วีดีโอ

хорошая шутка)

Could have just printed it upside down, and used far less supports...

I use this every time I need support. One of the reasons I like my bamboo so much! .. PLA with PETG as a support layer.. best idea ever ;-)

First time I tired this, I didn't purge enough PETG before going back to PLA and the print crumbled apart like drywall

How do you calibrate esteps (rotation distance) on the 5M Pro?

An easy way to show off the warping capabilities of cheap filament 🤣 ... Also bad example, the shown example could have been printed perfectly fine without supports upside down.

PORQUE NAO IMPRIMIU DE CABEÇA PRA BAIXO PRA ELIMINAR OS SUPORTES ?

What settings are these?

I mean by plastic Tube is stuck more the Titanic

now i know howw to unload, thx

Why does it have tumuch stuff

Where buy?

Please explain the steps for the non automatic calibration

Why is my touch screen stuck on the language screen?

Mine is stuck on 40s mark and it didn’t change since do I need to do something

What could this time mean if we do not know the print settings, layer thickness, infill percentage, etc.?

thanks i just bought a pro the only problem i had was i forgot my wifi password lol

OVERPRICED!!!

For for the leveling Test I ssume the filament must be removed ?

My filament tube is stuck

I have this one and I love the. Titanium.

cool

Thank you so much for sharing the knowledge! The procedure is almost the same with the original Adventurer 4 except that there is no cable to disconnect at the back of the print head.

can you please share your printing profile profile?

what material and which slicer are you using?

How to calibrate Z offset ?

No comments...?

X_y_z calibrate?

So it just pops out after clicking that button or what? I dont get it

Thank you for making this video. It was very helpful. I received my FlashForge %M Pro today and your video helped setting it up a breeze.

There are so many great royalty free music pieces out there. Why did you pick these?

153 pounds for a crappy RC with a camra on it🤣

Thanks for your information. I have Adventure 4 lite, Adventure 3,and 3 Lite. The glass bed of the 4 lite is needed on some of my prints and the flex plates work better for some My Adventure 3 stopped working. I think am going with the 5Pro from your information

How upgrade Adventurer 4 -> Adventurer 4 Pro? What need buy?

not helpful. leveling works great. Not printing squarre.

And ... as a benefit, the 5m Pro is $200 less expensive on amazon! That is a no brainer .... thanks for the video, very good, love the data collected starting from the packing box sizes! Now I want a Bambu printer reading @brenwyattm0rij909 comment! What do you do Brent with so many 3d printers?

Can we make free energy from this?

How much were you paid for the review because at no point did you say you got the printers for free or just to review then return. So my point is why should we trust your review?

You do have preheat on this printer. Just tap bed or extruded icon on right hand side and set temp. I have 5M pro and 3 Bambu X1C’s. Although I have a soft spot for flashforge because their Dreamer was my first printer in 2016, Bambu is just a tool. No tinkering, just works. I will keep my 5M pro but have had a couple of problems, but I still need to tinker or I will get board of 3D printing.

Thank you so much for this

I lost mine

What if you don’t have a leveling card

I had some FlasForge, including 2 Creator X. I thought I'd buy x2 Guider 3Plus in the professional range. Well, what a disappointment (1 of the 2 machines broke down after 300h and I don't devellope more on the simplicity of a machine)! I really understood that FlashForge was stuck in time when I bought a Bambulab X1C. The hardware is very robust but FlashForge is 5 years behind in electronics and Slicer. What horrible FlashPrint software (don't use it if you have an ARM Mac). they were the 1st to use dual nozzles, so dual colors, with Creator X. 10 years later, they still don't have AMS, whereas BambuLab can run 16 colors. FlashForge needs to invest in engineering, not just marketing as they're doing, and not very well at that! So, goodbye FlashForge

Damn. I just bought the a4pro..... Lol oh well. I'm coming from the old FF dual printer

Thank you for this comparison. Could you mind sharing 3d printed custom spool holder link? Thank you!

"The most unreliable printers on the planet are undoubtedly Flashforge, plagued with incredible malfunctions."

Mine has jammed so badly that it has pushed the nozzle out completely so preheating is impossible as its now suspended by cooled filament.

"PromoSM"

Could be used for mixing cocktails uk?😂

Thank you! This saved me! Didn't realize there was a piece of unmelted filament just sitting there stuck and clogging up the extruder!