วีดีโอ

I shoot the Glock factory ball and cup sights accurate, but if I carry it I replace with either Trijicon or Ameriglo night sights or suppressor height sights; then shoot the heck out of it until I'm confident accurate with it to carry.

Awesome

Buy aftermarket screws for the SCS, holosuns screws suck and break all the time.

Took me a while, but I see it grazing in the background 😮

Slide in vise w a rag. Plastic punch (plastic roll from adding machine tape) ball pein hammer, drift out, left to right. drift in right to left. front sight w tool. 8 minute job in its entirety start to finish.

I carry my 43x when I got hunting too.

Hey man, great video! How did you install the draw check?

I'm kinda late seeing this video but I just bought the Stay Sharp 344 sharpening jig for sharpening my G5 Montec broadheads. It puts a 44 degree hollow grind bevel on the blades versus the 60 degree flat bevel that they come with.

Just bought one of there to use with my new recurve. Getting decent left right groups but not so much vertically. Eventually I will go with a limb mounted clicker but right now this seems like a great solution. Plus it's pretty cheap at under $20. Well done sir !!

Yeehaw! I've got a 60" Apache in the mail and she's a looker

Does it work with the gen 4?

great vid

I shot the following in NRA long range competition through a Remington 700 which was fitted with a 24 inch 1/11 twist cut rifled bull barrel from HS Precision: M852, M118SB, M118LR, FGMM 168’s, and FGMM 175’s . The most accurate ammunition at the 600 yard line was 168 FGMM and M118LR but M118’s recoil wore me out. At the 1000 yard line M118LR was best and with all of this variety fired in the 600 and 1000 yard competitions I won the American High Power Rifleman Award in Long Range. Of course, the M852 and M118 rounds are 7.62 match cartridges for M14’s used in competition but they shot well from my bolt gun, thousands of them. So no problems from my experience, and most of this ammo except M118SB could get me into the half minute arena at 100 yards. Also, since all of the 175’s use an MOA wind constant of 10 at 1000 yards in head math was able to help me properly adjust for wind in short order, which was a major factor in my success with it all. BTW, when the .308 came out Western Cartridge produced factory loadings with bullet weights as I recall from 110 to 220 grains so not good for use in M1A’s that came on the scene in early 1970’s since these rifles like the M14 were tuned to shoot projectiles from 147 to 173/175 grains.

This is an interesting concept. Just for curiosity, I used a CAD program to see what the angle at the cutting edge actually is for a 20“ diameter sharpening cylinder. If the distance between the back tip of the blades is 1“ [I don't have one here} the hollow grind angle at the back of the blade is 27.1 degrees and tapers to 30.0 degrees at the point. I’m not sure the 27.1 degree angle at the edge of the hollow grind at the widest point is optimal, but the idea of 30 degree angle at the tip for breaking bones tapering to a lesser angle to cut seems logical. Some knife makers use a 10“ diameter grinding wheel to cut a hollow grind on their knives. That works out to a 24.3 degree angle at the cutting edge and again for us, tapering to 30 degrees at the point. Maybe we should be using the 10" diameter?

Those groups are absolutely horrible.

Great advice. Thanks for sharing

My glock 47 has a polymer base plate cover. Guess they listened to you haha

Sehr schön! Got one like yours, a hybrid. Love it.

Have you tested Amazon's 'keaup lighted nocks'? I'd love to hear your feedback!

what's the barrel length on that beast?

That badboy can fit a whole row of corn straight out the field. Nothing like smoking jackfruit and beyond ribs for 24+ hours. As well as other living, high vibrational cruelty free foods

Is the recoil even significant? Im hoping so.. I love heavy hitters. Building a Glockzilla for my son and hoping that 10 has More power than the 40 cal. Going to put a huge comp on just for looks😮

In our club Norma 22 is the go to training cartridge, cheap, highly reliable and accurate enough for technical training of ISSF sports pistol and 22lr rifle 50m precision. SK and RWS are also excellent, especially SK Rifle Match and RWS Pistol Match, Eley unfortunately is too pricey we never tried them. Sellier Bellot Club 22 is also decent ammo for the price.

Fill a 5 gallon bucket up only half way with the corn. 2 gallons of the cheapest fruit juice you can find. Usually the store brand. 2 tablespoons of yeast 1 packet of fruit Jello Mix and set in the sun with the lid cracked or your bucket will expand and potentially pop. As the corn soaks up all the juice, fill with water each day to make sure the water is slightly above the corn. After 4 days or longer the "Slop" is ready to be placed out. Use a post hole digger to go down about a foot and fill it up with the slop. This will cause the Boar to stay in one spot and root the ground where the slop is. Pour the rest around your hunting area. Good Luck!

Thanks for the work you put into this test, it’s helped me alot

I made that same mistake. Bought a huge G40 and put a carry red dot on it. Same holosun matter of fact. Then I decided to do it right so I won’t have to rebuy parts. The pistol with all 7 mags totals up to $5,100. Bought it stock for $750

How do you love it??? What’s the update??Thanks. I have a g40 & will get that optic.🙏

Gotta lean in when you shoot

ɪsɴ'ᴛ ʀᴇᴀʟ ɢᴜɴ?

Do not fire .308 Ammo on a rifle that is stamped 7.62x51. The Chamber pressures of this rifle you are using is designed for 7.62x51 not .308. The .308 Ammo will exert an additional 12,000 PSI on that chamber which could result in the warping of the chamber, and in some cases a catastrophic failure of the chamber wall casing injury to the user. On the other hand, a chamber stamped as .308 can fire both .308 ammo and 7.62x51 since it can handle to lower pressures of the 7.62x51. Don't let anyone try to sell you .308 Ammo on a Rifle that is chambered 7.62x51. There is no excuse for not being smart about this. This type of information can get people hurt thinking its ok to fire .308 on a rifle stamped as 7.62x51.

I took some of that wolf out last weekend .23 out of my same rifle guess my barrel likes that shit, SK HV shit .45 where yours shot the lights out, just never know

Comparing expensive hamskea to the lower priced Qad isn't realistic

Thanks for watching! Hit the THUMBS UP if you liked the video and click SUBSCRIBE if you want to see more. Let me know in the comments what questions you have and what videos you would like to see next. I appreciate all feedback and support.

Thank you. You're the only one who prepare hog bait without artificial sht. Hat off.

I have a POF Revolution DI 308 16.5” barrel. I’ve purchased many different manufacturers and grains of ammunition and found anything lighter than 150 grain is huge groups like 2-3 moa. Hornady Black 168 grain is 1/2-3/4 moa consistently. Federal Go;d medal match is also under moa five shot groups. The federal ammunition and Hornady is the majority of what I shoot. I’ve found Winchester ammunition in 308 and 556 is crap. Very inconsistent velocity which equates to large groups. Shorter barrel normally needs heavier grain to stabilize for good groups.

Thanks Phillip Stay blessed

Hey Phillip,Can you tell me where you got that pedestal seat,and who made it? thanks

Thanks for watching! Hit the THUMBS UP if you liked the video and click SUBSCRIBE if you want to see more. Let me know in the comments what questions you have and what videos you would like to see next. I appreciate all feedback and support.

just seen this great job i will be trying this it called "Sharp 344" cheek it out

You get what you pay for as the old saying goes. My Armalite AR-10B, which costs 2K+ but will shoot 1inch groups or better at 100 yards using AAC match ammo. Maybe, you should try AAC ammo or upgrade the barrel to a match grade barrel. May I suggest a Ballistic Advantage 20" Heavy Profile barrel and have it fluted to reduce weight. You will be getting 1 MOA groups after a little upgrade! You can't beat that for only $250.00

Thanks for watching! Hit the THUMBS UP if you liked the video and click SUBSCRIBE if you want to see more. Let me know in the comments what questions you have and what videos you would like to see next. I appreciate all feedback and support.

I know the pain

I hate when I work on something and realize I was doing it wrong the whole time and I have to restart

My rpr likes the Norma tac but the black box. Haven’t tried the Norma red box yet, I did manage to get 2 boxes of it yesterday. Gonna head out to the range this weekend hopefully weather cooperates!

I learned today that you dont want a bow in your bow😂😂 learn something new every day thanks friend

A 3 1/2-year-old deer is not young up here in northern Minnesota.

the suppressor just ties it all together

such a great looking rifle.

I'm not sure which latitude generation latitude saddle that is but the Latitude 2 is what I would buy. I was fortunate enough to get a Custom saddle rated to 400 lbs. a couple of years ago that's very much like the Latitude 2 for fit & comfort that I'm thinking about just getting a Latitude 2 to have as a backup. My custom saddle is very similar to putting on & sitting in as the Latitude 2. I'm an Arborist by trade & know the advantages to Amsteel but I like the webbed strap better for feel that my custom saddle has. A very small diameter Amsteel which will float in water for being lightweight, but the webbed strap will help me control my movement just a little bit more when I have to move & position for a shot. But the latitude is similar to my custom saddle when it comes to putting it on & riding 2 miles on my bike to a destination. I used to think that my New Tribe flex made saddle that was in a Predator camo finish was nice until I upgraded to a mesh style saddle. U need to have comfort & flexibility when saddle hunting. When I talk to people that have Tethrd it seems that all it is about is buying. Into a brand that sells u more accessories to add to it that in the end just adds to hip pinch. It doesn't have to be that way. I have pants that I can fit layers under & these pants have knee pads that have the pads sewn in between 2 layers. With that I can stay more stealth & if it's dead calm I can put a pair of fleece pants over them. I have some knee pads but I've never worn them once. To me Tethrd is just another stick climbing corporate community that makes u invest in multiple items. I climb with a rope for more than one reason. It's the safest, the most stealthy & it makes me use less metal which is the most important when it comes to being a minimalist. I'm trying to go in light 1st & foremost. 😅😮🎉

Nice looking Bow 🏹😊