- 77
- 56 144
BaneM
เข้าร่วมเมื่อ 26 เม.ย. 2010
Walksnail Goggles L - first test turned into long range - over 18.5km.
Testing Goggles L with Avatar HD Pro Kit (dual antennas, 32GB) on a trusty T1 Ranger.
This is a goggles DVR.
Camera is nice for lowlight, as this flight started at sunset.
#walksnail #avatarhd
This is a goggles DVR.
Camera is nice for lowlight, as this flight started at sunset.
#walksnail #avatarhd
มุมมอง: 1 016
วีดีโอ
VolantexRC Ranger 2000 - Runcam Split HD and WTF.OS OSD Recording
มุมมอง 199หลายเดือนก่อน
Test flight of Ranger 2000 with a DJI Vista with WTF.OS firmware and Runcam Split HD camera. ESC started to overheat to this was a rather short flight, but the Ranger landed safely. Only 1300mAh out of 4500mAh 4S 21700 DIY pack used.
Testing Heewing T1 Ranger with Nazgul T4030 props
มุมมอง 188หลายเดือนก่อน
O3 recording of T1 Ranger flight with Nazgul T4030 props. A bit more power and speed over stock 3830 props.
Arrows BEA Hawk 50mm EDF - DJI FPV and INAV - Maiden Flight
มุมมอง 239หลายเดือนก่อน
I always wanted to try an EDF plane, so I picked up Arrows BAE Hawk 50mm EDF on a sale and converted it to a FPV plane using DJI FPV system and INAV. I left the stock ESC, EDF and servos, but added Speedybee F405 Wing Mini FC with INAV 7.1.2, DJI Vista with Runcam Phoenix HD Nano camera, HGLRC M100 Mini GPS and Radiomaster RP1 ELRS RX. Battery used was a bit old CHNL Black 4S 1500mAh lipo. I wa...
Flying Atomrc Penguin Low To The Ground
มุมมอง 220หลายเดือนก่อน
Testing Atomrc Penguin handling when flying low to the ground in very warm weather (lots of turbulence close to the ground). Atomrc Penguing build: Penguin kit version FC: Speedybee F405 Wing with INAV 7.1.2 Motors: T-Motor Velox V2207 v3 KV1750 ESCs: Atomrc Exceed BL32 6S 45A Props: Gemfan 5552-3 (5.5" x 5.2 three blade) VTX/Cam: DJI O3 GPS: HGLRC M100-5883 RX: BetaFPV SuperD ELRS 2.4Ghz diver...
Atomrc Penguin - fast climb and doing loop 8 times in a row
มุมมอง 1062 หลายเดือนก่อน
Just trying Penguins climb rate, dive speed and how many times in a row it can do a loop
Atomrc Dolphin - A Minute of Buzzing Around
มุมมอง 1893 หลายเดือนก่อน
Just a short video of Atomrc Dolphin flying fast and low shot from the ground with GoPro by my friend. Top speed for the flight was 170km/h.
Hee wing T1 Ranger - evening acro practise
มุมมอง 2403 หลายเดือนก่อน
Just an evening joy flight and a bit of acro practise.
Maiden flight of an overpowered Atomrc Penguin
มุมมอง 6643 หลายเดือนก่อน
Today I tried my new Atomrc Penguin, but I think it has to much power :) Build: FC: Speedybee F405 Wing with INAV 7.1.2 motors: T-MOTOR Velox V2207.5 - KV2550 ESCs: ATOMRC Exceed BL32 6S45A ESC props: HQprop R42 (5.1x4.2x3) servos: 9g metal gear RX: BetaFPV Super D 2.4GHz ELRS diversity with 100mw telemetry GPS: HGLRC M80 Pro VTX: DJI Vista with WTF.OS Cam: Runcam Phoenix HD nano Antenna: Foxee...
ZOHD Altus Maiden Flight
มุมมอง 4953 หลายเดือนก่อน
Maiden flight with a ZOHD Altus. DVR recording from DJI V2 goggles. My Altus build: ZOHD Altus PNP - Motors: 2204-1870KV - ESCs: 30A - Servos: 4pcs 9g metal gear - Propeller: 3 blades R42 FC: Speedybee F405 Wing with INAV 7.1.2 FPV: DJI Vista (original DJI cam) with WTF.OS RX: BetaFPV Super D 2.4GHz ELRS diversity with 100mw telemetry GPS: HGLRC M100 Mini Battery: GNB 4S 6000mAh HV lipo (weight...
Atomrc Dolphin 10 Mile Challenge - DJI Goggles V2 DVR and Telemetry Overlay
มุมมอง 1.4K4 หลายเดือนก่อน
10 Mile Challenge (fastest to get to 10 miles & back home) with Atomrc Dolphin. Video is a DJI Goggles V2 DVR recording with telemetry data from FC blackbox and RC controller SDlogs. Overlay was done in DashWare.
Atomrc Dolphin and DJI O3 - 22.67km (14mi) out and back - long range test
มุมมอง 5325 หลายเดือนก่อน
Long range test of DJI O3. Battery used: shop.makerfire.com/products/gaoneng-gnb-15-2v-6000mah-100c-4s-hv-lipo-battery?_pos=1&_sid=e8f4d9576&_ss=r&aff=568
Flying with friends - Heewing T2 Cruza and Zeta FX-61
มุมมอง 5676 หลายเดือนก่อน
Flying with friends - Heewing T2 Cruza and Zeta FX-61
Flying a few meters above the ground - DJI O3 and T1 Ranger
มุมมอง 6936 หลายเดือนก่อน
Flying a few meters above the ground - DJI O3 and T1 Ranger
Dart250g - maiden flight at night / Runcam Night Eagle HD cam
มุมมอง 3276 หลายเดือนก่อน
Dart250g - maiden flight at night / Runcam Night Eagle HD cam
Atomrc Dolphin - speed tests - can it handle 200km/h?
มุมมอง 2626 หลายเดือนก่อน
Atomrc Dolphin - speed tests - can it handle 200km/h?
Hee wing T1 Ranger - a bit of acro flying
มุมมอง 2626 หลายเดือนก่อน
Hee wing T1 Ranger - a bit of acro flying
Hee wing T2 Cruza with an O3 and two-axis gimbal
มุมมอง 5327 หลายเดือนก่อน
Hee wing T2 Cruza with an O3 and two-axis gimbal
Atomrc Dolphin stock motor burn on 4th flight
มุมมอง 5388 หลายเดือนก่อน
Atomrc Dolphin stock motor burn on 4th flight
Atomrc Dolphin 2nd flight - testing efficiency
มุมมอง 5378 หลายเดือนก่อน
Atomrc Dolphin 2nd flight - testing efficiency
Runcam Night Eagle HD camera, test in the dark
มุมมอง 1679 หลายเดือนก่อน
Runcam Night Eagle HD camera, test in the dark
Hee wing T2 Cruza build - Speedybee F405 wing and other electronics
มุมมอง 1.7K9 หลายเดือนก่อน
Hee wing T2 Cruza build - Speedybee F405 wing and other electronics
Hee wing T2 Cruza - maiden flight (DJI googles DVR)
มุมมอง 7129 หลายเดือนก่อน
Hee wing T2 Cruza - maiden flight (DJI googles DVR)
Long range - pushing 20km with Hee wing T1 Ranger Pro and DJI O3
มุมมอง 2.1K11 หลายเดือนก่อน
Long range - pushing 20km with Hee wing T1 Ranger Pro and DJI O3
Aerobatics with Hee wing T1 Ranger Pro - DJI O3
มุมมอง 443ปีที่แล้ว
Aerobatics with Hee wing T1 Ranger Pro - DJI O3
Relaxing morning flight with T1 Ranger (DJI O3 onboard DVR)
มุมมอง 1.1Kปีที่แล้ว
Relaxing morning flight with T1 Ranger (DJI O3 onboard DVR)
Why you dont use.moonlight or the gt?
This was just to test Walksnail system, I mostly use DJI stuff.
I'm impressed! I'm thinking of buying a walksnail, on your video I see the osd that flashes from time to time. Do you have it in the goggles too or is it just due to the insertion during video editing?
No, flashes/slow OSD refresh appear in the goggles also, when the signal is bad and goggles lose telemetry.
@@branislavmitic78 thx
Incidentally I use around a 3rd of the 3000 mah pack for 6 mins, cells don't get hot either, loving your FPV with the Hawk.
That's awesome! I fly my Hawk with Molicel P30 4S Li-ion, lots of power, more speed and easy 6 minute flights ( videos on my channel) I've just subscribed to your channel. 👍
This is so cooool
Senang,ikut menikmati penerbangan yg lancar ini kawan.
So this is the runcam night eagle 3 v2 with the link, not the standalone camera, very good footage, thanks for sharing.
This is Runcam Night Eagle HD, a camera for DJI Vista. Video is a DVR from the DJI Goggles V2.
antenna stock ?really impress if that's the case
Yes, stock antennas.
video quality not as good as dji, osd is tho
Looks better than dji
I just ordered my walksnail GT vtx and the goggles L! Forgot to ask is the bitrate we see what you see down by the lower left different font? Thanks so much!!
lower line with bitrate, latency, etc. is the Walksnail font for the goggles, I don't think you can change that. Other stuff is INAV OSD, for that you can set your custom font.
Wow impressive!!! With my dji air unit at 50.8mbps as soon as I get to say 6-8mbps it gets so pixelated its hard to see, looks grainy too so with the walksnail at .8mbps the view looks great how is that possible?
I was really surprised with the image on such a low bitrate too.
Impressive efficiency for that speed. I usually get around 100 mAh/km on 3s, but I fly a bit slower, about 55 km/h. What is the takeoff weight of your T1 with this battery?
My T1 is currently 450g and the 4S 21700 battery is 290g, so AUW is 740g.
Brate ovo je super! Šta tek rade one druge goggles na kojima možeš da menjaš antene.. Čeka se video po nekom mraku sad.. :) Bravo!
I ovde se vidi koliko je kamera osetljivija od O3, let je završen posle zalaska sunca, već je krenulo da se smrkava i opet se sve lepo vidi. Sa O3 bi zemlja na snimku bila daleko mračnija.
Nice performance. What battery do you have?
4S DIY pack from Molicel P45B cells.
Hi, which motor/prop do you have on your setup?
Stock Heewing 1406 3150KV motors with Nazgul T4030 props.
Sold! I was looking for a video that shows the goggles max range.
@@dsmandrewa I was looking for it too for s long time, but could not find it, so I had to make it myself :)
Turn up that P-term on roll a little more, it can handle it and it will get rid of those pesky roll "vibrations". I've got mine up at around 34 now for roll P and it is locked in nicely. Also, try turning some filters down a little. The penguin doesnt need to be filtered to death. Also consider adding a rudder. Some good dicussion about this over on the rcgroups penguin thread.
This is the P-51 from Wltoys " Xk A280 model " this is a smal plain 560mm ( 56 cm ) Wingspan.. with Brushless motor .. keep this in mind it has a 2s LiPo 600 mAh Battery .. wolla mi amore . This plain is doable all for a beginner 3D - 6G sabilator . All complete with transmitter and battery. You ned battery fror the transmitter 6 pcs "AA battery that wil take you to the air for along time.. IT has lighting for dusk weather or night flying as well.. 1 this is a brushless airplain .. menas motor gong last for ever not burn out . 2 second .. you can conect Spectrum or Futuba Transmitter to it so you can fly your own transmitter. isn t that cool girls and boys .
What fc did you use ?
@@TheDroneNerd Hi, in my T1 is. SpeedyBee F405 Wing. Almost all my planes use SpeedyBee FC, I have four SB F405 Wing and three SB F405 Wing Mini. Just on one of the small planes I still have the Matek F405-WMN.
what motor/prop combo is used? Have you calibrated current sensor?
Hi, motor is Sunnysky X2216 II 1250KV, prop is stock 8x4 just nicely balanced. Current sensor is correct, confirmed battery usage on the charger. Battery was 3.95V after landing and it's li-ion, so lots of energy left on this flight.
Beautiful video. Motors upgraded as well or stock?
Motors are Heewing FX1406-3150KV and 25A ESCs, which is stock on newer bathes of T1 (on first batches motors were 1404 3700KV and 20A ESCs) .
@@branislavmitic78 Much appreciated. I will check mine and see what it on it. It's a great plane to learn on and I would like to be able to fly like it like you can fly yours.
What is the build? Also what camera are you getting footage with? It seems to be handling the shakiness well. I was flying mine on o3 without a flight controller, and it was ALL OVER the place. I could not fly low and straight without getting too close to the ground for comfort.
Hi, I've added the Penguin build in the description of the video. Video is recorded by DJI O3. Smaller video in the upper right is unstabilized DVR from Goggles V2 and big video is DJI O3 recording in 4K/60fps with a bit of Gyroflow stabilization (dialed down to 0.15 from default 0.2 smoothness).
Love doing high alpha with this airframe! Enjoyed the video!
Beautiful. That looks like fun..
Hey! Would you mind sharing stl for your dji o3 mount? Thanks
Whats the props on this flight? And did u use a pnp esc and motors?
Stock props and ESC's (updated 25A 4S ones), stock KV 3150 motors (T1 version 2 or Pro)
Just amazing I always enjoy seeing the clouds.
Great flight. Do you have any O3 overheating issues? I’ve read many do. If not, how do you keep the temperature down?
@@Lawzy Thank you. I have zero overheat issues on O3, I have a small heatsink with an selfadhisive double sided thermal tape and cut the hole in the nose of the dolphin a bit bigger plus vent grills in the front and aft hatch so there is plenty of airflow. I have flown it 35C weather for an hour and no overhearing.
@@branislavmitic78 thanks for sharing. That is a great solution. I’ll try it.
Great Vid. Stock T1 or upgraded?
Almost stock v2 version (with Hee wing FX1406-3150KV motors and 4S 25A ESC's), just props changed to Gemfan Hurricane 4024 props.
@@branislavmitic78 What differenze do you notice with the 4024 props? Love the T1 Ranger ;) - Nice flying
@@McLogo76 Not much difference from stock, just a bit quieter. I am currently using iFlight Nazgul T4030.
@@branislavmitic78 seen the newer vid 👍 I will also try the 4030. Thanks
Did you find yours to be nose heavy out of the box?
Hello, I received my wing but I can't program it. I have the same configuration as you. Can you make your file available please? Can you explain how did you flash stock ESCs ? Mine still beeping… Thanks for you help
Hi, I calibrated my ESC's in INAV, connected the FC to PC with USB cable, in the INAV Configurator went to Outputs, put Master throttle slider to max, connected the battery and lowered the slider to 0.
@@branislavmitic78 thank for answering Im still stuck Any ideas ? th-cam.com/video/7BntOT03y-4/w-d-xo.htmlfeature=shared
Kulijana za primer bato moj :)
40min is nuts.
Altus is not that efficient, I get more than 1 hour flight time with the same battery with my AtomRC Dolphin.
Great flying 👍 It looks like you’ve got everything going nicely. I’m really enjoying my Altus a lot.
Impressive. But why is the altitude blurred-out ?
yeah WTF?
Many people suffer from Acrophobia and like to criticize a lot...... BTW... nice flight.
I love the sound of the take off of a strong fixed wing!
Poor plane, he didnt wanted to fly ,he sayd”yooooo!”
Nice flight..... I am waiting for mine to arrive on the mail.... what is your video and radio setup?... did you used Inav 7 ?.... Thank you.... please, keep posting videos.
Thank you. I've added the build in the description of the video.
@@branislavmitic78 Thank you.... Greetings from Colombia
@@branislavmitic78 ...Great, Thank you so much.
Great flight! Impressive video reception at that range. Any chance you can post a link to the 3d printed mount for the triple feed patch antenna? I have an antenna like it and would like to use it with my V2 goggles...
Fantastic, I have this motor / ESC on my build I am currently working on .
That's a fairly good current draw for the speed. What motor and prop combination are you using?
Can you do a build tour of this? Love your vids by the way!
Thank you. I don't think there is much to talk about my T1 as it's almost stock (version with KV3150 motors). Just a FC and RX in tbe back and DJI O3 in the front. The only thing is 3D printed front lid to allow room for bigger batteries when needed.
Can you help me, please?! :) I have almost identical Dolphin (Speedybee f405, F90 1500KV, 4s 5000 lipo) and tried different pids, params, and propellers (7.4, 8.4, 9.4), and always absolutely always after 1-2 mins it starts falling by spiral. Can you share your inav version and diff? any suggestion and common mistakes? please :)
Great edit. Peaceful. How did you get past the 10km limit thought o3's had?
O3 does not have a 10km limit. Vista had 13.3km limit, O3 I think has 24km limit but I am not sure. Max I managed was 22.67km with O3 for now. You can see those flights in my videos.
The antenna upgrades on your Goggles V2 are doing a great job! I’m looking to upgrade my Goggles V2 antennas too, but also considering purchasing a pair of Goggles 2/ Integra instead, to enable me record OSD on the goggles. Have you considered Goggles 2/ Integra? Do you know of a way to upgrade the antenna setup on those to get the sort of range you’re getting now? Cheers! 😊
No, I will skip the Goggles 2/Integra because V2 work OK and I have better antennas for them and I am waiting to see if the Goggles 3 will support the O3.
@@branislavmitic78 please can you share details of how you’ve mounted that large triple-feed antenna on your V2. Is it a 3D printed mount? Thanks.
Yes, it's a 3D printed mount. I have mounting points on both sides of the goggles where the strap goes and the antenna is on a mount that attaches to them.
Great stuff! With o3, you can’t record OSD on Goggles V2, right?
Thank you. No, V2 cannot record OSD on O3, only on original Air unit or Vista using WTF.OS
Excellent job 👏 👍
th-cam.com/video/jEDJ3IcyrnI/w-d-xo.htmlsi=EixFWBhT0pvHubuh
Wow, great flight and range! Are you using stock v2 goggle antennas? I have horrible range with my v2 goggles vs my goggles 2 range with the O3.
No, I replaced the stock v2 antennas almost as soon as I bought them. On lover ports I have iFlight Crystal HD patch. On upper ports I usually have TrueRC stubbies, but for the longer flights (10+km) I put the big Geprc tripple feed patch with the 3D printed mount on the upper RX port (the right one when you look in the screens of the goggles).
@@branislavmitic78 ah, thank you for this information. It’s very helpful.
@@branislavmitic78 hi dude, triple feed patch array or triple feed patch ? from GEPRC?
@@juanpablohernandez4840 GEPRC Triple Feed Patch Array (the big one).
Ogm! good , Banem~