วีดีโอ

@@Francis-es4mp that is super cool I’ve actually been having my eye on that one for really long time. I so would wanna buy one. The only thing was a little bit worried about was the group head size? I have a lot of things that are 58 mm or 51 mm. Isn’t the group had a little bit of a different size? I have been really Jones to get one of those super cool.

@@maestromendis amzn.to/41C0Fy9

@@maestromendis Steam Nozzle Tip for Delonghi Stilosa EC260, Replacement Steam Wand Tip for Delonghi Steamer Upgrade - 3 Hole DeLonghi ECP steam wand, tip upgrade Review www.amazon.com/vdp/00cdd3515b43449fa72a73257797cb42?product=B0BVXYDPX9&ref=cm_sw_tw_r_ib_dt_08I11w7F9wHRr

@@maestromendis thanks so much for watching. I really love the steam one tip. It’s working really well for me. My big thing is I just had to make sure that I had to fit in on the right.

It hasn’t adjustable depth I haven’t had to adjust it personally, but I know that you can I just would always be cautious. There are extra needles that come with it and I think it’s because if you do bend it.

@@dianerumbold3757 so the seconds are programmable you could change it as much as you want. I guess what it’s really designed is if you wanted to count second based on the frequency of use of certain beans and if you wanted to make sure that you got the same result every time. Personally, I use so many different beans I go from light roast to dark roast. I get beans from different regions so I’m always kind of playing around with the seconds sometimes I’ll set it for nine seconds but then I’ll push it twice the nice thing like I said it’s all programmable.

I try to do my best.

Hey, thanks for watching. I really appreciate it to be honest with you. I really don’t know. I haven’t taken it apart, but I did find this article that someone posted on Reddit www.reddit.com/r/espresso/comments/189nv4r/casabrews_4700_internals/

@FaithAndCoffeeBean thanks! I appreciate your channel! Just found it and subscribed! Merry Christmas and God bless!

That’s a really great question to be honest. I’ve never taken a gauge to it to check to see if that if it’s a perfect match, but it’s very close. I’ve been really happy with the seal that creates and it’s one of my go to Porta filters.

@@FaithAndCoffeeBeanthank you for the reply. I have a Neouza bottomless portafilter wich is very similar to this but the ears are noticeably smaller than the original one and if I see one next to each other I can immediately see the difference. If you can’t see differences with your eyes I assume that this one is closer to the original size than mine that cause me several leaking while brewing

Hey, thanks so much for watching awesome Texas is amazing. I live in Texas for some time and I have family there. I love the state. It’s a great place. Yeah I really love the milk froth or nozzle replacement. I’m gonna go ahead and include the link for you. amzn.to/3BqrhHJ great price and works really well!

I put a review video as well on Amazon of the wand tip. DeLonghi ECP steam wand, tip upgrade Review www.amazon.com/vdp/00cdd3515b43449fa72a73257797cb42?product=B0CL5XDF83&ref=cm_sw_em_r_ib_dt_OHjrdcVeo2ZJF

Yeah, it actually tastes really really good. I was super happy with the results. I got later on. I actually tried doing more of an espresso grind, and I cut it in there. Pretty tight almost choked the machine. It went through really slow, but it made one of the best cups of coffee I’ve ever had.

Nice!!! I usually start off at a four or five and then work my way down a little bit, but four tends to be my sweet spot!

@ thank you. Wish me luck👍😄

Wow, thank you! 👍👍👍👍😃

lol thanks man 😂😂😂😂

Thank you Sir!

I kind of thought the same thing till I tried it. I use the round WDT tool and an old school needle set up before. Now I can’t imagine not having it in my workflow. It just makes really easy work of stuff especially if you’re in a hurry are you working commercially.

Some of the 51mm delonghi take a 3 ear. That’s the more high-end machines I have an ECP and it takes two ear.

amzn.to/3Vm3z6h mhw makes a 3 ear 👍😀

@FaithAndCoffeeBean Yea my ECO3630 looks to only take a 2 ear and 51mm

Are you doing the single dose technique? And RDT? I push the bellows down well it’s grinding and some times I get the motor running as I drop the beans in.

@FaithAndCoffeeBean doing all of this. Trying to be as consistent as possible

@@garritwinans7774I have been real happy with my results, but I wish I had more money or I would buy a DF54. The hard thing is every thing sub $100 is mixed bag. I love my Timemore c3 pro the most but it’s a manual grinder. Trust me I wish I had a bigger budget. I would spend the extra money if I could but I am on a tight budget.

I always gonna try the new thing. I’m always open to learn and find new ways to do things.

It’s the Steam Nozzle Tip for Delonghi Stilosa EC260, Replacement Steam Wand Tip for Delonghi Steamer Upgrade - 3 Hole amzn.to/4g119Cq

I’m so happy I was able to breathe that. I think it looks way better and it feels like it really makes the stream that comes out just better. Just know what to say. I watched Tom’s coffee corner and he has a video about replacing the whole wand and that seems really really cool, but I just wasn’t gonna go ahead and do that.

Hey, thanks so much for letting me know I agree the Amazon storefront pages are kind of goofy to see if you do search for coffee in the search feature. A lot of my coffee links comes up. I’m trying to work on that to get a little more organized but Amazons a little weird if there’s anything you need or any recommendations, I’m always happy to share any links, and most links are in the description.

Thanks bro!! This stuff is pretty good. I got some great results.

Thanks brother!!! 👍🏽😎🙏🏽

@@tommyg957 nice it gets the job done for sure 👍 not fancy pants but works 😎

The ninja looks so cool. I am really really tempted to buy one!!!!! it really sounds amazing 😎☕️

It comes in a close second to my casabrew. It’s so easy to use that my 11 daughter can use it to make herself a latte. That kind of ease comes in handy for when you need a coffee to make your coffee! Haha

The 4700 technically doesn’t have pre-infusion but it does seem to wet the puck before this espresso gets all the pressure. It’s kinda like pre-infusion but they definitely don’t say it as pre-infusion.

@@FaithAndCoffeeBean Ohh, my 5418 primes for about 3sec before pressuring up

So true 😎👍🏽

Thanks so much that means a lot. I really appreciate it.

You know it!

I love this thing 😂 oh my goodness it’s so cool 😎

Thank you it’s good stuff

Thank you I found that out the next time I used it. 😉👍 thanks for watching. My son loves it.

It’s comes with its own traveling bag. I do t think it all fits but with the bag it works. My son’s been the main one using it and he loves it. I am a big aeropress nerd 🤓

So good!!!

It’s super good 😎👍🏽 Thanks for watching.

Thanks brother yeah, I really love with MHW does that make some really great stuff!

That’s so cool the DF 54 is an amazing grinder for sure!!!! The 5418 is a good solid espresso machine! I really like that it has the pressure gauge on there so I really help you out with dialing in. 4700 is a 58 mm versus the 51 mm that’s on the 5418 so it changes a little bit the dialing in process. Commercial espresso machines are at 58 mm to be honest so I have a delongi EcP that’s 51mm and it pulls some amazing shots. Thanks so much for hanging out. I really appreciate you watching the video and saying hello.

@@FaithAndCoffeeBean yes, i love the dial, the only problem is finding out where 9 bar is, the manual says nothing about where the needle should be on the gauge, i reached out to Casabrews and there was some language issues with the email but what i made out is they say the middle of the espresso range is 9 bar?, no madder what bean i dial in im at the high hend of the gage to get 36/40gr at a good 25-30 seconds, so im still not sure but the whole family is impressed with my lattes and flat whites :)

I didn’t have a scale at that time so I really don’t know but if I had to take a guess probably like 24 grams. I do like my coffee strong.

Thanks, brother. Hope you’re doing really well.

Nice!

That’s so cool!! yeah I wouldn’t. My kid told me to go ahead and try on the espresso machine. I kind of gave this funny look and then I thought oh we gotta do that. we’re big fans in our family. He drinks a lot usually I buy the k cups for him. We just got him his own coffee grinder so I’m happy now he’s going to be able to have it fresh 🤣👍🏽☕️

Nice I really been loving it. I feel like it’s really been a good way to make my espresso on a budget and I’m all about that.

Thanks brother!!!

Hi there thanks so much for watching! The cm 5418 I think is a 51mm it’s a cool machine big fan of casabrews! With this grinder one of the portafilter holders can fit a 51mm to 54mm and the other bigger one fits a 58. I have the casabrews 4700. I have also been using my dosing cups and they fit as well.

Thank you😊

@@pateverhart7441 hey anytime thanks so much for hanging out. I really appreciate it.!!!

Hey, thanks for the comment. I wouldn’t call it. Hate for Starbucks definitely not. I am from the West Coast. I actually have family from the Seattle area and I have a big respect for what Starbucks did years ago. I think some of my first real espresso memories are going to Starbucks as a kid and I’m in my mid-40s so I was around when there wasn’t Starbucks. I definitely have a respect for the company and what they do and people at Starbucks. I’ve had a lot of friends and spent many nights hanging out at Starbucks during the years. I just think it’s really important to also support local roasters and and all that but I’m definitely not a coffee snob and I want to call it a hate for Starbucks in anyway. i’m definitely more of a coffee nerd not a coffee snob. Heck sometimes I really like Dunkin’ Donuts coffee matter of fact I’m gonna be doing a video pretty soon where I’m taking Dunkin’ Donuts original coffee that’s whole bean and I’m gonna put it in my espresso machine and pull some shots.

That’s amazing. I love hearing that. Did you have to do any other type of maintenance on it?