วีดีโอ

@@stanlyqbrick1621 yes, oysters are very healthy for you! Thanks for the comment!!!

@@igotbig1333 thanks for the comment.

Sorry to hear that. Did you follow all the preparation steps? What brand did you use?

@@RiverReboot same brand ,two coats. 10 ft jon,no trailer . Fishing strip pits ,pulling it out of water to load in the truck the front and back scratched right off.

@@_SLAVEONE_ not sure what went wrong it just didn’t stick as it should have….

@@_SLAVEONE_ mine will scratch but just the surface it doesn’t remove the product.

Not really on a small boat with a small engine. My goal is protecting the bottom not speed. On a larger vessel with bigger motor you might lose 1-2 MPH according to what people say about bottom paint.

5-7 years do them both at the same time. You can buy OEM parts or Barr makes great ones that everyone seem to like. That’s what I used. DO NOT USE THE GLM BRAND!! marinepartssource.com/products-by-brand/barr-marine/exhaust-manifolds?gad_source=1&gclid=EAIaIQobChMIlqvklOi0hgMVb0xHAR2Pkg43EAAYASAAEgKYEfD_BwE

Glad it worked for you!

You will see once you have two Coats on it will be sealed I don’t think you will want to do additional coats. You can certainly put extra coats on if you like. I think I had some paint left after 2 coats but not sure it was enough for another addition coat? I would never do more than 3 personally….

Yes, Crazy those things are a pain to deal with.....

Dock-IT Marine was very fair on their pricing. I talked to contractors for over a year before deciding to go with them. So glad that I waited as they do quality work!

We are still looking for you and Mike to come down….

😊I know y’all gotta come down

Come on…..

Thank you! We love it! Y’all should come down & enjoy some crabs 🦀

That looks wonderful, enjoy your beautiful deck and view!!

Can’t wait for you to come down!

When you coming down?

Thanks Barry you should bring Michelle down on a coffee run!

Thanks Lee yes, I can now get to the water without tumbling…..

lol….

Yes, I’m in the middle of a major house project then I’m going start over with new seed oysters.

Funny you should ask that. I’m working on one now. I’ve just been busy working and life comes at you fast sometimes.

If you’re asking can you paint over the bed liner to change the color? I have never done that. My search says you can but you need make sure it’s clean for the paint to stick. Can I Paint Herculiner Original Roll-On? Herculiner can be painted though, it is best to use a polyurethane based paint to coat the surface with. Colored polyurethanes may be a little harder to find, but because they are like material and have the same pliability, you will get the longest lasting coverage with it.

We launched our own gourmet coffee! I haven’t made any videos and I have not reseeded my oysters. I hope to do both in the next 2 months.

Yes, you need property but it’s really not a lot of equipment once you have the bags and cages. You do need to keep it clean….

Thanks for the comment and supporting the channel!

As long as it says it will stick to plastic gotta make sure bottom is clean to stick

804-725-8556 was the last number I had for her. Thanks for the comment and supporting my channel!

3 in one oil works fine! You can go for more expensive reel oils if you like but not really needed……

Small boats with small engines not going to make any difference in speed really. On larger vessels can maybe reduce speed 1 mp with bottom paints but only due to overall weight or bottom growth attached.

Thanks for the reply.

I have the follow up video out called oyster farm update. Other than that I’ve been eating them and restocking as necessary.

@@RiverReboot thank you

The main goal is to protect the bottom of the boat. The deeper the ramp the better and getting the carpet wet first should help. Thanks for the comment

Not on small boats with small engines. You won’t be able to tell the different. On larger vessels it could maybe slow it down 1-2 mph.

I don’t see why not make sure to read the can first! Also, anything you put it on must be prepped according to instructions…..

Are you looking for a carb kit or you want to buy the motor?

No not noticeable. Small boats small engines your not going very fast to begin with. On bigger boats you might lose 1-2 mph but it’s all about the protection from rocks, oyster shells and sand.

Not sure maybe the finish is more appealing? This is basic works great and not expensive and holds up well. Sometimes simple gets overlooked…Example I painted an entire 5.7 new boat engine with BBQ paint oil base Rust-Oleum high heat. it’s made to resist heat and does a wonderful job! I learned that off of another boating website saved me a ton of $$$$. I have a video of it here on my channel.

@@RiverReboot Huh. That's pretty awesome. I was thinking it was probably for the appeal.

On smaller boats with small outboards you won’t be able to tell the difference with painted bottom. 1-2 MPH on larger vessels sometimes. I’m 100% in salt environment and oyster shells everywhere so protection is the most important thing to me.

@@RiverReboot ok, cool. I have a 1032 jon boat. I'm 115 lbs soaking wet. Sounds like it. Lol Thank you.

​@@RiverReboot Would it effect it if I'm just using a simple little trolling motor? Sorry, just wanna be sure.

@@straightwhitemale5753 A trolling motor I mean you won’t be able to tell because your not planing out but if speed is your main concern then you might want to get an outboard it’s the only way to go faster period as you know. Any weight added to the boat as you mentioned will slow down any boat. A boat pulled up on sand and rocks will damage the hill until you must repair it. I have a 79 23 SeaCraft and the previous owner always just pulled up in the sandbar to swim hang out. Well, it took the finish off and started showing fiberglass. Long story short I had to repair it. $$

@@RiverReboot I just bought a small old 1032. Maybe 30 years old. This won't be going on sand. It'll be rocks and concrete. But speed is not my concern. Just being able to hold up against wind and a current. (I'll be on a river.)

Not sure about that? I think it would but not sure it wouldn’t pop off? Read the can and if it says plastics then your good. You must prep and clean properly or it doesn’t do well….

Order online pick up in store for a discount! shop.advanceautoparts.com/p/herculiner-black-1-gallon-truck-bed-liner-kit-hcl1b8/11242739-p?product_channel=local&store=2129&adtype=pla_with_promotion&product_channel=local&store_code=2129&gbraid=0AAAAAD05GhWlbhW_YqnzKvpI_B_SjN0J6&gbraid=0AAAAAD05GhWlbhW_YqnzKvpI_B_SjN0J6&gclid=EAIaIQobChMI7t_nzKDV_gIVUyGzAB2sCQZpEAQYASABEgI4d_D_BwE&gclsrc=aw.ds