Tip to keep them interlocked. Set the forks on the axe head and drop it/slam it on a hard surface. In the fire service, we call this "Marrying the Irons". To unmarry the irons simply drop them or hold the axe upright and tap the end knob on a firm surface
This video is so boring far too much time contemplating learn to be this slow and you can specialize in body recovery make sure to pack a lot of body bags victims in this house have no chance I'm Dennis Miller and this is a professional observation
80% of my training as a recruit is online. Watching videos on how to become a competent firefighter. This video highlights how important practical firemanship should be prioritised over the bullshit I’m getting. Cheers lads 👍👍
Your mechanical advantages are all wrong. Not trying to call you out but you are spreading misinformation. Mechanical advantage is a measure of the force amplification achieved by using a tool, in this case a lever. The mechanical advantage of a lever is the effort arm length divided by the load arm length. FORMULA MA= effort arm distance ÷ load arm distance. So in your example using the forks on a 30" bar; burying the forks to the crotch (5") leaves you with a 25" effort arm (lever) and 5" load arm. 25/5= 5:1 mechanical advantage. Not trying to call you out but we need to make sure we are spreading right information to the new generation of firefighters.
Leaving the door open adds oxygen, which generally speeds fire growth and likely changes the flow path of the fire towards you. (This building is implied on fire in this scenario.)
randomly watched this because I'm curious about the halligan bar, but for a very low-budget type production, this was very well done! I was especially impressed with how you didn't really stumble or hesitate, you spoke clearly and confidently and didn't waste any time. great work!
"it helps to go open palms" *doesn't go open palms* Great video though. Right to the point. I'll almost certainly never need this information, but, it never hurts to know. Plus, hey, maybe my yappin' will get it to the eyes and ears of someone who _will_ use it via YT's algo-magic. (Edited for typo.)
there it a fault to the way you're teaching to make the gap. the positioning of the firefighter when prying down on the haligan puts them in a potential bad spot if the haligan pops loose of its bite. that spike aiming directly at the firefighter is a real concern and needs to be mentioned. the idea of training is to put an individual in a position of muscle memory and not needing to think about the potential of catching a six inch spike in their chest if they slip. beyond that pretty solid video.
yeah - nice video- i remember using an original Halligan- they came out to the station demonstrating it when it was first coming out. man this was a lifesaver. memories of being irons and truckie.. oh and Hygiene Barry>? gotta be a story there.
Lots of book smarts but just lacking the real world experience. This kid is a great teacher and given some years of real world experience he’ll be a wealth of knowledge
I don't quite follow why the spike needs to be at 90 degrees to the adze? Wouldn't it work just as well with both on opposite ends of the shaft with the forks rotated 90 degrees so neither gets in the way?
Having the 90 degree offset is like adding an additional tool. It gives you a striking surface to utilize the spike as a lock breaker. It also allows the adz to be used with full mechanical advantage on onwards opening doors by penetrating a wooden or hollow metal door frame with the spike and, using the spike as the pivot point, allow body weight to pull down on the shaft of the tool to force the door face inward; usually just above the bolt location. Works great on institutional buildings like schools or dorm rooms with metal door frames set in masonry and solid wood or metal doors.
@@brandonseyfried1251 Hmm... Wouldn't moving the pivot point farther away from the adze reduce mechanical advantage by creating a larger arc of movement? I do see what you're saying, though - that's not something I'd considered.
While initial thanks would go to @adamsavage for introing the Halligan to us internet geeks, the gratitude to the folks who put their lives in danger to save ours is immeasurable. Thank you for such an informative video, showing the amazing work that firefighters do.
Good job to my brother and sister! The irons are my favorite tool. It is truly a versatile tool. Keep up the good work and most importantly be safe and always keep in mind the task at hand.
Us LEOs are now having to learn and utilize these types of tools. This was such a clear and concise video that even coppers who know nothing about this tool or technique prior to watching, would gain knowledge from it. This would make a great roll call video!
Hey guys, I just randomly came across your video and I am very impressed with it. I am an old timer who has gotten out of the job after many years but it is so encouraging to see young people learning good skills and also taking a role in teaching others. Look forward to seeing your other videos. Never stop learning and be safe on the job guys!
Very well done. Being new to the fire department this information is very important and helpful. Excellent job explaining everything in the video!
Tip to keep them interlocked. Set the forks on the axe head and drop it/slam it on a hard surface. In the fire service, we call this "Marrying the Irons". To unmarry the irons simply drop them or hold the axe upright and tap the end knob on a firm surface
This video is so boring far too much time contemplating learn to be this slow and you can specialize in body recovery make sure to pack a lot of body bags victims in this house have no chance I'm Dennis Miller and this is a professional observation
Thanks Conan
80% of my training as a recruit is online. Watching videos on how to become a competent firefighter. This video highlights how important practical firemanship should be prioritised over the bullshit I’m getting. Cheers lads 👍👍
глупость пожарные долго катятся - сам не спасешься - никто не поможет all right jack
Your mechanical advantages are all wrong. Not trying to call you out but you are spreading misinformation. Mechanical advantage is a measure of the force amplification achieved by using a tool, in this case a lever. The mechanical advantage of a lever is the effort arm length divided by the load arm length. FORMULA MA= effort arm distance ÷ load arm distance. So in your example using the forks on a 30" bar; burying the forks to the crotch (5") leaves you with a 25" effort arm (lever) and 5" load arm. 25/5= 5:1 mechanical advantage. Not trying to call you out but we need to make sure we are spreading right information to the new generation of firefighters.
Didn't show how to or when to use the spike tool. I heard it's for breaking locks, is it true?
great video
This guy is smart! One of the best videos for conventional forcible entry I have seen.
how did you get the 13.5:1 MA?
Amazing video but CATCH THE DOOR my friend if possible
Or you can just call the lock picking lawyer...... Or let the cops hit it with some 12g slugs while you kick your feet up and relax....
What is the point of closing the door immediately after the 10% search? If you're breaking into a door, isn't the whole purpose to allow ingress?
Leaving the door open adds oxygen, which generally speeds fire growth and likely changes the flow path of the fire towards you. (This building is implied on fire in this scenario.)
You would only need to bring a dinner fork to breach my flimsy front door.
Halligan was my great grandpas Last name.
I’m not a fire fighter but I do own a halligan. Found it on a job site I was working on. I am a contractor. This thing has been incredibly useful.
I remember using a Kelly Bar
@9:10 "inward swinging door, we're pushing in so have open palms for knuckles do not strike the door. You sure did not take your own advice.
Halligan! Where are my scissors?
I opened this video to look for this comment. May our weird little cult permeate the internet.
"Go open palm, so you don't crush your knuckles." Grabs bar with closed fist and pushes... oops.
randomly watched this because I'm curious about the halligan bar, but for a very low-budget type production, this was very well done! I was especially impressed with how you didn't really stumble or hesitate, you spoke clearly and confidently and didn't waste any time. great work!
Got rookies doing training videos? 😂
"it helps to go open palms" *doesn't go open palms* Great video though. Right to the point. I'll almost certainly never need this information, but, it never hurts to know. Plus, hey, maybe my yappin' will get it to the eyes and ears of someone who _will_ use it via YT's algo-magic. (Edited for typo.)
Its 4 AM and somehow I found myself here, while I may never use one of these at least now I got an idea of it. Would watch more.
Not even a firefight but I find this extremely interesting!
there it a fault to the way you're teaching to make the gap. the positioning of the firefighter when prying down on the haligan puts them in a potential bad spot if the haligan pops loose of its bite. that spike aiming directly at the firefighter is a real concern and needs to be mentioned. the idea of training is to put an individual in a position of muscle memory and not needing to think about the potential of catching a six inch spike in their chest if they slip. beyond that pretty solid video.
Really interesting and cool. Good work guys!
yeah - nice video- i remember using an original Halligan- they came out to the station demonstrating it when it was first coming out. man this was a lifesaver. memories of being irons and truckie.. oh and Hygiene Barry>? gotta be a story there.
Why is this guy 19 years old lol
Lots of book smarts but just lacking the real world experience. This kid is a great teacher and given some years of real world experience he’ll be a wealth of knowledge
Brilliant.
I don't quite follow why the spike needs to be at 90 degrees to the adze? Wouldn't it work just as well with both on opposite ends of the shaft with the forks rotated 90 degrees so neither gets in the way?
Having the 90 degree offset is like adding an additional tool. It gives you a striking surface to utilize the spike as a lock breaker. It also allows the adz to be used with full mechanical advantage on onwards opening doors by penetrating a wooden or hollow metal door frame with the spike and, using the spike as the pivot point, allow body weight to pull down on the shaft of the tool to force the door face inward; usually just above the bolt location. Works great on institutional buildings like schools or dorm rooms with metal door frames set in masonry and solid wood or metal doors.
@@brandonseyfried1251 Hmm... Wouldn't moving the pivot point farther away from the adze reduce mechanical advantage by creating a larger arc of movement? I do see what you're saying, though - that's not something I'd considered.
Setting the door looks like the bottom firefighter is in great danger being eye level with that tool
9:00 Do as I say, not as I do. 😅
While initial thanks would go to @adamsavage for introing the Halligan to us internet geeks, the gratitude to the folks who put their lives in danger to save ours is immeasurable. Thank you for such an informative video, showing the amazing work that firefighters do.
get the irons! awesome. adam savage sent me
12 year old firemen.
I’m not even a firefighter and I found this video incredibly enjoyable
as a burglar I concur
It shouldn’t be funny. But it is. I got into a full belly laugh twice.
Yeah pretty interesting video. Very useful tool.
Same
Good job to my brother and sister! The irons are my favorite tool. It is truly a versatile tool. Keep up the good work and most importantly be safe and always keep in mind the task at hand.
Quick tip when you are hitting from the one knee position try to put the opposite knee down so that you have more room to swing.
This by far the most interesting and informative fire fighter video I've watched that I'll never need to use.
Us LEOs are now having to learn and utilize these types of tools. This was such a clear and concise video that even coppers who know nothing about this tool or technique prior to watching, would gain knowledge from it. This would make a great roll call video!
Just don’t pick up the nozzle and spray from the door. Kills the light that could be used to search and steam burns to possible victims.
Too bad..... LEO's don't need to know how to break into houses.
If you respond to a fire as an LEO, do NOT break windows unless there is a confirmed rescue
Hey guys, I just randomly came across your video and I am very impressed with it. I am an old timer who has gotten out of the job after many years but it is so encouraging to see young people learning good skills and also taking a role in teaching others. Look forward to seeing your other videos. Never stop learning and be safe on the job guys!
Thank you for your service, fireman. I’m an EMT and I want to become a fireman.
Very clear video, great job.
Pov you just got back from watching Halloween kills
Great video guys!
That was very informative and a very clear easy to understand presentation
Where can I buy one of these tools in Canada? I’d like to carry it in my trunk, just in case.
Online they're not sold in store
Get ready to pay a loooot of money
Muito bom,eu sou bombeiro aqui no Rio de janeiro Brasil e uso bastante essa ferramenta.