วีดีโอ

sweet diy repair! nice use of fast forward instead of magic jump cuts and also getting the right angles. if ya ever do the 2x heater hose quick disconnect lines, i've only seen one person replace it with the metal dorman upgrade, and would like to see how you'd go about the process. cheers!

Will it work on a Tahoe 01 too by chance

it was a crude old video but it helped. i used plumber seal liquid.

What’s the I farted and it was liquid song doing on your playlist 😂

Hello there . My Daysy 93 Beretta style after firing with maintenance cartridge the after the second normal cartridge started to leak so much from the upper side of the gun.

With loosing coolant do you have to add coolant & bleed the system after?

Thanks bro totally fixed mine

That's great thanks

I have one of these pistols. I like it but it does have an air leak. At the moment it doesn't for some reason and I surmised that this pistol is fitted for certain CO2 cartridges. It's a very complicated gun and I don't like springs popping out everywhere been there done that with carburetors LOL so it looks like if I get into that cylinder and put that plumbing tape on that should stop the leak.

"A gesure of disapointment annd shame and failer "😮 Bro your attitute reminds me of me GREAT video.

Thank you for uploading this video it helped me find the leak on my 2001 gmc yukon it had a small leak on that same plastic fitting I got the same exact metal fitting from doorman and installed it just how did.

Is the pup still alive

Thought this was how to fix leaking CO2. Not how to take your gun apart and put it back together. Good God. BTW. I think you left your bathtub running

Thanks bro!

I stupidly left a CO2 capsule in my 15XT and it naturally destroyed the seals so it leaked whenever I put in a new capsule. I followed your instructions and took it apart, wrapped some Teflon around the threads on the cap of the large cylindrical part. I put it back together following Part 2 of your video. No parts were left over. Now, it no longer leaks, but it won't fire because I can't make the trigger move back. Any suggestions?

The so-called weight thing is a counterweight. A necessary item needed for balance of the BB gun pistol. Everything in a BB gun is very important and necessary for operating it properly.

Ngl lie this shit smoother than Michael jackson

Thanks for the tutorial.. I had it all good except the direction of the trigger spring.

Can you recommend where I can send my Daisy Powerline 92 for repair? (Leaking CO2)

Can you recommend where I can send my Daisy Powerline 92 for repair? (Leaking CO2)

Thank you so much! your clear instructions allowed me to fix it in about 20 minutes, my Daisy works again!👍

I for some reaskn have a left over piece its a small black piece it has a ball thats attstched to circular ring where does it go 😭

SUCCESS 😉 .... Thank you, my pistol works like a charm !! No leaks detected yet, and it fires perfectly !!! You did a great job with your video !

I'm impressed. Great video. I'm going to attempt to fix mine tomorrow, same leak. Thank you, yes I'll let you know if it works.

Can you do one where u fix a trigger

I was going through some stuff while cleaning and found this Powerline 15XT from at least 10 years ago and I tried to shoot it but it was leaking the gas, and I was going to dump it when I found this video and said “why not try to fix it” and after 1+ hrs…. I was shooting again in my backyard. Thanks for uploading this video

32yrs ago I used this video to fix my grandson's gun. This time he was going to fix it himself, which he promptly abandoned when he got it opened. He & I used your video to put it back together and now you're the big hero, good job! Tip for others who are trying to fix a 15xt, use the thread tape it's the only thing that works long term and good luck! Thanks again!

I have the same model , mine leaks the tank off really quick at the pierce point when installing the new tank , do you know what the problem is. I cleaned the piercing area and used three new tanks trying. No luck so far.

My Dad bought me an original Daisy Power line Model 92 CO2 pellet gun in 1987-88 , loads in a tube from the front , that I'm working on fixing at the moment .

I'm 4 minutes in are you ever going to show us how to fix it or are you just going to talk about the screws and talk to your dog

Thanks for an outstanding video!!

I wasn’t expecting this to flow so well and be so nice. It’s way better than “just one show”’s pilot or in general now that I think of it

I found u from going to the crab eating an onion ring video, going to the comment where they pretend to eat with the crab, going to the replies to that comment, then accidentally clicking on u lol

You should re-do this vid with better camera focus and better lighting and try to use the correct part names and show every step correctly. For example I got the safety in backwards because I couldn't see what you were doing and you zipped right through it. It is possible to get some of these parts in backwards or reversed if you've never done this before. Otherwise, thanks.

Thanks you man!, this help me a lot. Greetings for chile

Thing, things, thingy, doo-dad and doo-hicky. Excellent! Use better camera and trim your nails. Yuck-o!

Thankyou this helps sooooo much Ily

This is second time doing this (tho I was using auto sealant semi -permanent/flexible trying same way ..if fails again will likely do what should have done use sealant around plastic do dad and pipe tape for threads ... also need to take them seriously TO NOT LEAVE PRESSURIZED CO 2 WHEN NOT USING .....

I know I am way late but by any chance do you know what size the O ring is for the co2 compartment? My O ring came out when a cartridge got stuck and now as soon as I put a new cartridge in, it punctures the top and then just leaks til it's empty. ALL I need is a new O ring but can't get to it to measure it lol

OMG.are you kidding?

So what actually fixed it the leak?

Well I’m pretty sure this is the video I’ve been looking for... it’s already after 9pm so I’ll be trying this fix in the AM! Pray for me TH-cam... there’s a high probability of choice language throughout the day!🤞🏼

You was great. Thank you very helpful

Dude, you are the man! I put a lot of time into painting my bb gun and was mad it broke but I fixed it with the help of these 2 videos. Thank you so much. I liked and subscribed for the awesomeness. I had to assemble it a few times before it all worked but I'm happy now

couldn't have put it together without the video, thanks.

Why so many hater in this comment section? also thanks for the vid.

My gun just sprays out all the c02 as soon as i tighten it

Excelent thanks you

Thanks man, I was about to throw it out. This helped me tons . I’m back to shooting bbs!

TH3C001 ❤️