วีดีโอ

@@alexpalmer9894 Hi Alex, I hope you’re well. Since the shelter has been built a lot of work has been done. I will to do an update video soon showing all the work. The van is now all in epoxy primer (except the doors) so it does look quite different from the last videos. I really appreciate your message and interest!

Hello mate, As far as I can remember there are the two nuts or screws to undo on the backside of the steering wheel to remove the horn cover, then just the central bolt. I don’t think there was anything else? Are you getting any movement at all? I can only think there might be a bit of corrosion that might be making it a little stiff to lift off.

@@keepingupwiththecampervan wow that was a fast reply thanks so much! Looks like mine has a welding point 🫤 a previous owner might have taken the easy way to fix something here 🤦‍♂️ There was the nut, and at the bottom of the thread there’s a ring that has one side flattened and a welding point on top

@@clearprop hello! Sorry I didn’t reply sooner. Thank you very much for the nice words. The project is much further along now, the van is all in primer now, inside and out (except the doors) I will do an update video as soon as I can!

@@keepingupwiththecampervan Great to hear it's still coming together. Looking forward to seeing another installment, whenever you are ready. Take care, catch you soon. 👍

So the van can still be moved :)

Hi Alex! How are you? The van is much further along than the last video. A proper structure has been built around the van now so it’s protected from the elements and lots of work has been done. I have just been bad at making the videos. I have filmed everything tho. Keep an eye out as I will do an update video soon. Thank you for asking! Is your van doing alright?

Hello! Thank you for the message! Ah yes, I have been working on the van fairly regularly and filming everything I have been doing. I do intend to make some more videos soon and get back into the rhythm of it all. Life has just been quite busy in recent months! Do you have Talbot yourself?

@@keepingupwiththecampervan I have a C25 minibus just the classic version. I loved seeing how you dared to dismantle everything, I only dare to do smaller tasks for now. Good luck 🤙

Thanks!

Apologies for the late reply, I have not been on my youtube in a little while. Thank you for the kind words and tip on the brake lines! 😂

Sorry for not replying sooner, I have not been on my youtube for a little while, I do plan on uploading some more videos soon. Absolutely, it's a strange one, there are some areas of the van that are really in great condition and then there are some areas that will need totally replacing do to the rust. I think you are right in terms of doing this project now and not leaving it any later. Thank you for the message and I hope all is well!

Yes all well here, thanks - although I do need to get underneath with the wire brush and some rust treatment before too long! I just need to keep things at bay and in some ways I envy you - I can't even see some areas so there's always a worry that rot is setting in. With yours you can sort everything as you go. The hard work will be more than worth it. 👍😁

Thanks Dan! I hope all is well with you. I will be posting some more videos soon. I have been working on the van as much as I can but I have not found the time to make any videos as I have been pretty busy in recent months. I will get back in the swing of it when I can!

@@keepingupwiththecampervan Great to hear from you!! As I've been pottering with my Talbot I have wondered about you and the restoration. So glad to hear it's still on the go - that's great news. Looking forward to seeing more whenever you're ready - there should never be pressure to release a video. 👍😁

That was a good job, I hope you succeed to resurrect the engine. Just came across with your video, been searching for a tutorial about replacing the clutch. Would it be difficult to remove the gearbox only ?

Ah thanks Dan, how are you? I wonder that every time I work on the van to be honest haha 🤣, I am further along than the videos suggest, I just have not had time to edit them, but I will! Thanks again for the message!

@@keepingupwiththecampervan My pleasure! I've no doubt you must wonder what you've got yourself into at times, but you are getting nearer that moment when things start to get reassembled. Keep an image in your mind of heading off on the road, cupboards freshly packed with food for the trip, sun shining... And you'll know (unlike I do!) that every inch of your classic van has been sorted out. 🙂

@@clearprop Thanks Dan, It's hard to see the progress sometimes and I am very aware of there being so much more to do, but when I look back, so much work has already been done and like you said having a image of the end result, van packed for a trip and being on the road is enough to keep me going! Thanks again for your consistent support, it really does help! Aiming to get the next video up this week.

@@keepingupwiththecampervan If motivation really gets dire I'd be happy to roll my sleeves up and lend a hand! I prefer payment in tea with one sugar. 👍 Anyway here's to the next video. 😁

@@clearprop 🤣

Hi Dan! Thank you for checking in! Haha, well, a bit of both. Quite a bit has been done since the last video, all filmed, I just have not got round to editing them yet. My motivation goes up and down, my stubbornness should be enough to see it through tho. Engine came out a couple weekends ago which felt like quite a big job out the way. Slowly but surely! How are you and how is your van doing?

@@keepingupwiththecampervan Great to hear from you - thanks for coming back to me! 🙂 Glad to hear work is progressing, and with the engine out you can really get into areas that are impossible to access otherwise. Looking forward to seeing how things look once you've had time to do the editing (no pressure though of course!). Mine is coming together and has just passed its first MOT in my ownership. Just one ball joint to replace which arrived today, but also I need to get some corrosion treatment done to prevent further deterioration. In some ways I envy you - there are areas I'd love to get at properly but I can't unless I commit to a full stripdown like you have. One day it'll have to happen I think! Anyway, take care and keep up the good work. 🙂

Hello, no problem at all, the rubber seal? I have bought a replacement, it was on eBay. I will post the link below, you can also go on their website if you Google “Coastal Motorhomes” I have bought so much from them for this project, solid parts and reliable service. www.ebay.co.uk/itm/281729764244?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YcRLQRJrQf-&sssrc=2349624&ssuid=E9R721I9SlW&var=&widget_ver=artemis&media=COPY

@@keepingupwiththecampervan great, I just watched their shop there’s so much choice! Thanks again and good luck 🤙 cheers

Thanks mate, I’ve been slacking a bit recently, but there will be plenty more videos to come, I am determined to get it done!

haha, I feel your pain! The weather here has been so bad recently, luckily we had a dry day at the weekend so I did what I could. Did you manage to get your work done?

@@keepingupwiththecampervan Yes the new panel is standing inside the van, with lights fitted and wired. Just need to lift it into place with some insulation behind it. I've decided that even if the weather only allows a few small jobs, those jobs are done and that's progress. It all counts! How is your motivation at the moment?

@@clearprop Ah thats great, progress however big of small is always a step in the right direction. Motivation wise, I just keep picturing the end result and keep trying to do little and often without stressing myself out over having an actual deadline. I would love to have the re spray done by the end of next summer, that would be great, but we will have to see how it goes! Have you got any plans with yours work wise?

@@keepingupwiththecampervan Glad to hear you're keeping the end goal in sight. That image will no doubt sometimes be clearer at some moments than at others, but you will get there if you just keep chipping away. 🙂 The next plans with mine are to finish buttoning up the interior (including the complete re-lining of the bathroom) and then get underneath to treat some rust. I need to change the oil and also the fuel filter, and I'll probably change the engine mounts and possibly some suspension parts too. There's always something but I like learning! 🙂 Take care and enjoy the work, sir. 👍

haha, yeh, I noticed something 🤣

Hello mate, Thanks for the message, ah nice, yes I still have some bits and bobs, is there something you are specifically after?

Thanks Alex!

Thank you Dan!

hahahaha, yes she is! I am just determined to repair or replace anything that has rust. It's going to take a bit longer but will hopefully be worth it in the long run. That's what I keep telling myself anyway 🤣

@@keepingupwiththecampervan It must be so tempting at times to skip things, just to get on to the refit and build. Keep determined - it WILL be worth it in the long run for peace of mind. Looking forward to one day sharing a camp site and a brew with you, with two fine Talbots. 🙂

@@clearprop Absolutely! I hope so. Ah yes, that will be a day to look forward to! Are you working on anything in particular at the moment on your van?

@@simonfreeman5885 I have quite a few things on the job list at the moment and I'm working through them depending on the weather (inside jobs vs outside). I have just found out today that a window I refitted still has a minor leak, which is running behind the new wall board and insulation - so that will have to come out again! Most pressing in the engine department is an oil change (including gearbox) and a new cambelt. Then there is the bonnet weld repairs and respray and various panel touch ups. Plenty to keep me busy!

@@clearprop Ah, there is always something to do isn't there. What colour are you going to go?

Thank you Dan, I completely agree, which is why I really do appreciate the comments and support, it really does help. We have just ordered the welder so hopefully very soon we can start the repairing and replacing of panel's. brick upon and brick! I hope all is good with you.

@@keepingupwiththecampervan Yes all well with me, thanks. Still plodding through my Talbot restoration too and winning slowly. Need to get underneath soon and tidy up some rusty areas before coating with something (haven't decided what yet!). Which welder have you gone for? It's a skill I don't have but I did recently buy a stick welder for easy stuff!

@@clearprop Glad to hear all is well with you! Oooo, let me know what you end up using, I would be curious to know. I have done some extensive research and we have gone for the 'R Tec Mig 180'. (I will make a video when it arrives) The decision was ultimately made as two people I follow on instagram (who don't know each other) both use it and are both very good and what they do. One of them who you might like to check out (if you don't already know him) is 'greyskybuild' (instagram.com/greysky.build/?hl=en-gb) he has restored a Talbot Express called 'Wasabi' and done such a lovely job on it. I can't weld myself but my Dad can, he's going to be doing the majority of the welding, but I do want to learn along the way and do some of it.

@@keepingupwiththecampervan Thanks for that - I've just had a look and what a superb job he's made of Wasabi. I don't 'do' Instagram much so I hadn't seen it. For the underside of the van I'll probably go for a rust treatment and then a simple coating of chain saw bar oil. I've seen this used before and it does a great job, without trapping water which can do more harm than good of course. I'm really looking forward to watching the welder video and seeing how the work goes. If you can persuade your dad to do a bit of demonstration on camera that would be great too! 🙂

Thanks Alex! I hope all is well with you, you are welcome, I appreciate your ongoing interest and support!

Thanks Jane, I am certainly going to try!

Thanks Alex! How are you doing? I hope all is well with you!

@@keepingupwiththecampervan all good 👍

Thanks man! Slowly but surely for sure. Thanks for the tip, I hope all is well with you!

@@keepingupwiththecampervan All good here, we're still working on the diesel heater issues 😂

@@ttxela haha, there is always something to do isn't there! 😂

@@keepingupwiththecampervan absolutely!

Thanks Dan! I really appreciate your comments, reading what you wrote helps to keep me motivated to finish this project. There is a couple last areas of the spray paint to remove, then it will be onto the repair and replacement of panel's. Thanks so much for watching the videos and sticking along for the journey! I hope all is well with you!

@@keepingupwiththecampervan I was just keen to make sure you knew someone could empathise and feel your pain! Looking forward to the next installment. All well with me thanks, trying to find time to start dealing with a rusty bonnet! 👍😁

Thanks for your kind words Dan, I really appreciate it! How are you getting on with your van?

@@keepingupwiththecampervan Thanks for asking - well remembered! It's coming on thanks, you can have a quick look if you browse to ttxela's channel and check out his August Update video. Fast forward to the viewers' vehicles section and you'll see my poor old Talbot! I've now completed all the electrical work and fitted new vents and solar. Really hope I get the chance to catch you one day to compare notes. 😁👍

@@clearprop I just had a little look, ah, its like you said, it will be so rewarding when all the work is done. She looks like a great van!

@@keepingupwiththecampervan Thanks for watching! It's good to know that there are other people out there with a similar mission. Here's to saving another two old Talbots. Take care.

@@clearprop Definitely! I couldn't bare it going to scrap, they have made it this far!

Hello Alex, oh I know, the plan was to always post once a week but I’ve been on quite a big job recently which has meant it’s been hard to juggle life aswell 😂 I am aiming to get back to once a week tho! I have however just posted the next instalment. I really appreciate you asking tho! Keeps my motivation alive! I hope all is well with you!

Thanks Thom! The videos will start to get a bit more in depth when it comes to the welding and painting! How are you getting on with your van?

@@keepingupwiththecampervan Looking forward to it! I've started stripping the van out and then going to tackle the rust and some welding too. Struggling to get the side panels out though. Your video has really helped 👍

Thanks man! I hope all is well! yeh, slowly but surely! Do you think you will be making any videos of your vans progress?

@@keepingupwiththecampervan I doubt it. It did go through my mind but I'm not sure I could commit to the regularity needed to make the videos watchable. I'm documenting it with lots of photos though.

Thanks George and Jane! I will definitely check out your video!

Hi Alex! Thanks for the message. The intention is still to try and post every week but after Covid works been a bit mad. I am aiming to get the next one up ASAP! Thanks so much for the interest and support! It really helps! I hope all is well with you!

Thank you Dan, haha, yes its certainly a labour of love. It's the first project I have done of this size so its nice to learn lots of new things and make good progress but equally demotivating sometimes when you realise how much there is still to do. I am determined to get it done tho!

@@keepingupwiththecampervan Keep going. I'm sure you'll have ever increasing support from the community as you move forwards. Here's to perhaps catching you one day at an event - when my van will be finished too! 👍😁

Thanks Alex! Yes, I was surprised it's as solid as it is, definitely some areas to sort out but it really could have been a lot worse. I hope all is well with you!

Thanks Dan 🙏🏼 Good luck with your project!

@@keepingupwiththecampervan Thank you - us crazy people need all the luck we can get! .🤦‍♂️😁

Hi Alex, it’s been a bit of a mad couple of weeks, work and now I have got COVID, it’s really hit me. The plan was to post every week but unfortunately the last couple videos haven’t worked out that way. As soon as I am better I will get back on it! Thank you for your interest! I hope you are well!

@@keepingupwiththecampervan hope you recover soon ,it's still out there , government just covering up ,had 3 friends go down with it last weak

@@alexpalmer9894Thanks Alex, oh it’s definitely out there, I’ve managed to avoid it up until now. We also know a few people who currently have it. Hopefully by the end of the week I will feel normal again! I will do my best to get the next instalment on asap! Hope all is good with you!

@@keepingupwiththecampervan Get well soon, sir. Looking forward to the next installment. You are making great progress here.

@@alexpalmer9894 Hi Alex! I just wanted to let you know I have uploaded the next one! I hope all is well!

Hi Alex! Yes, aiming to get the next one up in the next couple days, I hope all is well!

Thank you 🙌🏼

Absolutely! It’s obviously not an over night job, but we are moving in the right direction! I hope all is well!

Thank you for your comment 🙌🏼

Thanks Alex!

@@keepingupwiththecampervan long weekend coming, your going to be knackered ,take a day off and enjoy 👍👍👍

Thanks! Yes, in hindsight that probably would have been the thing to do 😂

Absolutely! We are both just excited for the day it is finished, so we can go on some adventures!

Slowly but surely! I hope all is well!

Thanks guys! Yes, slowly but surely.