will definitely be one, best of luck with the Installation

Thank you

No it wont, none of the Car Wifi cameras can do that. If you want to be able to do that and you want wireless then I would recommend this th-cam.com/video/HYmXaGZxjis/w-d-xo.htmlsi=E76MHvQ73qTNGUFG For a reversing camera this is a better solution as it does not have the connection delay problem that you get with the Car Wifi cameras

No, never had that problem. Sometimes after charging it, it wont turn on anymore but apart ftom that it's still working 1 year later. If you pull it apart it might be able to be fixed. I will attempt to repair before replace and rarely can't fix it so it's worth a try

In excessive smoke conditions it can sometimes be required to disassemble the smoke alarm as the sensor will require gently blowing and cleaning out as it's common for them to get blocked up

@@SHORTwithTECH Thanks, I took it apart and blew it out with a hair dryer and it marked clear again.

@bicktor77 That's great, glad it helped you

No unfortunately it does not do that. I also think it will not support your motorcycle as this device is OBD2 so even with a OBD2 adaptor I dont think your protocol will be supported. It's also not waterproof. I would recommend you go for a GPS HUD instead like this th-cam.com/video/AOfrtXDzQQA/w-d-xo.htmlsi=m8byz07ToUxn2tAv but it's also not waterproof. Hope that helps you

Hi, this is a Bluetooth device so to use it with Alexa a Bluetooth Gateway is required. If you don't use a bluetooth gateway it will not work with Alexa, hope that helps

@@SHORTwithTECH No, I'm going to smash it with a dam hammer.

@@SHORTwithTECH Great, I will smash it with a hammer then.

This is the Installation video for it th-cam.com/video/nF09gLk9bfs/w-d-xo.htmlsi=mkCkzB10KIGRPqAo

Thanks alot, appreciate the comment

1. As many people that have access to your network 2. Only 1 device can be controlled with this particular single channel smart switch

Thanks again, your awesome!

Thank you, your very welcome 😀

You can buy it on aliexpress.com

Only in extreme bright light, most of the time it's perfect for me. You can try turning up the brightness level manually in Option 7

Sorry I have not tested

Your Gateway will not burn out, the OBD2 Port is just a communication port. If this concerns you there is always a GPS HUD which doesn't connect to your car at all and works just aswell but with limited functionality compared to OBD2 of course, for example, like this one th-cam.com/video/AOfrtXDzQQA/w-d-xo.htmlsi=CKTHDs4_ddCbQSUR

Where did you try downloading it from? Maybe you can try this, here you go www.i-2g4.com/app/e-SPY.html Hope that helps you