วีดีโอ

Got it THANK YOU!

Very cool to know.👍

How can I message you? I have a question

Great info. So, I can upgrade my 2021 onan 4k generator solenoid w/ the ford solenoid should work? The nI am selling this thing and going inverter.

I got a 9500 Westinghouse. Battery light comes on but nothing happens when I push electric start button or when pull starting. Solenoid issue also? Or something else?

How do we know which solenoid is compatible with our genset?

I love your fix. My generator has 2 wires that don't unscrew but are hard wired into the solenoid. I'm assuming they are for remote start. Do you think your fix will still work?

I truly appreciate this video. Thanks so much. I test my generators every month or so, I’ve got two electric start Westinghouse’s connected to trickle chargers and run on propane. Gene 1 perfect. Gene 2 no click no nothing. This is my issue for sure. I jumped the terminals and it cranked the engine. 9.99 plus shipping for the oem part through Westinghouse. I would have taken everything apart and replaced the whole starter. Thanks again.

I have a Champion dual fuel 9000 watt and when I push the start toggle, I can hear the starter make it's noise, but the engine isn't turning over. Is that the solenoid?

Ok I have a portable generator train 6500 .it sat in the shed for a year I didn’t drain the gas before I stored it .pulled it out to start and it wouldn’t start so my first thought was it needed a new carburetor .along with that as I was trying to start it I was holding in the starter button and everything just kind of quit working so I replaced the carburetor put a new solenoid on and new spark plug still won’t start .the push button still isn’t working either so I tried starting with screwdriver it turns over but still won’t start I’m confused to what is wrong with it and I also checked for spark and it has spark it’s not a strong spark but there is spark I drained gas and put new in as well .what are your thoughts?

what is that trap called?

Will this work for a ridgid 6800 generator?

Thank You So Much ! Very informative with an excellent presentation. Even a dummy wouldn't have a question.

same shit happened to me, the solenoid lasted exactly 6 starts

It looks like a ballon

You know they are going to ask, is it 4x4?

Great trap. Do you have plans with dimensions? I'd like to make several and I'm better at wood working than bending and fastening wire. thank you Steve (66 yrs) Manitoba. Any tips or resource suggestions for processing pigeons for meat?

THIS IS HOW I FIXED MINE, IN THE CASE OF.... "I CAN'T START MY GENERATOR" It's has been two years since last time it was running, so I started by checking oil level full at gen dipstick (it won't start if low oil because of sensors) then I checked gasoline more than 1\4 tank in the RV (also safety sensors), sparkplug checked for good spark, also checked the manual reset circuit braker ( to be ON) at front motorhome engine compartment for 12v current to the generator to be able to start it, also cleaned the carburetor and even installed new one but same situation, then checked wires and found some has been chewed like gum by rats at the back of starting switch generator panel so I replaced them, at this time the generator started but stay running only by keep pushing the switch on all the time, so then finally I knew it was internal electrical problem from the engine itself, so I took the generator out from my RV to work in my garage, (I did this by myself with some tools and old Mayan tricks ) lol, it's really heavy for one person. I disassemble the unit at my garage and started by removing the cover, then the cooling fan or flywheel unit (it's 2 items in one) until finally I was at the gen rotor and brushes assembly area and this is what I found: one more wire chewed by filthy rats plus the stinky rat nest in the middle of the generator motor coil, I fixed the wire and sanded the commutator copper contacts where the brushes are sitting becouse they were real duty with old urine from the rats, and of course I got rid off the stinky nest, lol!!! Then I assembled everything back together and... bingo it's runing like a champion!!! For this project materials involved was about $60.00 including an aftermarket new carburetor and an harmonic balancer/steering wheel puller (available at any auto parts for $25.00) to pull the aluminum fan out and (flywheel). Just picture this: (Any gasoline engine run smooth if gasoline and DC current aren't interrupted) so following this important principle you'll always find the problem to be fixed. Also if you have a onan microlite 4000 like mine, don't run it for more than a minute without the cover because you'll cook the engine real fast, also keep the eye on the aluminium fan and your fingers after cranking it in case you missing one or two members...just kidding, lol!!! After testing the gen with the help of a gasoline container, a piece of hose and 12v battery, I did put the air cooling assembly back and the rest of components including the cover, then it was ready to be installed at my RV. Once the gen was installed back at my motorhome I started it to be tested for 120v electricity but not before flipping the AC circuit switch (on) at the gen starting control panel (sometimes hiding under or around the panel) to be able to transfer power to my RV GFCI main outlet and electric panel as well, my motorhome it's equipped with GFCI so I reset it and tested for green led light indicating power is ready at my main breakers panel, so I turned my main breaker (on) along the others ones but no power was present at my breaker main switch (faulty main braker) so I flipped it many times, sometimes you can make it work again, mine did work, lol!!! I'm happy because everything works now including the refrigerator for cold drinks and AC for this crazy summer, lol! Later I'll buy me a new main braker, for now this is a resurrected generator story that needed to be shared. If this can help eaven one person to save time and $$$ it'll make me more happy, thanks for reading!

Thanks brotha your video helped me a lot, I get confused with electrical stuff so I was like is the switch bad, is the relay bad? Nope just the cheap solenoid like you said.

I have a 1966 Maytag wringer washer. still regularly maintain it. Did you ever fix the wringer? It takes time to do the research , however there are parts out there. You may want to set up one or two galvanized tubs for rinse. Helpful if you have a lot of laundry.

Thank you for sharing, we're east of you in az. What is your annual rainfall? We get 5 inches annual, does this method work in those areas? I'm trying the broadcast method with upcoming monsoons. Looking forward to seeing what you have done.

😅I even enjoy listening to you🤣while learning

Cool

@The Self Sufficient, Offgrid, Hobby Farm Thank you for the video. Which other car solenoid can be used instead of 1991 Ford f150 solenoid? What is the amperage of the solenoid? Can 18 AH generator battery powered the solenoid?

Please try ancient grains. the ancient wheat.

Supposed to ring before you rinse

Good job

wow. wish I knew this back in high school. so simple.

Hi again. I tried the new solenoid and it did not work. I did cross the old solenoid and it did start. tried the new one and found the only black and white wire was tied together with another white wire in a harness that went to the old solenoid Any suggestions would be grately app. I have a Generac GP7500e if that helps. Thanks

Great video, thanks 👍

Thanks for info. my Generac generator starter just clicks. i will cross those 2 leads and see what happens. as you say it should turn over. I will be buying a new solenoid and trying it. if i run into issues I will contact you. And again THANK YOU

Hey, to fix the "head wringer unit" try pulling the whole thing it up and out of the rest of the washer body(it's heavy). Then turn it upside down and if I remember correctly, twist the "tension reset lever". Flip it back over then twist the lever again and it should be tight. Then put it back into where you pulled it out. You won't need the straps anymore to keep it tight. What happens is when you put something too thick through the wringer rollers, it will pop, but sometimes it really pops, that's when you have to take it all the way out then flip it upside down to fix it..I hope that fixes it..Oh and to answer your question, as a boy I was playing with my Mom's wringer when she was at the store and I got my fingers from both hands caught in the rollers. Luckily a neighbor girl hear me screaming and she came over and popped the tension release bar and pulled my hands out. Luckily none of my fingers were broken..One last thing, adjust the rubber wheel on your water pump, so its closer to the pump, because when the pump is working right it will empty the tub in I believe 2-3 minutes. Maybe your impeller inside the pump is broken or there's threads wrapped around it, you could check that to.

will this work for magpie birds ? Thankyou.

Start with organic non GMO ❤️

This is great! I'm trying to catch the Eurasian Collard Doves that visit my backyard daily. Thanks for sharing.

Do you have footage of it working?

yo no ablo ingles y no te entendi ni aca

Please make a video showing how to make a bird trap

Approx how much replenishing sulfuric acid will that size battery hold?

I think your chicken lacks of calcium

Looks like my left nut

Don, Awesome vid - where do you acquire the acid and how much? How much was it to discard the acid/base at the landfill? What container did you put it in to transport it there? (i.e. how does the landfill accept stuff like this?) How long did you let the waste acid gas out for before transferring to a container? Thank for the quality vid. This should help many

Where can you buy the acid?

aw why are there no people watching this i thought it was cool ;-;

Cool!

Awesome best trap by far