วีดีโอ

Thank you so much. I was almost about to go to a mechanic 😅

Why even upload this shit video where you don't show or explain anything?

Thanks! Noticed my handbrake was very slack and not holding the car on hills anymore, then I realised that one of the back discs was getting extremely hot compared to the others. Took the wheel off and had the same issue, sprayed it and jiggled it and now it's so much better.

Thank you. Saved me a more expensive fix😂

I would recommend getting a decent map torch and get the nuts glowing and then use the nut extractor... Used a pair of really good parrot nosed pliers my self didn't snap any bolts/studs this way.

Omg that camera work was so bad I couldn't see a bloody thing

Need to do throttle body relearn after doing anything touching the throttle body at all, even just moving the butterfly valve. Search Ford Throttle Body Relearn

Thank you !

Does anyone know the size of part number of the 2 screws that hold the upper grill to the front panel ? The guy in the video is held with cable ties

I'd rather just spend the 10 quid to get the right tool for the shock mount holder "KS Tools 150.9435" 😅

Hi should the butterfly valve completely close when u it detached. There is a 2mm gap on mine but closes more if I push it then it Springs back

Cool. Ill try that, seems easy

Chewing gum sounds baaaad so I didn't watch

On my estate the reversing lights are in the tailgate, not as you said on video, in with the cluster you took off from the body .

Not very explained well to quick

Thanks pal this was annoying the life out of me but since I seen this video it's now sorted much appreciated 👍

This was super useful, thank you. My friend and I are removing a powershift DCT gearbox from a Mondeo 4 Ecoboost and this has been a great guide

you didn't show anything smart, you practically disconnected only the plugs, I can't see where you need to unscrew to remove the bumper, next time try harder

Actually I don't think what you call the MAF sensor is a MAF sensor, it looks like an air temperature sensor so it can run rich when it's cold to warm the engine faster, like an old choke used to be. And if the TPS is the big bulky type maybe the maf sensor is combined with the tps

Can i bin this and fit a straight pipe instead

Best solution is to get brand new calippers, handbrake mechanism is worn and rusted inside, water comes in and blocks it. wd40 will last only for some time, you will need to repeat in some interval

Many thanks. It worked for me and it's great to have a window returning by itself again

Nvm kept my foot on the brake whilst accelerating got her into gear and went for a 20min drive then cranked heating and lights. After it cycled the gears a few times it remembered how to hold idle

On the reset car will only run if I’m keeping the revs on will not idle itself just stalls. Like yours did in the video. What was your exact reset procedure please while everything’s on and your holding revs turn off ? And how long hold please

Thanks mate 👍

Legend. Worked first time doing the 3 times pull up on switch and hold for 1s.

Is that a euro 4 mondeo

How do you know if they are broken mate

Red texting terrible, impossible to read

Dpf master diagnostic mobile mechanic is the “O’Rileys Autos” channel , do check out you won’t regret 👍

Amazing worked first time thanks!

Well this shows ya fuck all 🤷‍♂️ dont have to shake the camera while you record ykno

Too close too fast to recognise individual areas, lost interest and moved on.

Music's bloody annoying

To echo the other comments thanks for this.

So is the DPF 100% empty now ? Thank you

Does that machine work with mk5

This is a 1.8 tdci engine? Thanks!

I use a lot of scrap wood or metal to make things just to see if I can . One of my hobbys. GOD bless..

How did you reset the car after unplugging the sensor

so if it were impossible to rotate the switch could you not just switch the wires connected to the top or bottom of the swtich?

Do the dpf learned values have to be reset after cleaning?

Thank you. I want to add that you have to do this individually for each window to reset it. Just hold the close button until you hear a little click, then release and repeat 3 times

Did it make any noticeable difference to ride quality? My MK4 seems a bit of bumpy ride on roads with lots of repairs. Looked at everything and nothing seems loose or leaking but is original shocks on a 12 year old car with 150k. Is shocks the thing to do or rear bushes, new lower front arms , drop links ? Or it just old everywhere? Would be interested to know if one part you changed made the most difference?

I absolutely love you!! Top man!! Fixed!!

mate. how do you take the small side bulbs out?? do i just yank it out with needle nose plyers??

thanks mate

You don’t need to remove bumper or wheel arch liners this has made the job twice as long.

Thank You ☺️

Let me know your thoughts please cheers G