- 10
- 193 781
Aprilia SR50 Customs
Netherlands
เข้าร่วมเมื่อ 2 มิ.ย. 2016
This channel is mostly about my hobbies
La Pista Infinita handlebar stem | Yamaha Aerox Bws, MBK Nitro Booster
Second generation handlebar stems for Yamaha scooters.
Versions long and short suitable for Yamaha Aerox, Yamaha Bws, MBK Nitro, MBK Booster.
- 6061 aluminum high precision CNC, polished, anodized
- Internal anti-rotation design at the bottom and at the top
- adjustable at 120 degrees
- supplied with inox screws
The stem adds great aesthetics look to your custom aerox project or booster project.
Advanced technologies were used to achieve the superb quality of the part which is expected from high-end tuning enthusiast.
For contact - LaPistaInfinita (Facebook & Instagram)
Versions long and short suitable for Yamaha Aerox, Yamaha Bws, MBK Nitro, MBK Booster.
- 6061 aluminum high precision CNC, polished, anodized
- Internal anti-rotation design at the bottom and at the top
- adjustable at 120 degrees
- supplied with inox screws
The stem adds great aesthetics look to your custom aerox project or booster project.
Advanced technologies were used to achieve the superb quality of the part which is expected from high-end tuning enthusiast.
For contact - LaPistaInfinita (Facebook & Instagram)
มุมมอง: 533
วีดีโอ
Antenna disassembly and repair mercedes w169/w245
มุมมอง 16K2 ปีที่แล้ว
When I bought the car the antenna was already repaired once by the previous owner and soon fell off again. Easiest way to reach it is from the light on the ceiling. While people were asking 100eu on ebay kleinanzeigen for a second hand I fixed it much cheaper.
Handlebar stem aerox, aprilia sr, gilera runner, peugeot speedfight (stage6 ssp)
มุมมอง 7872 ปีที่แล้ว
Want to buy? : Contact me on Instagram lapistainfinita Versions: - Aprilia SR - Peugeot Speedfight - Gilera Runner&NRG - Yamaha Aerox La Pista Infinita
Stage6 R/T Oversize piaggio Variomatik Unboxing & Weight
มุมมอง 5K3 ปีที่แล้ว
The aprilia is getting new stage6 r/t transmission with which I hope the scooter will run much better than the old Malossi MHR La Furia Rossa where I had issues with adjusting it. Also, I will modify the coolant passages similar to the Malossi RC/C-One crankcase to lower the engine temps. Instagram: apriliasr50customs
Rear 4k brake caliper adapter Piaggio/ Malossi RC-one | Stage6 R/T, Voca, RPG hinten adapter
มุมมอง 3.1K3 ปีที่แล้ว
Rear brake caliper adapter for piaggio engines(aprilia sr, gilera runner, nrg...) and Malossi RC-one/C-one crankcases in 3 different versions. Instagram: lapistainfinita -will be made of aluminium 7075 -compatible with stage6 R/T, voca racing, RPG(racing project germany), RPM, Adelin brake calipers Version 1: -fits piaggio & malossi RC-one/C-one crankcases -only to be used with A...
Aprilia SR 50 Beast Unleashed stage6 R/T 70 piaggio #4
มุมมอง 10K3 ปีที่แล้ว
Dream came true. Still room for improvement in acceleration and top speed, will work on that. Part 1: th-cam.com/video/AmsC6GXbfDs/w-d-xo.html Part 2: th-cam.com/video/7PsObpwuFMU/w-d-xo.html Part 3: th-cam.com/video/MRE_9yfc0dM/w-d-xo.html Cylinder / Zylinder - Stage6 R/T 70 piaggio Crankshaft / Kurbelwelle - Stage6 R/T 85mm Bearings and Seals / Kurbelwellenlager - Polini Evo Metal Separator E...
Aprilia SR 50 R - Something More Than a Machine | My Story
มุมมอง 33K4 ปีที่แล้ว
This video describes in details the before-story of my Aprilia before the R/T70 project. I love my scoot Setups: 2015-2017: Top speed 90-100km/h -Dr Evo70cc piaggio -Stage6 Pro Replica -Stage6 Sport pro variator 6.25gr x 6 rollers, stage6 medium torque spring -Stage6 clutch MK2 Racing -Stage6 Bell -19mm motoforce carb, jet 85 & malossi airfilter -original crankshaft -original half-pulley -origi...
Aprilia SR 50 R Stage6 RT70 piaggio project (custom seat) #3
มุมมอง 7K4 ปีที่แล้ว
The scooter needed to be finished summer 2020 but cause of corona had to spend my time in NL, succeded to go back to BG only for a few days. Not much happened with the scooter but decided to make this short video with the latest updates, a lot of people were also asking whats going up with the project... Overall not so much work is left but have to wait for a opportunity to get back in the gara...
Aprilia SR 50 R Stage6 RT70 piaggio project #2
มุมมอง 45K5 ปีที่แล้ว
Small progress on the scooter during the christmas holiday. Part 3: th-cam.com/video/MRE_9yfc0dM/w-d-xo.html Part 1: th-cam.com/video/AmsC6GXbfDs/w-d-xo.html&t Cylinder / Zylinder - Stage6 R/T 70 piaggio Crankshaft / Kurbelwelle - Stage6 R/T 85mm Bearings and Seals / Kurbelwellenlager - Polini Evo Metal Separator Exhaust / Auspuff - Stage6 R/T 70 Ignition / Innenrotorzündung - Malossi MHR Digit...
Do you have Instagram?
@@senorgfs9459 yes . Lapistainfinita
Hello have to ask did you run the DR and sport pro kit on stock piaggio crankshaft?
Yes, around 17000km combined. Stock crank is capable.
@ thanks bro and is DR70 best cast iron kit to buy?
@@ApriliaSR50Customsoh sorry i didnt saw the description sorry for asking about crankshaft…btw respect for putting something like this on youtube❤
@stefan2741i think stage6 streetrace and malossi sport also good if you dont make mistakes when assembling and jet correct after.
@ thanks for the info man👍💪 just respect
A very beast! I have same model but yours is too beautiful.
2t power full!🎉
Nice video bro.
è fermo !!! hai sbagliato qualcosa nel montaggio.... inoltre è magro .... aiaiai.......
I know, I am fixing it now.
Collectors need a SR 50.. mines 2001.
Did you bought this custom or did u maid it yourself
Where die you get the Body Kit from whit the seat
And the Seat
Also custom made
Where die you got the Plastik Body from
Custom made
From a website or u made ist ur self@@ApriliaSR50Customs
how much is the weight of Polini Speed Drive Evolution 3 ?
I dont know
Hello do you remember what and which size of the gaskets you used for mk2 racing .?? 🐎
They were part of the kit. Or you ask which thickness? I dont remember.
@@ApriliaSR50Customs the thickness.
Plug and play or do have to modify anything as in milling
What exactly did you do to cancel the oil pump?
Remove the oil pump, and optionally remove oil lines and oil tank
how much do you need to upjet if you put a stage 6 viton short intake?
Leave it as it is. Why do you need to upjet? Check spark plug
Hi where is the seat cover from? 😊
Custom made by AVTOINTERIORI STANI-M. Varna, Bulgaria
Where can i order?
Instagram or Facebook “lapistainfinita”
Cosa aumentano questi correttori ?
Do you still have the R/T Project?
Yes
@@ApriliaSR50Customs do you have instagram or some contact?
Malossi still nr.1
Can I ask some questions related to the brakes on my scooter Benelli Velvet which is using stock GRIMECA Malaguti f12 or Aerox brakes?
Пиши на бг
And nobody comments Nfs 5 Porsche soundtrack 😮❤
I cant find those god damn foot plates I've searched all the internet for them
hello, nice build! i wonder where you got the piece of plastic above your wheel from, i got the one where it is attachted to your exhaust and to your air filter, but when i want to place a different air filter it sits on my wheel… where did you get it from?
the rear mudguard you mean?
@@ApriliaSR50Customsyes, the flap above your wheel between the exhaust and the original air filter
Search for piaggio nrg rear mudguard in google. There are tons of websites where you can buy it
@@ApriliaSR50Customs ok thanks! won’t have to adjust anything? it fits ready out of the box?
its a stock part for piaggio nrg so yes @@mikanb3007
where did you find the crown for the kick starter for the piaggio engine?
I don’t understand what you mean
Do you think i can run a streetrace 70 on stock crankshaft?
yes
I want to put Streetrace 70cc Stage 6 pro replica or yasuni R Stage 6 mk2 dellorto 19mm Malossi E15 Air filter Reed petals polini carbon fiber 0.30 Malossi multivar with 5g rollers White malossi contra spring Red Clutch springs Should i go for streetrace, malossi sport or dr evo? I want top speed and power. But i want to run it on stock crankshaft
All three kits are ok.
@@ApriliaSR50Customs Which one should i go for?
@@Sr-db4ql you wont go wrong with neither of them. Back in the time i bought dr evo because it was the cheapest around 120eu in 2015
hi, i want to tune my aprilia sr too. i have question will naraku pwk 21 carb fit in stage 6 r/t intake manifold? manfold is 28mm
According to stage6 this manifold is suitable for 21mm to 28mm carbs
@@ApriliaSR50Customs yep but manifold is 28mm and naralu pwk 21 is 35mm so how will it fit
@@Sa1nt_LT stage6 rt manifold is suitable for carbs 21-28mm. The hole of the manifold is a bit larger than 28mm and also flexible ruber, it is ment to expand when you put the carb in it
@@ApriliaSR50Customs ohh thanks! it will not fall out?
What is your opinion about motoforce carbs, are they as good as Dellorto? I want to buy a 21mm MOTOFORCE PHBG RACING RED EDITION
What cc do you have? Motoforce will do the job. For 70cc sport class 19mm is perfect. 21mm no power gain only fuel consumption gain
@@ApriliaSR50Customs i have 50cc atm but i want to get dr evo 70
Where did you get the footplates from?
Look up for "aprilia sr lennes trittbleche" if you are able to find them anywhere in stock. Mine were from amazon or ebay dont remember
@@ApriliaSR50Customs I didn’t find them in stock. Btw how did you adjust the air screw on your sr50?
I converted my dellorto 17,5 from auto choke to manual, when i cold start the bike with the choke on it doesn t keep idle and dies, when i start it with the choke off then it bogs sometimes and then works fine. Why is it not idling with choke?
@@Octavian17 search for carb settings manuals on internet and read. You need to understand what settings affects what. Cant help you remotely.
How fast did it went 😮
This was an awesome watch, Well done brother ❤🎉
Знаеш ли къде се намира казанчето за маслото
До казанчето за антифриза. В предницата
I have the same problem. My wife! Where can I look to find the "stl" file?
@@ApriliaSR50Customs, people like you put all the work in the stl file, others just think they can download it for free omg, 5 bucks is very cheap. Mfg.
where can i buy it ?
Search “La pista infinita” facebook & instagram. Contact me there
Hey man, beautiful aprilia. I got one as well and I want to remove the rear splash guard (the original one) and put one similar to yours to cover the flash cables and it more beautiful from the outside. If you didnt understand I mean the plastic where you have attached the licence plate on your scooter. I have done some research but I havent found anything, can you tell me how that part is called or where did you buy it yourself? Thank you if you respond.
Hi. Remove the original fender which is attached with two bolts. Drill new holes in the license plate and screw it in on the same holes from where you removed the fender. I dont recommend doing all of that. I had problem with the police and had to bend the plate so it can be more visible, also there are two additional holes now drilled in it. Now my plate is on the left side of the wheel attached with a L shape bracket to the engine
@@ApriliaSR50Customs Thanks for the quick response. The problem is that my Aprilia is an Sr 50 motard and the fender is all one piece, it's not attached with 2 bolts. In case I will cut it 😅😅
Здрасти с каква електроника си в момента?Защото аз не мога да намеря никаква,защото съм с вал малоси мхр на 85 биела и електрониката на стейдж 6 не става.Пък иксам ако може да има и фарове и мисля да поръчам Mvt,обаче пък за Mvt-то пише че за скутери с пиаджо двигател само преди 2003.И също ти дали имаш и продаваш някоя?
Аз не продавам. В момента съм с pvl с cdi на r&d italy. Ползвам ръчно изработена литиева батерия за захранване на всичко по мотора. При теб защо да не става кое точно не става?
@@ApriliaSR50Customs Ами в скутер атак пише че всички елктроники не стават в моя случай ,заради вала .
@@ApriliaSR50Customs А някакви хай-енд части като торк,вариатор,гърне да продаваш?
@@mirafiorimotorsport5678 нищо не продавам. А за ротора е така както казваш. Трябва ти ротор на малосси. Шанс да намериш някоя която да е и алтернатор май няма
how much did it cost you
[̲̅p][̲̅r][̲̅o][̲̅m][̲̅o][̲̅s][̲̅m]
hello, I loved your video. You have experienced so much with your SR50 R. I am wondering if you know how to change the AC connection of the headlight to DC to use led headlights. If yes, then could you please enlighten me.
hi thank you. Тhere is a cable i think yellow color that goes from the alternator to the switch for low/high beam, its hidden in the big bundle of cables that goes to the cockpit/tacho. Cut it and extend it with direct connection to the positive output of the ignition key (the ignition key has three cables connected to it, ground, positive input and positive output). I dont remember the colors there but with multimeter and turning the ignition key on and off you will find out which cable is the positive output. Now you have direct current to the bulbs and can install led or xenon (i tried them both, its working).
@@ApriliaSR50Customs Thank you very much for the details.I will check the cables and try it.Hope I can be in touch with you coz I have to learn a lot about SR50R and I am a novice regarding the tuning process.
Hello, don't you have an oversized spacer drawing? The project is great.
Hi, they are 15mm in height. Other dimensions are out of my memory and cant check them because the bike is not with me now.
Top aprilia v bg li e
Хаха да тука се подвизава :D
start making custom rims like gyronetics black diemond or polini
It should be called aprilia sr70
I loved my sr50, used it too commute back and forward to work. Wish I still had it.
Where is the rest of the build?
In my videos
Where did you bought that thing that covers radiator?
Search in google “tuning aluminum grill mesh”
@@ApriliaSR50Customs is it custom made?
@@svenp.2 yes
Your set Up ?
Magnifique l'ami ✌️ Marc Bara 😉
this was exactly what i was looking for... s6 torque driver weight, thx