วีดีโอ

Posting this from a comment, How to calibrate "FTM, pg 25: Press Power to turn it on, press and hold Temp and Delay End at the same time for 3 seconds, then hold start for to start calibration. It'll do it's thing for 1 minute, and then turn off." let us know if this worked for you

This will keep you well toasted all winter

Im 28 and i had this when i was 4

Unboxing & Setting Up Propane Mr Heater th-cam.com/video/30z4isEupt0/w-d-xo.html Mr. Heater 18,000 BTU Big Buddy Pro Series amzn.to/4fjxnYl

Mine does the same thing....I suggest wash small loads 😢😢😢

Thanks for the video! I just got my Portable Buddy in. I may buy the Big Buddy later. For now, I only bought a few of the 1lb propane tanks, but I'm going to get a 40lb tank before winter gets serious. You really helped show it's pretty simple to set up with the tank, hose and filter. Thank you!

does it works? I have a single garage, contemplating between big buddy vs diesel heater

If you like the tip Subscribe and share your thoughts on the comment section below

The video was really helpfull! I've been thinking about getting one for my room coz this winter seems like its gonna be harsh on me🥶🥶looks like it heats up quickly!

Helpful

Good job

If you found this video helpful, please like, comment, and subscribe to support the channel and stay updated on more helpful content. Your support means a lot-thank you!

Good job

6 in 1 Folding Utility Knife amzn.to/3Bho90Q

Mine does the same damn thing and i have to unplug it to start over very frustrating

The floodlight cam comes handy with motion sensor at night

Jesus. Thanks chat

Llol no its not 😂😂

Weirdsong to use for something like this 😂 But good work! I know youre gonna feel like Superman when youre done. ❤

Praise Jesus

Hi thanks for the video, inokraft has no customer service number, I am trying to prime my br and new m3 plus like yours and it is there no water coming out the smaller tube, I put it on prime I have water in one bucket with the strainer and a empty pail for the small tube I pushed. The start valve twice and then turn in. And I get nothing, any ideas.

Just assembly it and stop talking.

Does anyone have the part number for thr suspension rods?

This is so helpful! I’m thinking of using a framing nail gun with 3.25in nails instead of screws. Do you think that will split the board? Also I’m considering not ripping the 1/2in off the 2x3 as it meets flush with the foundation, would that through off future insulation?

Thanks for sharing your knowledge, I would have used a quarter turn valve which makes shutting the water faster and Teflon tape on those connections, as an added leak proof measure. On the water hose, let your viewers know that the seal ring is already built in, hence why you did not use the one from the valve. Will continue to follow your videos.. muchas gracias...

Got a leak?

Is this a balloon wall is that why it has to be 2x6

How did you get ub error on your washer?

Women farmers are the best smart 🧠 and hard workers

That’s about $3200 worth of stain. 😮

The manager is indeed very knowledgeable confident and articulate. The interviewer is asking very good and relevant questions. Can the manager advice on the best fungicide to control fungal diseases on the plant.

fluency and simplicity of explanation by the manger is impressive

Well done Girl, waaw, if I have already started trying to plant and didn't buy the plants eg Dragon plants, from u, can u buy my fruits? Thank u

I had the toughest time with the stupid stand. Everything else was easy but that height adjusting thing was crazy. Come on lasko. Either assemble it and sell it or have clearer instructions.

Wow! Nice job!

Going threw the samthing my water bill went soo high cause of this!! Its not ub un balance.....i need to replace the (DC97-16350U this is the part #) Suspension Damper

Do they sell cuttings and how much

Thank you. It was useful. You forgot to show how to pump the gas.

If you were using 2x6 or even 2x8 floor joists, would. you have considered only two main beams? I am planning a shed, but my plans call for 2x8 joists, but I am using two 4x6 beams on fasteners cemented into concrete blocks, sitting on top of buried concrete. My concern is the amount of cantilever, but with 2x8 joists for this 10x12 shed, my cantilever of a foot seems okay. Just looking for some opinions on the confidence in a cantilevered floor.

That is a 1.5 ah not 2

Hi Jeff, Can cuttings of the Wambugu apple be imported into the US? BTW... Great job!

She is amazing

My washer does the same thing! It’s not unbalanced bc I’ve fixed that and it still does it.

Where is the rest of the video ?

Do me I favor, 'subscribe' and be blessed on your hustle rig

You don’t know what you’re doing! That tool isn’t for concrete.

Gas valve solenoid went bad. 1 year old. Crap

Bro, your supposed to be telling us...

How can mesure the gable part?

How can cut the gable part ?