- 23
- 102 721
6Ray18
United States
เข้าร่วมเมื่อ 8 ธ.ค. 2007
TSP Stage 4 Truck Cam 223/226
Swapped an ls 5.3 into my c20 and dropped a tsp stage 4 truck cam. Specs are 223/226 .600/.600 with 111lsa.
Will be Dyno tuning it in a couple of weeks, it currently has a pcm4less tune by Keith. Runs good but I feel like a Dyno tune will fine tune it some more.
Will post Dyno numbers soon.
Has a cherry bomb extreme but I plan on trying something else, let me know what you guys think and thanks for watching.
Will be Dyno tuning it in a couple of weeks, it currently has a pcm4less tune by Keith. Runs good but I feel like a Dyno tune will fine tune it some more.
Will post Dyno numbers soon.
Has a cherry bomb extreme but I plan on trying something else, let me know what you guys think and thanks for watching.
มุมมอง: 7 497
วีดีโอ
AFE Intake Sound and Drive By 2016 Camaro V6
มุมมอง 2K8 ปีที่แล้ว
Decided to take some video of the intake sound and a driveby, dont know of any place to do it but I hope this is good wnough for you guys. Hopefully you enjoy this, pleas like and sub if you do!! THANKS!!
AFE Intake 0-60 ATTEMPT--Part 1-- 2016 camaro rs
มุมมอง 7618 ปีที่แล้ว
Attempting to do some 0-60 in the 2016 camaro rs. All that is done to the car is the AFE Intake and the npp fuse pull. I said in the video ill do an intake sound but thatll be in the part 2 as i wasnt FUCKIN RECORDING!! But i will try to record it tomorrow, HOPEFULLY!! Anyways thanks for watchin!! And dont forget to like and sub!!.
2016 Camaro V6 AFE Intake!!!!
มุมมอง 2.1K8 ปีที่แล้ว
Here's an installation of the AFE CAI for a 2016 Camaro V6!!! This was just released finally!! I finally got the chance to install this and throw together a video for you guys!! I will eventually throw out a 0-60 time and hopefully get the chance to go to the 1/4 mile either before or after the tune form Trifecta. Here's the link to the intake!! amzn.to/2eRTZFP Here's the link to the Sunex Ratc...
Playstion VR Reactions!!! Kitchen Demo
มุมมอง 1108 ปีที่แล้ว
Had my mom, dad, and brother play VR. IT WAS HILARIOUS!!! The Playstation VR is amazing and really fun to play. The reactions are great. Hoping to get some reactions from my grandparents this thanksgiving. Thanks for watching!! Go ahead and check out the Playstation VR on amazon by clicking the link below!!! www.amazon.com/gp/product/B01DE9DY8S/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=6ray18-20&c...
Removal of 2016 Iron 883 Gas Tank
มุมมอง 4.9K8 ปีที่แล้ว
Hey guys today I am going to be removing my gas tank for the 883 sportster, it should be the same if not similar to any other sportster. The reason for removing the tank is to repair some dents and repaint it to a flat black. Hope this video helps you guys remove your gas tank as well. For more pleas hit sub button and give this vid a thumbs up, thanks for watching and enjoy the vid!!
Monster Digital villian vs Go Pro 3 Quality Comparison
มุมมอง 11K8 ปีที่แล้ว
Today I will be comparing the Monster Digital Villain action cam with the Go Pro Hero 3. The Monster cam isn't a bad camera for the price, I had mine on my helmet with no casing, just the open enclosure one and the wind noise was harsh. The only complaint on that, the quality isn't as good as the go pro but it isn't all bad, still very nice. I will be modifying the monster case so the I will ge...
Thunder Torque Inserts Installation
มุมมอง 53K8 ปีที่แล้ว
Hey guys, just installing some Thunder Torque Inserts on my 2016 Harley 883 and from my butt dyno I felt a pretty good increase in torque and the sound also sounded more throaty. Overall the install was pretty easy and straightforward and I'm pretty happy with the product. I highly recommend these to anyone with some straight pipes that want to gain the lost torque from removing baffles. Thanks...
Monster Digital Villain Review and Opinion
มุมมอง 2.1K8 ปีที่แล้ว
Hey guys heres a review and opinion on the Monster Digital Villain action cam. The camera is a really good beginner cam and works really well, I have some footage in another video that I will add as soon as its published so you guys can check out the quality. I will soon do a comparison on the go pro hero 3 on my motorcycle so you guys can see the similarities. To see upcoming videos please sub...
1st Ride with My Monster Villain Camera ride along HARLEY
มุมมอง 5458 ปีที่แล้ว
Doing a quick test ride on my 2016 Harley 883 with my new Villain Camera, had it set on dash cam mode instead of video mode. I guess this is a quality test for the monster villain camera in dashcam mode, will upload in video mode this coming weekend or sometime this week. Hope you enjoy and will start motovlogging soon. Please like and sub if you wanna see more thanks again.
How to install VO2 intake Harley 883
มุมมอง 4.9K8 ปีที่แล้ว
hey guys today i will be showing you how to install the VO2 naked air intake on my 2016 harley 883 sportster. Just bought this vo2 naked air intake from revzilla made by Vance and Hines. Today I install this amazing intake and for a nice price too. I did notice a huge change in the bike, will need a tune to make run at its best but still runs great and sounds amazing. Thanks for watching. Pease...
2016 Harley Iron 883 Straight pipes
มุมมอง 6K8 ปีที่แล้ว
Hey guys, just thought id show you how the 2016 iron 883 sounds without baffles on some straight pipes. All i did was remove the stock slip on and boought some straight piping from oreillys, 1 7/8, and clamped them on the bike for a true Harley sound. Hope you guys like it and if you have any questions please feel free to ask. Comment, like and sub would be greatly appreciated thanks for watching.
1990 Silverado tonneu cover
มุมมอง 808 ปีที่แล้ว
Jist bought a tonneu cover off of amazon for a real good price. Quality cover that looks good.
1984 c4 corvette muff eliminator sound
มุมมอง 4109 ปีที่แล้ว
My 1984 corvette with the muffler exhaust eliminators and bone stock engine, for now.
1990 Chevy 350 sbc with cherry bomb extreme exhaust
มุมมอง 6K10 ปีที่แล้ว
1990 Chevy 350 sbc with cherry bomb extreme exhaust
System of A Down Violent pornography Guitar Cover
มุมมอง 8911 ปีที่แล้ว
System of A Down Violent pornography Guitar Cover
What's the purpose if you don't add a clip of how it sounds?
😅 why the fuck you put them on the outside?😊
Cause any problems?
I'll make my own for 5.00
And your neighbours love you for it.
Did you need a stall converter for this cam??
Yes, I went with a 3000 stall
We're you able to Dyno the truck yet? Very curious to see what it out down!
yor camera it was all over the place tryed reading the instructions no chance
should of had the nuts on the inside out of site
STILL SOUNDS LIKE SHIT
Sounds great man 👍🏻 Do you have a INSTAGRAM where I can follow your build ?
you'll just need a, uhhh.....tripod...lol....I'm with Painted D. Just make em' urself
Nice bike brother
What size pipe and thunder torque do you have?
Can't remember, don't have the bike anymore, but I think the pipe was 1 1/2 in and the thunder torque was about the size of a quarter.
Thanks
Swap that old cat for a new one
nice job bro.. did you feel difference in performance???
When u remove catalitic need change some for carb or not.have same power ? Thanks
youll lose low end power but no carb changes until you play with intake
Bruh.... it has electronic fuel injection.... lolol
Easier to just make your own. I've made several pair throughout the years and they work great!
What size washer do you use on 1 3/4 pipe ?
Wot size washer on a 2in pipes im gona make some. To exspensive in the uk
Did you leave in the O2 sensors or did you remove them and plug the holes?
+MrSandevils i left them in, no need to remove them
Any chance you could link to the part you purchased. I can't seem to find them.
Elusive Man i actually just went to an oreilys and bought some pipe from them and painted them with some high temp paint that they also sell there
hey man have you used torque cones before but not these lollipops what exactly do you think this did for year engine and you're exhaust
Scott Liegel your* your*
Not trying to be that much of a dick, but when you said you were gonna install it and then get back to us I got confused. Although you can technically make a "how to" video without showing the actual installation but it's not going to be a very good "how to" video at all.
lol thats the lap timer
+Chris Carnero XD well now I know. That's funny
Theres a tow hook under the back trunk floor mat too
6Ray18 u have to turn on 0-60 function. Thats why its not in ur speedometer. If u dont know how tp turn on I can help with that
have one main thing I use it for a dash Cam for my simi truck... want to use it for fishing don't know that it will work unless I have it on dash Cam mode
sweet bike bro, check out my bike youll like it you hv a Sub here hope you SUBSCRIBE to mate cheers
thanks for leaving the actual sound with no freakn music !
Adding music on homevideos is so 2010.
Would like to hear it
yo can we HEAR the intake bro. Im interested in this thing and find a sound clip "for fucking shit"
Thanks for the unboxing and installation. I just wish you could have said "fuck" and "shit" a few more times Haha
What exhaust are you using?
dry509 some straight pipes i got from O'Reilly
its possible to put a bigger tank here?
Victor Tellez it is possible to put a bigger tank, as long as you order it specifically for the sportster
thanks Ray!
You can install a 4.5 gallon gas tank from an XL883L, XL1200L, XL1200C, XL1200CA or XL1200CB.
does the monster use go pro mounts?
i believe it can use the mounts but not the case itself as the buttons are in different spots
I just did this mod today and noticed some breaking up around 2300 rpms do you know if this will hurt the bike
Im not sure if it will hurt the bike, i didnt notice anything with the bike after i did the pipes until i did the air cleaner then i almost couldnt ride it till i got it tuned. I did notice popping though.
The sound is awful bad in helmet cam, is it the Monster Digital?
+joistein yes its the monster digital, I prefer the go pro
Sounds really good! My dad has a 95 with the LT1. Feel free to check out my channel if interested, I have many videos up of my 350Z as well as other car stuff!
Did the pipes come precut? Or u cut them? Also did u had to buy some clamps?
yup, they came this length from oreilys
+6Ray18 also i used the same clamps
+6Ray18 thanks. How much did it cost? And discolor?
+Timothy Maikeo dont remeber the cost of the pipes but it was less than $20 bucks and the paint was about 6 bucks, i used some header paint
+6Ray18 awesome.
You're gonna dirty up your engine if you don't cover up those 2 holes on the backing plate with those breather hoses , those breather hoses go through the backing plate , did you not read the instruction ?
yea i read, must have missed it, thanks
Right on. I'm in that AZ heat too. My tti's got shipped today
Nice man, they work pretty damn good, totally worth it
Good. I'm on a 1200. And with shortshots. I'm mainly trying to get rid of the decel popping.
+Media Thief nice, these should help with that, then a good tune would really help all together
6Ray18 yeah, I'm running a pcv and autotune.
i hear installing these in the V&h short shots is a little tricky. Ive got a 48 and have done every performance bolt on expect these. Looking for more torque, was it difficult?
and how did it change performance?
I did not need a tune to be able to ride, and there was no power gain until i tuned it with the fuelpak
6Ray18 you def need a fucking tune lmaoo, is it blown up
Did you need to tune after?
cool
Looks good! Can you put the stock cover back on if you want to?
never thought about it so I actually just tried it and it fits
your the man!! thank you much! I just received mine from revzilla but am afraid to open because both they and v&h say the stock cover won't fit it.
+Jared Spence no prob, i ended up keeping it on my bike since i didnt want to drop 80 bucks for the skullcap, plus the stock cover looks nice too.
Good video. Brother keep it up making awesome videos!!! 😃👍🏻 +6ray18
sounds great man keep up the good work
applause! question-- have you attempted doing tracks at music projects on Bandhub! I some times play acoustic guitar -- We shall perform together at the website! It'll be insane!
I could`ve got in that video ram
I'm your brother
Sup Ram
Well done, nicely played!:)