วีดีโอ

In the syringe…see that orange tip? That metal needle is where the glue is coming from.

www.raceformrc.com/collections/tire-gluing-jig/products/1-10-lazer-jig-on-road-touring-and-m-chassis

Our products have went thru many round of testing and tons of Proof of concept. Since the launch of this product, there are only good feedbacks from actual users that had purchased and used the tracer. Do feel free to contact us if you have faced any issues with this tracer and we will provide our best possible assistance.

Hi, it is not compatible with nitro 200mm body and chassis as the post are usually vertical for this class. Do stay Tune to our channel and social media for more updates.

Hi, during the video shoot, we have only a couple of wheels but many different models of tyres. Swapping out the tyres made more sense in terms of a budget and thus we didnt glue it down, but rather showing that this jig is able to peel the lip open for application of glue. This Jig is a matured product for more than 5 years and had served countless happy users across the world.

@@raceformrc28 seems reasonable.

Even with Clear body, it is a challenge for most ppl to get it correctly and precisely and repeatedly. With this system, it eliminates the guesswork. Not forgetting that all prepainted or professionally custom painted body shells does not comes with holes reamed. You can now confidently order custom painted bodies from anywhere in the world and have the holes reamed yourself when you receive the bodies.

Hi Edward, it is available at www.raceformrc.com/collections/on-road/products/1-10-on-road-pro-bodypost-lazer-tracer-horizontal-rear-body-post-system

Yes, the wing has to be mounted prior to locating the rear holes. The wing height is by rule has to be lower than the body for Touring Car, so we usually would set it at 114mm since we would always run the body height at the lowest possible 115mm.

@@raceformrc28 some people mount their bodies more forward or back depending on what body they are using or what surface they run on. Is there a way to mount your body 3mm more forward than neutral with this?

@@Kobiwan73 with our system, you can mount at any forward or rearward position. This is the basic requirement during our product development.

@@raceformrc28 Can you explain how? I had the same question in my head. Your front body mounting system is fixed. In order to move it forward or backwards, one must remove it from the posts and push it around by hand, eliminating all the benefits.

@@turtletrading4207 take a look at video timeline @ 5.30. At this point, only the rear holes are reamed. At this point, you decide what is the forward position you desired by sliding the body forward or backwards, and fix the rear pin back to the post. Then follow thru the rest of the video will teach you how to correctly locate the front 2 holes. It is a brand new method of getting the 4 holes correctly and we are sure this method totally eliminates all the guesswork, especially when you are switching from different bodies or chassis. Pretty sure with the old school method, once you have a new model of body, any one will have difficulty locating the holes all over again.

Hi Reaper, the rear post was aligned without the need for any involvement of the front post and since it is a Horizontal rear post, meaning it is almost parallel to the ground. Once rear is mounted, that point acts as a rotational anchor point for the front, and that would result in the same rotational placement. Moreover, there are also some freeplay from the body post pin holes, so precise fit will be guaranteed. Rest assure that this tracer tool is carefully designed with many factors considered and most important take is user friendly to use and precision and repeatable results..

It does not come with any blades. It is designed to be used with normal hobbyknife blades.

Yeah it’s bull shit

You can try this . That’s good to use www.racepf.com/accessories/crosshair-body-mounting-kit.asp

I seen this in 8th scale on ebay.

For staggers, as they are very thin to begin with, you will need extra discs to stack them higher for it reach the tire bead. You can purchase them separately from www.raceformrc.com.