![DEADLEAD AIR DLA](/img/default-banner.jpg)
- 83
- 109 295
DEADLEAD AIR DLA
เข้าร่วมเมื่อ 15 ส.ค. 2020
Airgun reviews. airgun accessory reviews.. Airgun ammunition reviews... Airgun suppressor reviews... everything airgun...4500psi tank and Compressor reviews
วีดีโอ
Karma Red Panda Match stick challenge + Card cut in half Answering 912Airguns callout
มุมมอง 537หลายเดือนก่อน
air gun used Karma Airguns Red Panda. 300 you can pick up one at donnyfl.com tell them deadleadair Sent you. pellet used AEA 50gr Diablo This video was in response to a friendly call out from a good friend Scotty at 912Airguns If you're looking for a Air gun in Georgia 912airguns@gmail.com
New Dead Lead Air 35gr .218 Eviscerator Ballistics media test...
มุมมอง 155หลายเดือนก่อน
New Dead Lead Air 35gr .218 Eviscerator Ballistics media test...
shooting7targets Rimfire K.Y.L rack Assembly.
มุมมอง 55หลายเดือนก่อน
K.Y.L targets and stand shooting7targets.com
RMAC 2024 Range footage.
มุมมอง 678หลายเดือนก่อน
RMAC 2024 RANGE Footage. #karma airguns #donnyfl #shooting #slugs #usa
FXM3 50YD Tik Tak shoot. Dead Lead Air 38gr Dominator Slugs
มุมมอง 2742 หลายเดือนก่อน
FXM3 50YD Tik Tak shoot. Dead Lead Air 38gr Dominator Slugs
FX DYNAMIC 35CAL 95GR DEADLEAD SLUGS AT 350YD
มุมมอง 2202 หลายเดือนก่อน
FX DYNAMIC 35CAL 95GR DEADLEAD SLUGS AT 350YD
Karma Air guns Red Panda .30cal Unboxing and setup EP1 of 3
มุมมอง 1.2K3 หลายเดือนก่อน
Karma Air guns Red Panda .30cal Unboxing and setup EP1 of 3
357cal FX Dynamic kit for RMAC
มุมมอง 2583 หลายเดือนก่อน
357cal FX Dynamic kit for RMAC slugs and equipment available donnyfl.com/products/dead-lead-70-grain-30-cal-eviscerator-slugs-100-ct slugs and equipment available at At 912AIRGUNS IN BAXLEY, GA PHONE 912-278-4196 912airguns@gmail.com
Dead Lead Air RMAC 357cal Dynamic Set up/kit
มุมมอง 973 หลายเดือนก่อน
Dead Lead Air RMAC 357cal Dynamic Set up/kit
Dead Lead Air New 22cal .218 43gr Dominator Slugs... floss at 50 yard's.
มุมมอง 2965 หลายเดือนก่อน
Dead Lead Air New 22cal .218 43gr Dominator Slugs floss at 50 yd. Slugs deadleadair.com S-press Corbins.com pro monopod sabertacticalinc.com/ #airgun #challenge #donnyfl #shooting #fx #fxairguns #panthera #slugs #usa #airarms #FXM3
Pressing worldclass slugs with Corbin S-press
มุมมอง 2.4K5 หลายเดือนก่อน
Pressing worldclass slugs with Corbin S-press Press www.corbins.com/shop/corbin-s-press-1#attr= slugs deadleadair.com #corbens.com #airgun #challenge #donnyfl #shooting #gunday
FX Dynamic 35cal 700mm Set up update. Full kit
มุมมอง 4355 หลายเดือนก่อน
FX Dynamic 35cal 700mm Set up update. Full kit slugs deadleadair.com #airarms #airgun #challenge #donnyfl #fx #shooting #fxairguns #panthera #slugs #usa
The secret to world-class Slugs deadleadair.com
มุมมอง 1996 หลายเดือนก่อน
The secret to world-class Slugs deadleadair.com
Saber Tactical PRO Universal Bench monopods first looks
มุมมอง 2396 หลายเดือนก่อน
Saber Tactical PRO Universal Bench monopods first looks
first test run of Fx True Ballistics Chronograph
มุมมอง 2067 หลายเดือนก่อน
first test run of Fx True Ballistics Chronograph
Fx True Ballistics Chronograph Unboxing
มุมมอง 797 หลายเดือนก่อน
Fx True Ballistics Chronograph Unboxing
NEW!!! .35Cal FX PANTHERA DYNAMIC AND KING.... Products
มุมมอง 6978 หลายเดือนก่อน
NEW!!! .35Cal FX PANTHERA DYNAMIC AND KING.... Products
testing new slug Designs And waits in The FX Dynamic 35cal 700mm
มุมมอง 9638 หลายเดือนก่อน
testing new slug Designs And waits in The FX Dynamic 35cal 700mm
FX Dynamic 35cal 700mm shooting 99gr Dominator Slug
มุมมอง 6759 หลายเดือนก่อน
FX Dynamic 35cal 700mm shooting 99gr Dominator Slug
Swedging slugs start to finish with Corbin S press.
มุมมอง 1.2K9 หลายเดือนก่อน
Swedging slugs start to finish with Corbin S press.
My FX Dynamic 35cal 700mm kit/ Set up
มุมมอง 2.3K10 หลายเดือนก่อน
My FX Dynamic 35cal 700mm kit/ Set up
FX Dynamic .357 50 yard group's with DonnyFL Yokozuna...and FX 35Cal 68gr HYBRID SLUGS
มุมมอง 2K10 หลายเดือนก่อน
FX Dynamic .357 50 yard group's with DonnyFL Yokozuna...and FX 35Cal 68gr HYBRID SLUGS
first shots FX Dynamic .357/9mm and DonnyFL Yokozuna Suppressor sound test
มุมมอง 3.2K10 หลายเดือนก่อน
first shots FX Dynamic .357/9mm and DonnyFL Yokozuna Suppressor sound test
New FX Dynamic. 357/9mm Unboxing First, look first impression. Install of DonnyFL Yokozuna
มุมมอง 1.8K10 หลายเดือนก่อน
New FX Dynamic. 357/9mm Unboxing First, look first impression. Install of DonnyFL Yokozuna
Upcoming deadled air fun. Deadleadair.com new product. Announcement
มุมมอง 12710 หลายเดือนก่อน
Upcoming deadled air fun. Deadleadair.com new product. Announcement
Corbin Manufacturing CM-4a Adjustable core mold. Simply the best.
มุมมอง 715ปีที่แล้ว
Corbin Manufacturing CM-4a Adjustable core mold. Simply the best.
FX Panthera Bag Rider best upgrade for under $50
มุมมอง 745ปีที่แล้ว
FX Panthera Bag Rider best upgrade for under $50
are all of the slugs you shoot made for you?
@rodrigobarboza5566 by me yes dead lead air slugs are featured on this channel unless otherwise specified
Donde puedo conseguir la prensa en 5.5
Mine is in the way as I see this video
I have the same gun as you and I’m extremely worried that it won’t secure ie the bottle not sitting correctly in it!
@@andydowden8117 Mine does not sit all the way down in the universal mount. Either I think that they are making different adapters for different size tanks
Como puedo conseguir esa maquina
50 yds + is a good starting point for rifles in this category.
With the Huma regulator you put in your Leshyi 2 does it give you more power then the Repr regulator that it came with.
@JohnVentarino-ey5ln The huma regulator is the raptor regulator.... And yes, it does have more power than the stock.... I no longer own that gun. I traded it for an M3 800mm
@@deadleaddla8985 can you tell me why I thought you really liked your LESHYI 2
That thing is badass !! How many shots with a 150 bar reg can you actually get out of the 300 cc bottle ?
@@Light_357 13 rounds
So looks like your using the Yokozuma and liking it, how’s it compare to the 1350 with 2 extra baffles in each?
@Addicted2Fun On this current gun in this video I am still using the thirteen fifty We have some new upcoming tests.That pit them against each other And two more airgun, suppressors, coming to market ..
The yokozuma is to Heavy four the M3 800mm 22cal So all of the tests will be dawn on the gauntlet 2 .30cal
Whats your favorite platform for hunting now? You have several reviews so far. Thank you.
@addisongarrett242 my M3 22.. But that's only because I currently have a 30cal slug gun But I would hunt with any one of them, including the red panda Obviously, the red panda is a gun that would do well in scenarios where you're hunting from, a bench like a large gopher Colony the M3 800mm. 22 Is great for running around It is still the shortest gun I have.What's the longest Barrel The .357 Dynamic I would use from a blind for coyotes. Dear and other Small to medium game And I have a new M3 800mm 357cal Coming soon ... And when the new karma s l s comes out I will be buying one To replace my Leshy 2
@@deadleaddla8985 you prefer panthera or edgun leshiy more?
@addisongarrett242 the fx panthera or fx dynamic 700mm or 600mm
@@deadleaddla8985 i have .22 panthera compact atm and thought about trading for leshiy 2
Great Shootin Jason. Cheers from the desert SW USA!
Great....try to do whith a 22
Awesome shooting. The Red Panda is a laser beam
Way cool buddy! Anxious to see how they work on the Ghost. My reg is only at 163 now and stock hammer spring. So, my next day of testing 33, & 36gn H&N will be bumping the reg up until I see valve lock, then change to one of my stiffer springs.
Gr8t video Bro 👍🏼🤠✌🏻
I want to see Daystar in that mix.
🤠 Hi. i just saw your Edgun Leshy video from a year ago and signed up for you channel. Looking at you other videos I saw you were also experienced with the FX line. I am an older guy waiting for a property sale to move near a wilderness in another country, so I am preparing for the PCP purchase (probably more than one.) Having a firearms background I have done my homework on various PCP brands and learned about PCP projectiles ballistics: 1. In your opinion, what could be said about comparing the Edgun Leshy-2 and the FX Dynamic AR 600.? I thought about buying the FX 600mm version with an extra 500 barrel to shorten it afterwards, because the 600 mm comes with a larger plenum. 2. If you had any experience with the Western airguns Sidewinder Compact-S, and the Western Sidewinder ? Because is a new PCP semi-auto technology, the Compact-S is small and on a similar price range as the Edgun line. Any help will be much appreciated.👍
@travelcompass591 So I do love the Edgun But it is no longer in my collection Because accuracy is the most important thing to me ... And they're just not there on the Accuracy front ... The FX Dynamic Is a great system ... I am a slug designer and specifically designed my slugs for the dynamic.... But I honestly think the gun to beat is the new Red Panda from Karma airguns..... I play seventeenth overall at RMAC In my first year doing Competition .... My average hundred yard score is usually around two thirty...
Received mine 2 weeks ago in 30 cal pellet. is a very nice airgun. Mine has a few issues... 1 - no manual ...2350.00 $ and no Freaking manual. Utah airguns emailed me a manual....In Chinese !🙄 2- Lower knob for adjusting length of pull is too short ! Won't tighten down on the rod !Utah airguns hasn't gotten back to me on that issue yet ! 3- the 2nd magazine failed the first time I tried to load it. Spring came undone....I fixed it. So far it is working like the other magazine If it wasn't for PJ on wisconsin Airgunners I wouldn't know how to use and tune it. Thanks PJ ! YOU ARE A LIFESAVER! So far it has performed as expected in the accuracy department. May use it in a competition this weekend.
@seancrook6675 Mine did not come with the Manual some small leaks, but par for the course ..... Shot pretty darn good at armac, didn't make finals ... Was in a heat with some extremely good shooters Guys, with half the score of me, made finals kind of the bummer of only taking 5 people per heat instead of the best shooters... I have a little bit of creep I fire four per shots before in.This seems to settle things out My standard deviation is two point two I will talk with donnie about getting you a handbook in english
@@deadleaddla8985 I would GREATLY appreciate that !
o my
Having a hard time deciding between the FX crown and the FX impact. The FX Crown feels better in my hand but on the other hand the impact has 90 FPE and 25 caliber and the crown has 60 FPE. I could get the 30 caliber Crown but my shot count would be lower. The other downside is I prefer the 500 mm Barrel on the crown because of 600 is quite long and not very portable. Whats your opinion?
@surreallife777 My personal recommendation would be to get an m3 30cal With an orion heavy hitter mag You have the most customizable gun on the market. And even with an eight hundred millimeter tension barrel, it's still shorter than most airguns Then you're playing with the big boy my 70gr Eviscerator at 950fps gives you 140fpe And the barrels and everything else are super affordable to make it. Whatever caliber you want, it truly is the AR of the air gun world
@@deadleaddla8985 Ok, thank you. I have a Kervan Airboss K1 25 cal from Turkey. If you put the gun side-by-side with the crown, they almost look identical. The advantage of the crown is that it’s tunable. This gun is tunable, but you need to take the stock apart from the gun and adjust it that way, but that’s OK. I don’t mind just setting it up for one power level with one slug and pellet. It has 1100 FPS max and 60 FPE. So I guess I’ll keep this and get the impact M3.
@deadleaddla8985 What's your opinion? How do you decide between a 25 caliber and a 30 caliber? I like accuracy of course but I also like penetrating power/fpe at longer distances shooting test subjects like Pinewood. I've spent quite a lot of time trying to understand this but I'm not sure my conclusion is correct This is the area where Airguns become very complicated in terms of accuracy and energy and distance. Here goes. A 30 caliber slug will have more energy/penetrating power when it hits a target using exactly the same gun at a certain distance. On the other hand because of the added weight, the energy of the 30 caliber slug might lose more energy than a 25 cal slug when it hits a target at say at over 150 yards compared to a 25 caliber at 150 yards, but at 100 yards, the 30 caliber slug will have better accuracy and much higher penetrating power/FPE?
@surreallife777 My fx m3 800mm is still shorter then my fx panthera 500mm And I am a thirty caliber guy A 22 can reach the lighter side of 25 caliber. And thirty can reach way beyond the heavier side of twenty five caliber, so between a twenty two and a thirty.There is no sense in having a twenty five ...Unless you are going to a new boat tail design... I have a new 25 caliber. Slug coming out, but that won't be until next year.When everything is finalized in twenty two and thirty caliber... And I would stay away from The Crown. I would go with a dynamic or a king More options for more power And if you're wanting to shoot slugs, I would recommend going with a six hundred or longer Regardless of what you get
@deadleaddla8985 Thanks. You're correct skip the crown and look into the other guns and possibly go for the Mark 3.
First lol.
Good shooting bro, it was good to meet you. I will try to get that video out soon. I gathered waayyy too much content. Lol
I like Leshiy 2 too much, but unfortunately China won't let me play. I really want to have one.
yay1
Very impressive Jason. Keep up the good work. Cheers from the desert SW USA!
We are a manufacturer of bullet presses. You can watch our videos to learn about our products.
Good video. Challenged accepted.
We are a manufacturer of bullet presses. You can watch our videos to learn about our products.
I've been waiting to see someone hunt with this guy, ty!
Not bad. Would like to see where they were landing, and if you can actually print some groups at that distance. It’s nice to know what the hunting limits are to our air rifles, and we don’t want to hunt with them if we can’t take humane shots. I love seeing guys testing the boundaries. 🍻 cheers to that
wak and stak em
I think I want this for my huben GK1… I heard the ryu doesn’t quiet it down enough.
You do. . I need GK 1 so bad for lol
@@deadleaddla8985 I got mine from krazkool airguns shipped to me in like 3 days. I’ve barely shot anything else since I got it lol.
Great shootin there Jason! Looking forward to seeing how well you do at RMAC. Cheers from the desert SW USA!
Fragile is said, (fradge - isle) not French 😂 in Spanish its pronounced (Fra-heel)
Lol
Happy bday, Christy!!!! 😘😘😘😘
rofl i shoot that with a 350 euro gun,snowpeak m25 in .25 cAL .WITH HUMA REG...fx IS OVER RATED?TO CHEAP GUNS
What caliber ?
22cal .218 43gr
thanks for the kind words brother
I already bought my Corbin press kit still waiting for Corbin to ship. Great video Jason. Best wishes for RMAC. As the Airgun Geeks say "have fun and don't come in last". Cheers from the desert SW USA!
Christy!!!
J adore 😉 Est ce que vous vendez la pièces 3D
Where did you get that part. Not on their website
Apparently they don't make it anymore. If there isn't a link in my description.
Watching this video for the third time (I think) and realized I did not leave a comment. OOPS! Great shootin Jason. Cheers from the desert SW USA!
What caliber?
22. .218 43gr Dominator 950fps 86.16fpe bc.147
The temperature fluctuations affect your load cell in your digital scale. That is what is giving you fluctuations in your grain weight. I switched back to a beam scale for this reason.
What's the tripod used??? Thanks...
Hallo bos, i wan upgrade my leashy 2
@@deadleaddla8985 Do you mind saying why you got rid of it? Maintenance? Reliability?
I only go a grain over and it’s perfect weight every time. With the hollow 2 step process one, what you call an eviscerated, I do about a grain and a half to two grains over dependent on the caliber. For example, my 177 I only do a grain over the 22 and 25 I do a grain and a half. It works perfect for 177 and 22. With the 25 it varies a 10th up or down just like you are showing here maybe give that a try with your 22 And only one pressing stroke.
good job buddy. i cant wait to these bad boys out
Great video Jason! really liked the close up shots of the swaging process. I really want to get me one of these presses soon. Cheers from the desert SW USA!
Very nice 👌 👍 😮 And where are the slugs available?
deadleadair.com
Hi, Great video! Solved so many issues I had! Please can you list the part numbers as I would need to order a couple of items! Thank you so much