- 105
- 175 841
Stuff Bobby Does
United States
เข้าร่วมเมื่อ 18 ม.ค. 2007
Working land and doing other things.
วีดีโอ
Load & Unload with the Giant
มุมมอง 452 หลายเดือนก่อน
My new 50 gallon bulk fuel storage from Amazon. Converted to 110 volts.
Yitamotor xfer tank
มุมมอง 272 หลายเดือนก่อน
I bought this so I wouldn't have to be running to the gas station with 5 gallon jugs. It's advertised as being 55 gallons but it only holds 50, and 5 of those are unusable due to the end forklift pockets (trade off?), which I really like. It came with a 12 volt pump which I changed out for a 110 volt pump. I have another video showing loading and offloading from the truck.
Changing attachments on the loader.
มุมมอง 1313 หลายเดือนก่อน
1) Trailer mover. 2) Laser grader. 3) Std. skid steer bucket.
Driveway and camera test
มุมมอง 203 หลายเดือนก่อน
Brush cleared from terraced land revealing a quasi roadway.
Lipa flail
มุมมอง 2344 หลายเดือนก่อน
Unboxing the Lipa TLB-90 flail mower and tackling some holly bushes.
Stumping with the SV40
มุมมอง 1334 หลายเดือนก่อน
Removing a hidden stump, and experimenting with new editing app.
First drive through the horseshoe.
มุมมอง 165 หลายเดือนก่อน
Took the Gator for a test drive around the drive. Need to do some widening and smoothing when the Laser Grader is repaired (may do a video on that).
A little chain sawing.
มุมมอง 145 หลายเดือนก่อน
Cutting up a tree I pushed over some weeks ago with the SV40 excavator.
New air
มุมมอง 16110 หลายเดือนก่อน
New single turbine air starter that replaced two vane starter motors.
Post snowstorm plowing 12.20.22 at the cabin.
มุมมอง 422ปีที่แล้ว
Post snowstorm plowing 12.20.22 at the cabin.
Hey there. You're back up and running on TH-cam again. 👌
Yeah. Didn't know there was a TH-cam jail
@@StuffBobbyDoes 😂🤣😂
Good. Thanks
You're welcome.
Phew!! I was UNDERwhelmed with excitement.
Maybe then you know why my cam was always facing North, or did you catch that?
It is NOT an AVR/ASR.
Vid was good quality but 4 the most part yr dealing with a hands on redneck do it yourself audience. I'm no spokes person but we could do without the techno. I wanna hear the machine. C how much it bogs out digging the stump n so on.
Soften it with water first
I did. Worked wonders.
@@StuffBobbyDoesi want to get a ripper for the backhoe but hard to find
@@FourthWayRanch Shouldn't be too difficult. Just check pin dimensions and spacing.
Looks good, not what I expected .
Okay Bob, think you've just convinced me to get this i stead of a skid steer. How high can that reach though while using the forklift atrachment?
This one goes up 9-1/2 feet.
Pretty smooth Rooks, looks like you are already developing some techniques. I bet that articulating is something to get used to, it looks like it turns on a dime.
Doesn't turn in it's own length but it doesn't tear up the ground like the skid steer did. And it's faster, more powerful, and uses all the skid steer attachments. There's still a learning curve. 😄
Need bigger machinery son
Hahahaha! You buying?
Looks like some slow going... :-(
It was on a slope and the shrubbery was tall, plus there was a stump buried in it.
Wound up doing the rest with the excavator.
Do trains be coming by on those railroad tracks behind you or not?????
Yes. There are three sets of tracks, and I wave at the engineers.
The first 3 minutes, you just seem to aimlessly walk around your garage.. With that small amount of snow, you could have used the ATV instead. The bulldozer was completely unnecessary
You're not very observant. Pay attention! Entered the shop, picked up the keys then went back to get the muffs, then the screwdriver to jump the solenoid. What good would the quad be to clear the road with no blade on it?
what brand of dozer
Yuchai. Made in China. Aka, Trak King, Northern Tool, and many other private brands.
Use the backhoe bit easier
Tried a Tak 180 excavator. Barely scratched it.
And entertaining it was. I so glad I’ve found videos of this machine actually working instead of promotional garbage. Do you still have this unit and do you still like it?
No, I do not I sold it about a year ago. Good little machine with the FEL and TPH.
Video too old,
What would you have me do with it then?
Just like a good deckhand, standing by with a car block
Oh shoot that wasn't Jake with the car block that must be an honorary deckhand LOL
Career relief oiler, lives in Allyn.
Ace charging me 3 k for this unit n 3k to install it, are they worth it?
They install very easy. I bought a second hand one and installed it myself. Just had to put a hole in the wall for the chimney.
Definitely not, in my opinion. Repair parts are very high compared to other comparable brands. I never was able to get the stove to work properly. Wound up selling it for $50. All of the edges are very sharp. www.woodmanspartsplus.com/xref/PelletMultifuel/RegencyPelletStove/GF40
Is it legal to road tow or not
I would say not. It's even a little squirrely behind the lawn tractor.
@@StuffBobbyDoes Thanks for reply i was not to sure thinks would require axel about 4ft wide to be safe merry xmas
@@gregburke4045 Yeah, the tires are nice too but the spacing is only about 28". And that chute is heavy so it's a little top heavy. Merry Christmas to you too.
First Run? Hardcore Test😁🤘
Yep. Still working on the mods.
@@StuffBobbyDoes I bought the same chipper in Germany for 1800€ you get the blow back from the wood you get away when you put the counter-cutting very close to the rotating knives Sorry for my eglish (translator)😁
@@Johnzottel I didn't get much blow back at all, just with large short pieces that I let free-fall into the chute.
Are the blades adjustable on this ?
@@danfriday1968 The blades are not adjustable but the anvil is. I reset them to the factory setting of .080. Huge difference.
si
My Yuchai's blade has been shiny but never that shiny.
Looks like you have a guard deer Bob
Hahaha. Sure changed that coyote's mind.
Is that a 60 or a 70 ??
Not sure what you mean. It's a 710.
@@StuffBobbyDoes he is asking whether it is an SD60 or SD70
@@JishyFishy4106 It's in a ship.
I have a 1990 pt400 pretty much the same crawler. will be building a fel for it. was wondering what the main beams on this fel are as far as thickness goes?
The box section is approximately 1/4" steel.
Planning on doing this to my 1950 f-5 wrecker.
Looks miserable.
Eight holes like that. It was brutal.
Your DJC looks great! Nice cart too ! Are those solid rubber tires? Thinking they should be with all that weight. I have the 12 DJC myself. Still need to put a service panel on it. Still has just three wires inside the small box with tape on the ends. Wondering if I can have it 220 and 120 volts. Any advice would be nice. Would love to see close up photos of the box/panel where you connect your power cords to. Or is it set up just to go directly to transfer switch? I have the transfer switch but it's not connected. Plan to not use the switch for now. just want to have a nice service panel with several outlets right there. Also want to convert to run on veggie oil. Send me an email: greencasa at gmail Thanks! Deano
That's a Harbor Freight farm cart with pneumatic tires. I sold the DJC and DJB a year ago. I just had a 50 amp 220 VAC outlet that I used to backfeed into my welder outlet that went to the house main breaker panel (I opened the mains when I backfed) and there the 220 bus was split.
Yep, the PTO works. Does it mow?
Oh yeah. Wish I got a video. 1/2 mile of 8' tall scotch broom alongside my road. That stuff was so gnarly I had to make two passes.
Magnificent, pristine, beautiful machine, just look at that flathead inline 6 cyl! Man, great work!
Dave Boothney. Thank you.
I determined it was a rocker bushing and push rod. After I cleaned out the oil supply orifice in #1 rocker shaft support the oil delivery improved greatly. Squeak gone and running quieter.
So what was the cause of your squeak? I'm chasing something similar
Rocker shaft.
The traps seem to work, but they are the only mouse traps I've ever seen where the mouse always seems to die lying on its back with the trap on top of him.
.
Nice. I have the same unit... 1992 model. Ran for 12 days straight (minus oil change) during Hurricane Sandy.
How is the maintenance on it?
Regular intervals.
Yep. Ten holes 4' deep, for a pole building.
Did he succeeded ??
Yep.
Now on eBay.
They do well for trimming and would probably do very well for your tasks. They surpass the productivity of a Cat D2.
That was a very easy fix for under a dollar.
you should post a video of the dozer trying to level out some dirt. im only asking because i may buy one to spread asphalt millings and fix up some dirt roads every once in a while
There is one. Called Speed Dozing.
I have a 6 kW two cylinder DJB in like condition if you're interested, although it needs some wiring completed. It also has a meter and outlet panel. It would be a fine compliment to your yard. :-)
It also has a 9" bucket.
How much are you asking for it?
This backhoe is now for sale.
I mainly use the IHI for drain cleaning and tracks on my folks farm here in NZ. The dozer would be mainly to help with tracks and deal with spreading the drain spoil. Over 10kms of drains to clean with the IHI and 50 odd years of build up of drain spoils, so it will be a busy little dozer if we get it!
Fair enough... so the rocking front end is called an "equalizer bar", jolly good, so it has that, that was my main concern that it wasn't a rigid track frame. Sorry my typo ICI... I meant IHI, an IHI 35GX to be precise. I looked up the TB135, seems to be pretty similar spec to the IHI35. I wasn't really meaning that a dozer is like a MF35, but more the scale and duty range. ie it has cat1 3point linkage (though I notice it is double acting), similar HP etc... Anyway thanks for the feedback.
I added the double acting hydraulics to the three point hitch, although it still has a float function.