- 35
- 188 376
Circuit Schools
India
เข้าร่วมเมื่อ 28 ก.ค. 2020
Loads of Electronic Knowledge
Arduino Candle Blowing Project: Light and Extinguish LEDs with Fire and Sound
💡 Arduino Candle Blowing Project: Light and Extinguish LEDs with Fire and Sound! 🕯️
Welcome to Circuitschools! In this exciting project, we’re combining technology and creativity to simulate a candle that you can light with fire and blow out with sound!
🔧 Project Overview:
Using an Arduino, a flame sensor, and a sound sensor, we’ve created a system where:
A real flame lights up WS2812b LED candles.
A blowing sound turns off the LEDs, mimicking the effect of extinguishing a candle.
🎥 What You'll Learn in This Video:
How to set up and wire the Arduino with WS2812b LEDs, flame, and sound sensors.
Writing code to detect fire and sound for interactive control.
Creating a realistic candle effect using LED animations.
📂 Resources:
Full Arduino code and wiring diagrams are available at: www.circuitschools.com/candle-blowing-project-on-and-off-leds-using-fire-and-sound/
Get step-by-step guidance to recreate this project easily!
👍 If you loved this project, LIKE, COMMENT, and SUBSCRIBE for more amazing Arduino and electronics tutorials. Don’t forget to hit the bell icon to stay updated!
#ArduinoProject #WS2812b #FlameSensor #SoundSensor #ElectronicsTutorial #DIYArduino #Circuitschools
Welcome to Circuitschools! In this exciting project, we’re combining technology and creativity to simulate a candle that you can light with fire and blow out with sound!
🔧 Project Overview:
Using an Arduino, a flame sensor, and a sound sensor, we’ve created a system where:
A real flame lights up WS2812b LED candles.
A blowing sound turns off the LEDs, mimicking the effect of extinguishing a candle.
🎥 What You'll Learn in This Video:
How to set up and wire the Arduino with WS2812b LEDs, flame, and sound sensors.
Writing code to detect fire and sound for interactive control.
Creating a realistic candle effect using LED animations.
📂 Resources:
Full Arduino code and wiring diagrams are available at: www.circuitschools.com/candle-blowing-project-on-and-off-leds-using-fire-and-sound/
Get step-by-step guidance to recreate this project easily!
👍 If you loved this project, LIKE, COMMENT, and SUBSCRIBE for more amazing Arduino and electronics tutorials. Don’t forget to hit the bell icon to stay updated!
#ArduinoProject #WS2812b #FlameSensor #SoundSensor #ElectronicsTutorial #DIYArduino #Circuitschools
มุมมอง: 141
วีดีโอ
Learn Installing Arduino IDE in easy steps
มุมมอง 975 หลายเดือนก่อน
Learn Installing Arduino IDE in easy steps
WLED Usermods Custom compile Animated Staircase
มุมมอง 2.2K6 หลายเดือนก่อน
WLED Usermods Custom compile Animated Staircase
Automatic street light system using photocell sensor
มุมมอง 6607 หลายเดือนก่อน
Automatic street light system using photocell sensor
What is Arduino, how it works, and what you can do with Arduino
มุมมอง 1.9Kปีที่แล้ว
What is Arduino, how it works, and what you can do with Arduino
DJI Mavic Air battery recovery using Arduino Cheap and Easy Method
มุมมอง 44Kปีที่แล้ว
DJI Mavic Air battery recovery using Arduino Cheap and Easy Method
Interfacing 16X2 LCD Module with Raspberry pi Pico
มุมมอง 2.4K2 ปีที่แล้ว
Interfacing 16X2 LCD Module with Raspberry pi Pico
IOT based Health monitoring system on ESP32 Webserver
มุมมอง 10K2 ปีที่แล้ว
IOT based Health monitoring system on ESP32 Webserver
Interfacing BMP280 with Node MCU ESP8266 with error solutions CircuitSchools
มุมมอง 3.6K4 ปีที่แล้ว
Interfacing BMP280 with Node MCU ESP8266 with error solutions CircuitSchools
Interfacing BMP 280 with ESP32 with error solutions - CircuitSchools
มุมมอง 10K4 ปีที่แล้ว
Interfacing BMP 280 with ESP32 with error solutions - CircuitSchools
Interfacing 16x2 LCD module with ESP 32- Quick Tutorial.
มุมมอง 29K4 ปีที่แล้ว
Interfacing 16x2 LCD module with ESP 32- Quick Tutorial.
Circuitschools channel intro Stop motion -- Electronic components
มุมมอง 9324 ปีที่แล้ว
Circuitschools channel intro Stop motion Electronic components
Cheap Electronic components, Arduino Sensors online Unboxing in India
มุมมอง 2514 ปีที่แล้ว
Cheap Electronic components, Arduino Sensors online Unboxing in India
Wled Usemode html and json and http custom
can you please ask it clearly
@CircuitSchools wled digital 7segmat clock html Usemode modify json
@@ajmolhoque102 are you asking us to create a wled based 7 segment digital clock and provide the files?
I was stuck as Unseal/FAS forever. I charged each cell to 4.0v using the TP4056 with a 5v 550mA charger - still couldn't get past Unseal/FAS. Similar to other people XLoader wouldnt use baud rate 115200 with the Nano clone I was using, but 57600 would work. After everything failed I decided to try it with an Arduino UNO clone instead (Using the UNO's A4, A5 and GND pins). XLoader would now upload on 115200 and finally it fixed my battery. I'm not sure what could've been the problem with my Nano but if anyone else is in a similar situation it might be worth trying an UNO instead. Hope this helps.
Used an Arduino Uno clone with this method. Connected the pins A5 and A6 + GND of the Arduino board to the battery (not the SDA and SCL labeled pins of the board - that didn't work). Selected CR03, the right com port (the com port that discovered the board in arduino IDE) , baud rate 115200 and uploaded. Opened the serial monitor. Worked like a charm. 80€ saved. Thanks.
Do it without arduino
This is fake, where is the transmitter?
HC-SR04 ultrasonic sensor is used in it and it's behind the display, you can see the white cable connected at bottom
Could you answer the followers please?
Будьте добры, пожалуйста помедленнее, я записаю
Hi, where can I find the complete project?
le code
That's hillarious!
Hello! Is it possible to share your code for this one?
What is the name of the transmitter and receiver
Hello bro please soon reply video for dji air ,mini ,mavic battery upgrade capacity edit in arduino nano please soon
@@Nmrathnayaka sry bro at present I don't have the code to update them. You can do it with cp2112 and battery killer software
Please update to work with Ronin M or MX batteries which also use BQ30Z55 but have 4 cells. 🙏
@@SebastianHagemeister our code is just to reset the PF flag, may be the same code works. if the board is same, check the SCL and SDA pins according to ronin and connect.
sonar not radar
Can you please provide some details of set up instructions using a link or new videos? Did you use any coding? Finding documentation for this module is a nightmare and the internet does not have any instructions for how to use this module. I would appreciate any help that you might be able to provide.
Right?
No link for anything other than you're Website.
W1209 mostly used for diy incubators this has hot and colling mode.
Code pls??
This is incubator temperature control module.
Yeah w1209
nice, link to buy?
Search W1209
Apparently YT doesnot want me to answer. Keep being deleted
@@Ed19601 ok no problem will search online
Very cool
Can i send my batteries to you to reset and if so what is cost?
@@davidhanlin351 from which country you are?
@@CircuitSchools canada
Thats not our country and you cannot ship though, if you buy the components like Arduino and connectors from description I can help you online
@@CircuitSchools ok thank you I will look into it further then
@@CircuitSchools ok thank you i have ordered the components. If i have trouble interpreting what to do i will try and get hold of you.
Bro full video
I need the code. Trying to revive my DJI Mavic Air battery that was unused for a while.
I want to use 4 buttons in esp8266. By default, I can only use 2 buttons. I heard that I can do that by using build flags but I tried compiling but it's not working the firmware upload successfully but still it's only showing 2 buttons. Do you have any solutions?
Anti alien radar
Nice project 🎉🎉
Tutorial?
It's a sonar
You can only do 2d mapping with this but not 3d
Kodları görelim
will this work on a spark battery with Arduino Pro Micro ATmega32U4. Need your help
Yes It works for spark battery, as the tutorial is simple and easy make a try
Great project!
It doesn't work for me.When I open xLoader i have COM3 only. Anyone have ideas to solve the problem? Greetings
Check in device manager, is com3 for Arduino?
Muito interessante, poderia ser feito com o telhado móvel ao invés do varal, mas muito criativo a invenção e extremamente necessário
the video is very good. follow the tutorial. I was able to compile from previous platformio from Arduino with lots of errors. Thank You. best
I'm stuck. I'm using an arduino Uno rev4, ive tried both 57600 and 115200, it just gets stuck on uploading. No idea what to do now. Please help.
Estou com este mesmo problema
How to buy this chip?
Required components: Arduino NANO: amzn.to/3jVNZON Connecting wires: amzn.to/3H2BV4e
Someone is so kind to clarify whether or not it works with Mavic 2, the same one that works for Mavic air Or do we need another specific file for Mavic 2?. They have asked a lot and no one answers. Thank you
as we dont have mavic 2 battery, its not possible for us to test it. As this setup is soo cheap you can make a try.
@@CircuitSchools I crossed my fingers and I did it with Arduino uno and it went well, so yes, it is compatible with the batteries of the Mavic 2. The process is done exactly the same, making the correct connection in the battery. Of course!
I'm following the mentioned steps but in Arduino after choosing serial monitor and selecting 115200 baud it stuck at Unseal/FAS ... So, no Done unsealing and writing Done. Do you have any idea why this is the case?
batteries power is low to power up the BMS, Look the ending part of the video to solve this.
I'm using the Arduino UNO R3 which has dedicated SCL and SDA pins for I2C control - should I use those or the dual-purpose pins A4,A5 for analog input and SCL,SDA for I2C control?
you can use it on any of those. Both works same
Id like to unlock and get rid of my pf error code on phantom 4 pro battery due to sitting so long. is it the same process? and can i get the code. liked and subscribed. thanks
you can download the code from the website. and as we dont have phantom 4 pro battery we havent tested. May be this works or not you can make a try as its cheap to try.
great tutorial. Thanks to you I brought 2 batteries back to life. Thank you very much.
You're welcome!
Hello quick question waht is the white board that the tp 4056 sits on?
Breadboard amzn.to/3CcBR16
How can I do it with Arduino Uno?
does this method work also with the battery of Mavic pro?
goofy ah intro
luv u bro ez unlock my mavic 1 bat
thanks a lot sir Easy way to unlocke Air Drone Battery sir Phantom 4 battery BQ30z55 ko unlock krny k liy bhi Aisa hi koi trik bta dain ya HEX file