วีดีโอ

Not all heroes wear capes! 🙌🏾🙌🏾🙌🏾🙌🏾

You are a hero...This is the exact issue I had...

You saved me a lot of time today, thank you!

Thank you for such a great detailed video. I followed their tutorial for the same issue with Samsung and it fixed my two burners that weren't detecting pan

Thanks for your video! Our Samsung stove is now nine years old. About eight months ago the righthand side burners stopped working. Several weeks ago the lefthand side burners stopped working, so we decided to take the plunge according to your video. Success! Very disappointed in Samsung, however several appliance sales people have told me that stoves are no longer built to last, unlike in my parents time.

Dude thank you!

My two convention fans went out within the first 5 years and now the left two burners. Them you got this video, got the issue fixed. But shame on me for buying a Samsung. Won't make that mistake again!

Thanks mahn

Thanks a lot for this. Soldering was my problem. 3 burners now are back to life :)

thanks dude. used this to solve my problem tonight. saved me a whack of cash.

Exellent demo - fast and to the point. Love it!

Nice video. I think I get the same issue after 9 years, but I'm still uppset for Samsung for this low quality soldering.... Bad marketing!

That's a nice touch getting your son involved. As a kid I would've loved projects like these!

Thanks for this video!!! I went 3 years without the left burners, then 3 months ago the right ones quit working. In less than an hour I have a full functioning stove top again.

The screws for the red and black wires are completely stuck. We tried everything and no success. Any ideas what we can do because we are damaging the screws right now?

I replaced both fans in oven 2 month later the left side of the induction cooktop stopped working thanks for the video . By the way what type of solder works best.? Samsung should stick to phones.

Thank you so much! Seems to have worked on ours! (And you’re right, those relay posts really don’t like to take solder, so I will admit that I’m not proud of my solder bubble, but works, works…)

Thank you so much for your video. My samsung, 10 years old, failed one burner at a time over the last 6 months. Thanks to your video I also found 2 bad solder joints on the centre circuit board. After 4 hours work it is now back in operation. Great job on the instructional video.

Amazing instructional video! Well planned and thorough. Our Samsung induction stove top had the same problem and this video made it possible to save the stove.

WOW! Thank you so much for this incredibly detailed video. We had the same problem. I followed your video step-by-step and now I have a functioning stove again. I had never even soldered a circuit board before. You saved me from having to buy an entirely new stove.

An impressively clear video; and depressing how many people have had to make use of it for exactly the same soldering problem. This is the second problem with the Samsung range that I've had to fix on my own (nobody services Samsung in our area). Not impressed with their reliability!

Thanks for the detailed, and clear instructions. I've had to use your video twice now. First the left side went out, then about a year later the right went out. It was the same solder joint both times (but on opposite sides of the board). You saved me a bunch of money.

Thank you so much for your detailed and helpful video. This model stove is discontinued and we were able to fixed the 2 burners using your recommendation of resoldering the motherboard joints. We are very grateful to you!

Thank you for your detailed and helpful video! This model stove is discontinued and we could not find another stove on the market with the same features. We were able to fixed the 2 burners due to resoldering the motherboard connections as you did. You save us a big repair bill and we are very grateful.

4 years after being uploaded it still helps people. Thank you I was about going crazy.

Thanks. I just did this even though my hob wasn't completely broken. I got 10% more power on the left and 100% more power on the right. My big burner also had the wires a bit burned so I gave them a light clean. If I open it up again I'll change the 2 relays (GK-A-1A-12D) and will fully clean the wires or replace with silicone wires, they were only 14awg.

Thank you!!

Excellent video! My LED hot surface display is broken but I appreciated seeing how you removed the top and accessed the display. Keep up the good work!

It worked!! Before I saw this video I took my oven apart. I could not see anything wrong. Watched the video, took it apart again. I Looked at the board could not see any issues. I used my phone to zoom in on it and found the little tiny culprit. I resoldered the connection, and put it all back together. And bingo it worked!!! Thank you very much for your excellent video. I would’ve had to pay another $3000 stove. I will never buy a Samsung again, 2 main boards a convection fan and now this,never ever again.

Thanks a lot for the video , I had repair my left two inductive burners with the help of your video . Samsung model NE599NIP. Less garbage for the landfield. Again THANKS A LOT....

Thank you for posting this!!!! Do you think this would be the same issue if the two burners on the right side are not recognizing that there is cookware on it? Samsung was no help with this.

I had the same problem and your video and fixing was spot on. Same exact pin with the left burners not noticing the pan. Thank you for putting this together.

So for the second time in two years you sir have saved my bacon! Two years ago I used your video tutorial to fix the left hand side burners that were not working, just today thanks to your video I was able to retake my cook top apart and fix the dry solder joint that was now stopping my right hand side from working. Thanks!

Thanks so much for making this video. I am having the same issue with my range. I believe it's the same model as well. I will attempt this repair.

I just finished the same process and found cold solder joints in the same location on the same board. It also looks like there was an attempted repair evidently by the people who made the board after realizing that the board had failed connections. Pretty obviously a manufacturer defect but of course Samsung isn’t going to admit fault. I repaired the solder connections and the range burners work perfect now. It’s actually a pretty simple repair once you know the issue. The Samsung appliance repair technicians told my brother that the range couldn’t be repaired and the best place for the range was the local landfill. They had already replaced the main PCB board at the back of the range which of course had absolutely nothing to do with non functioning burners, at a cost of $600. These guys are a bunch of clowns and have absolutely no clue. Anyway thanks you for the heads up it saved this range from death by landfill.

Great video, unfortunately, many of the screws on my unit were very soft and stripped easily making access to the circuit board very difficult. I did manage to get to it, and solder what looked like a. burned out connection, but either my skills are weak or it was something else...time to look for a replacement.

This problem board is DE92-03543A ASSY PCB SUB. The failure solder point component is GK-A-1A-12D. The problem is so called interactions soldering.

This is literally the best video on TH-cam.

Add me to the list. Two left burners out. Same board. Two bad joints on the two relays. Back in business. Thanks!

Thank you so much, Tools Against Entropy - this video made it possible for me to accomplish this! Our Samsung had the same left side go out as yours...and it now WORKS! I really appreciate the details. Hope you and your son are doing well.

Hi ,can you say what power going to this board ? For what pin ?

Old video but It helped me at a crucial moment. 🤣 Thank you

Thank you for this! Fixed my range today with your instructions. Same issue!

Thank you for posting this video! My stove is similar, and I had lost all functions of the stove (lights, sounds, burners) all at once. The fix for me was replacing that yellow circuit panel (DA92-00486A), I was able to test with a multi meter, and the soldered in fuse on that panel was blown, in addition to it having a burnt spot on the panel. While I was there I checked the other soldered connections and fuses like you show in the video. Thanks again, and cheers :)

WoW! Super video, saved me! I had the exact same problem and your explaination was so clear that i couldn't miss the job. Many thanks.

Got one….it’s pos…put it in the dumpster

Very nice! Thank you. I looked at another video purporting to show how to do this, but it was impossible to see what was going on due to not enough light, the man's fingers blocking the view, and the poor camera angle. Two thumbs up for this one!

Killer video

Thank you! Fixed my left two burners this way. But now the big right burner isn't working. Time to disassemble again...

Thanks for showing this teardown. On my brand new Samsung induction range one of those two "Nidec" DC blower fans very noisy, making a clicking sound with each revolution.