วีดีโอ

Mate spot looks amazing 😮

Good video man, it helped me a lot 🙏🏼

omg finny I found a dc to dc in the bin working and I tryed to fine if u can do this but failed so sat in my 4wd draw and just found your video and now I finny got use for it thanks so much ❤

Thank you fella I just got a lift kit done in my jeep and I was going crazy when the light pop out on the dash It took me 7 minutes to fix it and the help of my 95 years old grandma to check the steering wheel

Thank you, sir, my 2013 Jeep Wrangler JK has a very very slight steering wheel misalignment but a year or so ago I replaced a wheel bearing and was thinking it was that because of the traction control light.. So I will be checking into this to see if it corrects it! Again, thank you !!🎉

love the jeep and the video - thanks for sharing!

Thinks for the video on the JK. I'm going to try this and see if it takes care of my problem. I've got a 2013 Jeep wrangler sport ok.

I get the same exact problem on my 2014 jk. After installing 4inch lift, now steering wheel is really crooked🤦🏼‍♂️

It's sad that the dealership would charge you thousands for ten minutes of work with parts that cost 60 bucks. Also keep your vehicle overnight so it doesn't seem like they robbed you

Thank you so much!!

Did you have to do an airvent for the watertank?

Should show us how you set this up

Just the video I was looking for! Thanks Lui. Very informative.

Ive got the same problem with mine can you please send the link please mate im in south Australia 🇦🇺

Hey man, I know it’s been about a year since you made this video but I just replaced all the tie rods on my jeep and eyeballed them and reinstalled them and it’s Easter Sunday so not an alignment shop is open. Thank God you make TH-cam videos brother you will get me to work tomorrow morning. I might’ve been able to figure this out by myself because I was an alignment technician about 20 years ago so I remember. that tells you that even us mechanics go online looking for help I’m a mechanized heavy equipment mechanic and I will be getting to work tomorrow because of your content. I can’t tell you how much that means to me. I hope you have a blessed weekend a blessed day, a blessed year and an absolutely blessed life, sir thank you for all you have done I was shaking when I drove down the road and I felt all that going on with my vehicle.

Well done sir thank you for sharing this information great work

Thanks can’t wait to try this tomorrow.

how to change time to 12H? mine is on military time. thanks

thank you for showing in simple way.. quick question how many inch that BAR LIGHT. thats so impressive way you organised

Awesome work mate, subscribed for the great detail

Geday Lui great job the electrical work looks first class ,i will have to get a sparky to do mine im just not that talented. Dose that tank fit in with the rear seats still in place ????? You did say you can did you test fit Kind regards

It is a great set-up, wonderful job! The frontrunner model does not fit on the jeep wrangler 2013 (3rd generation). What is your wrangler year and what is the water tank model have you used, please?

This is exactly the same issue. I’m having with my Jeep all other video have issue with ABS I don’t have ABS light I only have traction control light My steering wheel is just as bad as your steering wheel Thanks I will try this tomorrow 👍🏻

Congrats on a wonderful build. I’m researching a water tank for a Jeep Gladiator. When you’re driving do you notice any water sloshing sounds coming from the tank? Thank you

Great set-up! Very detailed video, too. It helped me out a lot.

Thanks for the video instruction. Do you have a video for how you installed the light bar?

I just started having this issue on the front on my 2014 ram 1500. After seeing this video, I jacked up the front end wiggled the air connections back and forth several times. After driving it around a while, it fixed the problem after being broken for a week. I'm sure the nitrogen has already leaked out of the system, but it seems to be functioning again. The system kept flashing a message that the motor was overheating and it needed to cool down. So hopefully the motor didn't suffer long-term damage.

are you free to select the sensor reading you want? for example my car OBD provides transmission temp sensor, can i add it to the display? does it reads the list of sensors your car having then you can select from it?

Geez’

Have a question to change those elbow valve, we have to turn the car off or just put it on park mood? Thank you

Your Jeep looks great can I ask what size wheel tyre combo you are running ? Thanks

What wheel and tire setup are you running? Is there any rubbing is issues? And, do you have airlinks lift kit?

Exactly as the man described, great video and I can here to work out how to remove the clip off the back of the accelerator cable. The only issue with the install is the terrible stick on the back of the controlller, doesn’t stick to anything from the very first minute of install. So need to go get some 3M double sided. Pathetic. The performance of the unit itself, very good bang for buck.

From Buffalo NY, Good stuff Mate. 👍👍👍

about to buy mine on amazon quicker deliver take note ebay sells one that has white tips do your research i think that is a different. local dealer quoted 4k to 20k to repair no joke lol

i mean the valve thanks

hi thanks we hold GC 2013 overland I am trying to locate the catalog number of the item and its exact name in order to purchase and I would be happy for help on the matter

You SHOULD worry about air being in they system. Nitrogen doesn't allow water to enter the closed system. Moisture is the cause of failure for many air suspensions. Also, nitrogen molecules are larger than air molecules making it harder for them to leak out. Finally, nitrogen is not affected by temperature changes. When air gets cold the pressure decreases so your suspension filled with air will sag in cold temperatures. This is why Jeep designed and filled the quadra-lift system with nitrogen in the first place; for better, longer lasting performance at a wider range of temperatures. When you fix your leak have the system topped up with nitrogen. Low levels of nitrogen will lead to your system not being able achieve the highest ground clearance.

You ate the best

Thanks for posting this video - 2012 Overland 5.7 in Victoria, fixed in 5 minutes!

Well done. Have a 2016 3.0l diesel Overland...will order these parts now and keep it till the time I have the issue. Thanks so much

Man I’m so aggravated with my 2012. It’s been in the shop 3 times in 2 years

Any options if this fix doesn’t work?

Will this issue causes the Jeep to go dead while driving?

Thanks for the video, as you say, very easy installation, especially after watching this video. Looking forward to your other servicing videos.

Lift kit. Problem solved.

Good video thanks for the info. Best wishes.

My jeep overland was sitting on all four wheels replaced the valves on front struts reset system and now after about 3 hours rear now sitting on tires and front stays up

What is the name of the parts to order??

Great video! Easy to follow but unfortunately it’s hasn’t fixed my issue. I will have to take it to the mechanic in a week