วีดีโอ

Have you tried a torx bit, like a T25. Works great

Check out full solution on related video link.

Thats a cool pit brother. Congrats

28-32mm socket, swivel, extension and ratchet if I remember correctly at Valvoline

We found a better option! Check out our MCB clutch 1500 mile review! th-cam.com/video/ShOd_4UOMi8/w-d-xo.html

We found a better option! Check out the MCB clutch 1500 mile review! th-cam.com/video/ShOd_4UOMi8/w-d-xo.html

Go check out our 1500 mile review of the MCB clutch you will like what you see! th-cam.com/video/ShOd_4UOMi8/w-d-xo.html

Its hard in Australia to get any help even trying to buy a mother clutcher or mcb is very difficult i can see why shop say thay only do genuine is the company's are hard to work with we have no aftermarket support at all realy

New to this channel looks awesome

Are this for sale? And were can I get one

I just just a wobble extension and a socket works fine

. Close the top of your pit with say 8 by 2 boards before you drive over it. .

What size fitting did you use from the pump to the hose?

Low profile thirty two millimeter on a flexible Wretchett

Swivel socket

😂😂😂😂😂😂

Hope you flush that pump out real good

It's just how pee.

Yes it's pure urea

Never seen any one spray in front like that . I guess I may do ok as fertilizer but not weed be Brown .

It kills the bio underground. So no

The urea is synthetic not from urine, i wouldn't spray that on anything that might eat it

Now do it while holding a transmission on your shoulder

When I worked at a chemical plant we made a urea blend that was sold as fertilizer. Urea is the main ingredient of DEF. So depending on the other ingredients it would probably work.

We drilled an oak stump and poured it in all the holes and then built a compost pile over that. Hopefully the stump is gone by fall 2025

Just when good technology comes out, the world breeds a bigger idiot 🙄

Full video with results on the channel.

I would’ve sprayed in reverse or used wind direction to keep the corrosive urea off the pretty tractor, but if mucking out milkers doesn’t rot the paint it should be fine. A rinse wouldn’t hurt though

Def is high priced piss

Diesel Exhaust Fluid (DEF) is primarily composed of 32.5% urea and 67.5% deionized water; meaning the only chemicals present in DEF are urea and deionized water.

So did it work?

Yup there goes that sprayer drop off at freightliner come back in 3 weeks

You can buy a 5 gallon pure bucket of urea fertilizer online for $84 and you use 5 tsp to the gallon you can do the math but that's a lot of def you can do a lot of grass with that

All your hoses have rotten away since 😂

Purified cow urine

DEF is only 33% Urea with the balance being water.

Is there anything else that they might put in the DEF that might be harmful is my concern, but other than that my knowledge it’s just urea not a bad idea😂

How many yards of cement?

Def is liquid urea

Urea is cheaper per lb of nitrogen.

still don’t understand why shops charges less for maintain GM, Toyota etc etc than BM Audi etc etc those are easier.

I think it’s only water and urea

pokeweed, it's always pokeweed

Would never have thought about mounting a sprayer on a bucket

Def as a cheap nitrogen source came out a few years ago. Now find me something to get rid of Khaki weed and you'll have something.

I will not ask you for money or personal information on the footpeg giveaway. I will only contact the winner of the drawing shortly after the 10k view.

Did you ever thing to turn it around? You have the hitch laying on the ground , and you back on to it. When you’re rear tires are over the trailer axle it should be balanced and you left the hitch onto the ball , and by doing that your front wheels now come off the ground. Your wheels will be hanging in the air , it your hitch that will be holding up the frame. It’s a little more complicated, you will a piece of snowmobile, track on the rams so your trailer doesn’t run away because it’s not tied to anything This is how we did it years ago with the old dune buggies, the front wheels would just hang down

I've watched a few of your vids on clutches.... man your honesty and sincerity gat me to subscribe! Great channel man. And thank you for what you are doing!

The overhead storage rack, bender mount and service pit is pretty slick!

Yeah they make sockets just for this 😂