hello , I would like to know the configuration of the motor gains , you're using , as I bought the parent company and not have a good reference to start and tune . hug and thanks .
Hello , my name is Nilton , I'm also adapting my m480l to fly with a gimbal walkera g3 - s with a RX100 III , (I love this camera :)) , my question would be: which battery is using and how far have control ? thank you. Your videos helped me a lot , thank you.
Hi, i use diffrent battery, i use 2x6000 mah 2x8000mah. 2x10000 mah flighttime dend how low you go, but i usually go down to 3,40v 3,50v per cell and then the flighttime is like 16 min 22 min 27 min
hi luiz, i use helical antenna and a mushroom antenna, and it works good, it also depends much on your reciver, not only antenna, i use ( ImmersionRC DUO5800 V4 32ch 5.8GHz reciver)
That's really impressive. I could only get mine out to 1/2 it's zoom range before jello set in. I use 1/125 shutter speed. But I hadn't balanced my props carefully. Have yet to try that.
after 5.30 i did adjust the gimbal just 1 step, and after that it was as good as it can be , i just got to much vibrations that i think ive solved, will do some recording later =)
i will upload the rx material from this flight also soon, i think this gimbal perform better than my last one, it seems important how you set the tilt and roll from your radio controll, that can greatly improve how the gimbal works when you start flying, for example, when i started to fly it looked good but when i did turn left the gimlab did roll much, after a few min flight i did change 3+ on the roll and it was perfectly horizontal and worked great when i did turn left and okey when i turned right, i got much shaking tough, but i am planning to change to tri blade, i have already ordered them, and also change how the gimbal hanging, from compresion to tension or what they call it=)
thanks that would be great (the pictures) i have a friend who is trying to make cables for me. the link you sent me of the 3 pin cable was that for the controller side on the gimble or the align vtx side? thanks kuller!!
Tim i use an 3s 1300mah battery to power the gimbal. I dont have the gimbal at home because i sent it back for repair. The controller gave up. And its not an good udea with a video with my swenglish ;) but i have some picture how you need to connect pitch roll to the reciver
great vid very smooth i just got my walkera g3s gimble for my sony rx100ii to fly with my align 690 any help you can give me would be very much apreciated i want to fly it fpv with the align vtx im thinking im going to need to make some cables and stuff HELP....lol any help would be great thanks... uavjuneau@gmail.com tim foster
looks amazing!! i just got my walkera g3s gimble to go with my align 690l im trying now to try to find out how to make it work with my setup are you hooked up fpv? any help you can give me would be great i need to make up some cables my emai is uavjuneau@gmail.com i had someone make me a 3d printed mount to fit on the align rails and now just trying to get it all working with my vtx setup thanks tim foster
yes it works with the align vtx/osd, but be very careful when you plug in the micro hdmiin the camera, i heard many that did break the hdmi converter cable, and it realy does fit bad, mine didnt worked very well from the box it did roll alot, and then the gimbal stop working so i sent it back for repair, but when you get the setting right in the camera it will give you very good result =) and about the fpv, the gimbal have a video out, it dosnt connect direct to the align vtx though, you need to find a plug that fit align vtx, i found plug from walkera that i already had that could fit after some brute force=)
thanks any chance i might find that cable to buy somwhere? or do you know what the cable was for that you found that is the only thing stoping me from flying rite now....thanks kullerbyt!!
i found that plug on walkeras upgrade tool so i just cut that cable off, but i think i saw someone in the align facebook forum that actually named the plug. i will try search for it
i never used the qr x800 with this gimbal, but i heard from other that it is underpowerd to fly with this and from other that they gets 20min flight time. the qr x800 is a great quad after you fix some things like lose motoramrs and things like that, the align 480 is perfect from factory and atleast twice as strong. the qr x800 is lighter and faster if you want to fly more for fun while the 480 is more heavy stable.
hehe, no i did actually turn it of my self, it felt like i had mud in the throttle stick so i landed it end turned of the radio then it just went up, i did never cut ot the motors before turn of the radio, very strange anyway. maybe it started RTL or something like that
Eric, i bought align m480l, that quad is amazing, this is what you want, but you need twice as big battery, so if ytou use 20000mah you will get 35min+ flight time with gopro setup, but it will fly so much more smooth, and back to the question about x800. this happened when i turned the radio off, i lost connection, so if your quad do like this maybe your reciver or radio is broken or have float/lose/slack dont know the word in english but i hope you understand, but to be honest i did never have a great deal of problem with my x800 it flies good but not comparable with align 480
if i fly slow it can be perfect picture, i still use ilook cam, but there is no jello here because its no sunlight, the ND filter is a must is its strong light , sunny conditions
yes, because i have taken off the engines that can take up and down the legs, its abit anoying to see the legs hehe will try to fix it but i want to save some weight
Nice
get a better videographer. Horrible
En dag återvänder jag till Trollhättan har bara goda minnen därifrån men. Jag ska hälsa på igen 👍😎❤️🎸
❤❤
Very good video....I love Sweden!😊
with how much speed of wind, the x800 can easily fly???
så ja
shiit va grym den e, najs
yes rx100m3, think iso is like 3200
rx100 III?
hello , I would like to know the configuration of the motor gains , you're using , as I bought the parent company and not have a good reference to start and tune . hug and thanks .
Hello , my name is Nilton , I'm also adapting my m480l to fly with a gimbal walkera g3 - s with a RX100 III , (I love this camera :)) , my question would be: which battery is using and how far have control ? thank you. Your videos helped me a lot , thank you.
Hi, i use diffrent battery, i use 2x6000 mah 2x8000mah. 2x10000 mah flighttime dend how low you go, but i usually go down to 3,40v 3,50v per cell and then the flighttime is like 16 min 22 min 27 min
Hello , thank you for answering
Which gimbal are you using with the Align OSD unit?
What battery are you using?
Kenneth Oslund 2x10000mah walkera brand, and also 2x8000mah multistar can get around 30 min and 25min flight time if flying gently
kullerbyt what batt do you like better? the 2x10k or the 2x8k setup? Also are you part the align facebook group?
they both work great but the multistar battery is 400$ cheaper hehe so i like them better
www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=65273
hi luiz, i use helical antenna and a mushroom antenna, and it works good, it also depends much on your reciver, not only antenna, i use ( ImmersionRC DUO5800 V4 32ch 5.8GHz reciver)
Dear sirs, I have a Align OSD + FPV Video Transmitter (2W) (HED00001), you could tell me what the best antenna RX? Thank you. Luiz - Brazil
thanks, yes it perform realy good, the jittering is because the damers is to soft so i will tryout something els, working for perfection =)
That's really impressive. I could only get mine out to 1/2 it's zoom range before jello set in. I use 1/125 shutter speed. But I hadn't balanced my props carefully. Have yet to try that.
ja det är hyffsat nu
Najs👌
I just connect pitch and roll to the reciver. And video out to a video transmitter
walkera g-3s gimbal
That's really amazing! My G-3S gimbal did great hovering or slow forward but just fell apart in the wind. FFF was impossible.
Hi, what gimbal are you using?! Thanks, G.
kullerbyt, Great video, you are more than welcome to join and share it with us: facebook.com/groups/alignmulticopterpilots/
why do you not fly yours ? to cold?
after 5.30 i did adjust the gimbal just 1 step, and after that it was as good as it can be , i just got to much vibrations that i think ive solved, will do some recording later =)
Was the roll off just a little to the left?
Can't wate to get my align 690 and walkera g3s in the air!!
i will upload the rx material from this flight also soon, i think this gimbal perform better than my last one, it seems important how you set the tilt and roll from your radio controll, that can greatly improve how the gimbal works when you start flying, for example, when i started to fly it looked good but when i did turn left the gimlab did roll much, after a few min flight i did change 3+ on the roll and it was perfectly horizontal and worked great when i did turn left and okey when i turned right, i got much shaking tough, but i am planning to change to tri blade, i have already ordered them, and also change how the gimbal hanging, from compresion to tension or what they call it=)
i got the helical antenna from hobbywireless.com/58-ghz-antennas-c-179_73_77/helical-axial-mode-58-ghz-rhcp-antenna-sma-male-p-802.html
And where did you get it fpvlr.com?
Hi sure do like that setup is that 5 1/2 turn directional antenna for your video or control thanks
I use 2x10000mah they are bought as walkera 10c but there is no information on them stickers etc. Just 2 black packages
thanks that would be great (the pictures) i have a friend who is trying to make cables for me. the link you sent me of the 3 pin cable was that for the controller side on the gimble or the align vtx side? thanks kuller!!
Tim i use an 3s 1300mah battery to power the gimbal. I dont have the gimbal at home because i sent it back for repair. The controller gave up. And its not an good udea with a video with my swenglish ;) but i have some picture how you need to connect pitch roll to the reciver
Hah, där har jag också flugit. Ingen FPV än dock
Thanks very much will get to work on cables!!!!!
great vid very smooth i just got my walkera g3s gimble for my sony rx100ii to fly with my align 690 any help you can give me would be very much apreciated i want to fly it fpv with the align vtx im thinking im going to need to make some cables and stuff HELP....lol any help would be great thanks... uavjuneau@gmail.com tim foster
looks amazing!! i just got my walkera g3s gimble to go with my align 690l im trying now to try to find out how to make it work with my setup are you hooked up fpv? any help you can give me would be great i need to make up some cables my emai is uavjuneau@gmail.com i had someone make me a 3d printed mount to fit on the align rails and now just trying to get it all working with my vtx setup thanks tim foster
yes it works with the align vtx/osd, but be very careful when you plug in the micro hdmiin the camera, i heard many that did break the hdmi converter cable, and it realy does fit bad, mine didnt worked very well from the box it did roll alot, and then the gimbal stop working so i sent it back for repair, but when you get the setting right in the camera it will give you very good result =) and about the fpv, the gimbal have a video out, it dosnt connect direct to the align vtx though, you need to find a plug that fit align vtx, i found plug from walkera that i already had that could fit after some brute force=)
thanks any chance i might find that cable to buy somwhere? or do you know what the cable was for that you found that is the only thing stoping me from flying rite now....thanks kullerbyt!!
i found that plug on walkeras upgrade tool so i just cut that cable off, but i think i saw someone in the align facebook forum that actually named the plug. i will try search for it
molex 1.5mm 3 pin www.fast-lad.co.uk/store/molex_15mm_connecter_with_30cm_lead_06009999-p-17569.html
i can not say to 100% this will work, because i dont know, but it is 3 pin and someone said it is this in the facebookforum
i never used the qr x800 with this gimbal, but i heard from other that it is underpowerd to fly with this and from other that they gets 20min flight time. the qr x800 is a great quad after you fix some things like lose motoramrs and things like that, the align 480 is perfect from factory and atleast twice as strong. the qr x800 is lighter and faster if you want to fly more for fun while the 480 is more heavy stable.
how do you like this combination compared to the RX100/G-3s on the Walkera QR X800?
Snyggt!!! Du verkar ha full kontroll på detta nu ;)
jag köpte Gopro hero 4 idag oliver , nu släpper jag snart värsta videon!! sjukt mycket bättre kamera, min ekonomi klarar inte detta intresset haha
lucky crash
Is the on and off switch to close to the throttles.
hehe, no i did actually turn it of my self, it felt like i had mud in the throttle stick so i landed it end turned of the radio then it just went up, i did never cut ot the motors before turn of the radio, very strange anyway. maybe it started RTL or something like that
kullerbyt mine is doing the exact same thing. I sent it back to the company I purchased it from? We're you able to fix it?
Eric, i bought align m480l, that quad is amazing, this is what you want, but you need twice as big battery, so if ytou use 20000mah you will get 35min+ flight time with gopro setup, but it will fly so much more smooth, and back to the question about x800. this happened when i turned the radio off, i lost connection, so if your quad do like this maybe your reciver or radio is broken or have float/lose/slack dont know the word in english but i hope you understand, but to be honest i did never have a great deal of problem with my x800 it flies good but not comparable with align 480
and it will hold altitude when you do highspeed, its like a new level of quad,
kullerbyt have you posted any video's flying it if so send me the video link?
if i fly slow it can be perfect picture, i still use ilook cam, but there is no jello here because its no sunlight, the ND filter is a must is its strong light , sunny conditions
How much battery power did you have left?
3.63 volts after 30 min flying with recording
team-blacksheep.com/products/prod:jelloguard_h2 www.walkera.com/en/showgoods.php?id=2615
i fly at full speed in manual mode
Great video no jello!! You got to tell me how you did it.
Nice smooth video, did you have your landing gear down the whole time while flying.
yes, because i have taken off the engines that can take up and down the legs, its abit anoying to see the legs hehe will try to fix it but i want to save some weight
Bravo! Nice and smooth!