วีดีโอ

@@makaiinfoeanalises está a trabalhar sem qualquer problema, como fiz overclock manualmente não teve nenhuma degradação.

Thx ✌️

For me, is the best of the 3 💪

Yup, you just need to have the right forge vertion.

Sim, podes sem problema

Hello, overclocking will depend on the quality of the silicon on your chip, it is not the same for everyone, these parameters have worked for me, so far I have not had a single problem and my system is stable. Just because it works for me doesn't mean it will work for you in the same way. if you want to test your system or cpu stability you beter use Prime95, AIDA64, PCMark10 and cinebench OCCT is good but i like it more to test PSUs and RAM. ⚠I warn you not to use Intel burn test max, it can cause damage to your cpu and motherboard ⚠ If I can help you in any way, just ask. Be well.

hahahahha 😂 you have no idea what you are talking, you even don't know how to read voltage of the cores properly. Bs video.

5.5 GHZ @ 1.2V WON'T BE STABLE LOL HE'S FULL OF SHIT.

the case have no LEDs , the leds ar from the fans , the fans ar simple , is a cheap case. cheers

E exatamente igual como o de atm8.

I flash the bios and directly use the 13th Gen, you do not need any CPU or ram to flash the bios.

hello @avia4281, Sorry for taking so long to answer, in short, I tried several programs and ways to control the rgb LEDs, almost all are incompatible with each other or cause each other issues , the only solution that worked for me was to use open rgb, It is a non-invasive and discreet program. you can also use SIGNALRGB but you need to create an account to use it. I hope I helped, my best regards. Open rgb: gitlab.com/CalcProgrammer1/OpenRGB

Did you tighten the contact frame in cross pattern? Also make sure if you cpu IHS is not bent or concave. the msi z690 pro is a very good quality motherboard , the brobem is the z690 quive way to much power to the cpu by default and oc genie is heavy on voltage , i recomend to you to manual OC the cpu ( i made a video about it) i recomend to you to chek my oc video: th-cam.com/video/RcwBf7ckc5o/w-d-xo.html note: the i5 13600k is a hot cpu and realy power ungry .for the thermal paste i recomend to you yo uze the Artic MX-6. my best regads.

@@fexergametech Sir i have asked some other pc building professionals they asked me to get a high end liquid aio like the deepcool ls720 360mm Or master master liquid 360L core Argb and i did noticed one thing that the thermal i used is from thermal right TF7 after evenly spreading it on the center of the cpu the paste moving towards the edges of the cpu and it also feels like it some kind of dried off

@@fexergametech sir i have also found that my pch temperature is always stays at 52°c and my system temperatures is at 42°c at idle condition but the cpu core temperature and socket temperature stays at 35-40°c at idle Does my motherboard causing heating issue?

@@ryzonixgaming The CM 240L v2 is only 180w TPD cooler and the i5 136000k can get over 200 w TDP very esy. So in this case your cooler is not enough for the i5 13600k.

@@fexergametechShould i go with DEEPCOOL LS720WH 360MM LIQUID AIO ?

tbm quero saber

Desculpe a demora em responder, tive que ficar internado devido a problemas de saúde: “CPU Lite Load” ajusta ligeiramente o vcore/consumo de energia do CPU de acordo com a qualidade da CPU. Quanto mais alto o cpu live mais vcore ( voltagem aos nucleos) vai fornecer.

sorry for the late answer : yes it will support 13th gen , i always recomende to update the bios first.

Sorry for the late answer, i had to be hospitalized due to health issues : i fix mine temps by manual OC , i made a video about it .

Sorry for the late answer, i had to be hospitalized due to health issues : this will depend on several factors: thermal paste, what kind of cooler do you have, if you have well applied the contact frame. the i5 13600k is an hot cpu and it will require at leaste a 200w TDP cooler.

😂

it will you will get -7ºc at least depending on the motherboard

@@fexergametech i have 13600kf, b760-p msi. 360 aio and my temps are crazy hit 100 while doing cinebench. many people told me it's contact issue. the frame will arrive in 3-4 days let's see what happen

@@fexergametech the temps is not great while doing cinebench test.. the temps dropped while gaming but the test is the same

@@NailsOffical most motherboard give way to much voltage by default , try to manual oc or lower the cpu lite mode

watch further ;)

Hi i installed the 16x2 ram sticks in 1st and 3rd slot it's cause my pc not booting and there is a red light signal showing on my motherboard but when I installed it in slot 2&4 my pc boots perfectly so is it an issue with my ram slot 1 and 3 or it is necessary to install ram in slot 2 and 4

he installed it wrong but change it to 2 and 4 later in video.

To flash the bios u canot have the cpu and ram instaled , you also need to the format the usb to fat32 and rename the bios file to MSI.ROM

So did you repair your motherboard?

The i5 13600k is a absolut beast off cpu, u Will get no bottleneck what so e ver, even whit a Rtx 4090. Yes is overclock at 5.20ghz p core whit the OC genie

Muito obrigado ✌

Tudo bem, obrigado, bem vindo ao canal. Uma 6800xt não aprova bem com o i7 4790k o gargalo iria ser de 67% em jogos 1080p, quanto ao watercoolimg tenho um coolermaster nepton 240m, um custom loop iria ser difícil de aplicar mas não é impossível.

Obrigado pela sua resposta eu tenho ryzen 5 3600xt com uma xfx merc 6800xt et 32go de ram em 3600mhz et o processador esta arrefecido pelo o watercooling cooler master 240mm alimentação de gigabyte 750w 80+gold Mas conto meter un ryzen 7 5800x3D Ou se nao o ryzen 9

Msi Pro Z690-A DDR4

Fans ar 1250 rmp max, use to idle at 800 rpm

@@fexergametech I can't adjust the speed of the fans

@@anltekin54 that Will depende on what motherboard you have , u can also use the programa call speed fan to control the speed

@@fexergametech motherboard msi h410 m b not set i tried

@@anltekin54 i hope this help : th-cam.com/video/sNSqBKGlH-A/w-d-xo.html

Na.... Is fine 🤣 is the perfect tecnique for lga 1700 👌

Yes but u Will need to update the bios first

You welcome . Dont forget to subscribe it always help . be well :)

Que cooler tens? O mais simples é comprar um adaptador. a.aliexpress.com/_EJQocRH

@@fexergametech tenho um xpg levante 240

​@@chikungunya_3732 a levante está a oferecer os kit para lga 1700. Não sei bem como funciona mas o link para entrar em contacto com eles está aki :corp.adata.com/us/support/online#

Obrigado amigo, já resolvi o problema e já fiz um vídeo sobre o assunto e até apliquei um contact frame, pode ver meu canal. Um grande abraço.

Posso fazer alguns , que jogo sugeres?

@@fexergametech cinebench, cyberpunk, hogwarts, apex, cod warzone, rdr2, pubg 😄 1080p and 1440p

@@Blendershick Eu fiz seu vídeo, o TH-cam ainda está processando. jogos: witcher 3 next gen, rdr2, cyberpunk2077, metro êxodo, warzone2.0, 40k darktide, atomic heart, god of war. aproveite 😉 Resultados Cinebench: minuto 15 do video th-cam.com/video/FUlY31QL7vU/w-d-xo.html

@@Blendershick th-cam.com/video/TkgxrcDYw-Q/w-d-xo.html

Desculpe não reparar no seu comentário mais cedo, estou atualmente a fazer um vídeo sobre isso. uma solução temporária seria reinstalar o TLuncher mas antes guardamos a pasta renomeada a parte , assim podemos ter vários mo pack e quando queremos mudar de modpack e só alterar o caminho do diretório.

support DDR4 5333+ MHz

i use the integrate flash bios on the motherboard, you dont need ram and cpu to do the bios update

@@fexergametech which version of bios i must download for this motherboard (Msi Pro Z690-A DDR4) and 13600kf cpu? the latest version [7D25v1A] or [7D25v17]? thanks.

@@amirrezaei4413 I've used the 7D25V1X version. Always use the latest available version, it contains all the microcodes for the new gen 13 cpus.

Em breve vou fazer um tutorial sobre como criar um servidor com o forge, abraço.

Demorou mas esta aqui : th-cam.com/video/EerXalQgJNE/w-d-xo.html

Me too! They are arriving on Friday. I will try to share my temps. I will be using the Nh-D15 cooler though.

@@christopherjohnson771 i fixed my temps, bought a thermalright contact frame, reinstalled everything, -7C in load

@@iplaybose The lga 1700 braket is crap and realy bendy, the contact frame is the best solution for now, I'm still waiting for mine, you also can lower the cpu lite load mode in oc advance settings , 12 is default , i set mine to 11, it lower 10ºc and improve my cinebench score. otherwise i do not recommend msi coolers for now they have really poor performance.

@@fexergametech yeppp, you are right, i set the lite load as low as 3, without really losing performance or having stability issues, everything runs butter smooth

th-cam.com/video/FUlY31QL7vU/w-d-xo.html here is my results

Haha pois e ! fiquei tipo WTF XD