วีดีโอ

Ok i was going to say. It has to be after the throttle body. The good thing about Miata’s is they have tons of places to hook a vacuum line onto. Btw if that’s an NB it looked like you were lining the first mark with the 10* mark. But what you would want is the second one. It will look like both marks line up to the two marks on the cover. If you do it by the first mark it’s going to be way advanced.

Cinda cinda da

🎉

I have this wheel, but it is 9 pin gameport, how to connect with PC?

Pozdrav iz Srbije za nasu bracu Kashube 🇷🇸🏴‍☠️

Is this steering wheel big? Can it be converted into a momo steering wheel?

Mogłabym prosić tekst do piosenki?

Belno!

This one needs more bass

Yeah boiiii

Hello! This is quite an old video so I doubt I'll find help but I did this mod and my force feedback does not return to the center properly anymore unless I remove the tape on the motor (thus making the mod pointless.) Any ideas on how I could fix this

Quiet

Is it compatible with ps3?

So this should also work with a Precision Pro non force feedback wheel?

Dude could you tell me how u modified it, to it be able to do a full 360 with the whell, cause mine just goes 180 degrees

Is Gameport Version? or usb Version?

do you have a clutch with it?

Result: the new center should be marked. Imagine driving all the time with the steering wheel off-center!!

can you please tell me the pinout of the RJ11 cable. the one that plugs into the foot peddles and to the driving wheel. I lost mine and need to make a new one. crossover or straight through? thanks

Gonna give this a try soon and incorporate a slip ring to prevent wires from breaking.

Hi, Im having problems with my sidewinder, the force button is blinking and it does not have force feedback. Just looking for help

Muzyka w szkole to zuo

Radek, onde anda você? Precisamos da sua ajuda!

What you're trying to do here is called "reducing sensitivity" of the wheel rotation. My question is why do all this work when sensitivity is part of the driver setup?

*The ability to swap wheels is very nice✡>**share4.photo/TGTRacingWheel?ㅣ ** but as I change between a circle and F1 wheel often I wish the connecting collar was metal instead of plastic. As you must insert a screw into the collar in order to secure a wheel to it, my collar's screwhole has become just a little loose; causing concern. Functionally it still works and I haven't felt that one of my wheels is going to fall off or wiggle around yet, I'm concerned for the future.*

Theres a fix for the wheel not being centered. Rotate the mirror for the backside of the steering wheel sensor. I used a small plastic piece i had laying about, removed it from its position and just glued it to the plastic piece at 45 degrees to the left. Might take a few tries to finetune the center position. If you want 900 degrees then cover another hole on the black sensor disc (totally 3 holes, the rest covered), thatll actually give you 868 degrees or something like that. I think that 4 holes is good though otherwise youll end up steering too much for a wheel with such a small diameter. Make sure youll use a ziptie and pull it hard, for the steering wheel connector, that way you lock the last part containing the loose wires and youll not damage them as easily.

Can you do this for non force feedback wheel?

Anyone figure out how to do 900 degree rotation without risking damage to the wires?

Does it turns forever to right or left? You broke the limiting plastic. Is there a way to limit the turn?

Interesting. I have this exact wheel. Would it be possible to 3d print i new coding wheel for the ff. Also. Completely striping off the wires protective rubber housing may save the wire from knotting up so much.

Omg how did you made that

Were it 900 degrees

Can you tell me what your PID values are??

Tyś jest przegosc...

This will kill the cables

Perfect ... when first drift ???

Congratulations

I got the same MS Sidewinder Wheel :D And nice work.

Ale jak w grze mieć to 900 stopni

Its for ps4 or PC Please tell me

Hey do u know if you can connect pedals with a RJ11 port to a pc to use with Logitech driving force gt

fajne to jest ////////

thank you I succeeded in this experiment with the microsoft steering wheel

Dobra, tylko teraz problem bo potencjometr wykrywa tylko 270 stopni,

On this video map sensor is installed incorrectly ! It is going to be changed soon :)

What is going on here? Afrs are super rich, map reading is fucked, and voltage seems oddly low...??

szalony szaleniec!

Good job

Hello, if you are still watching comments here... can you please give me a hint how can I get into paddle switches to clean them? Thank you :)

Da się mieć 900 stopni w kierownicy thrustmaster 458 italia ? Ma ona 270 stopni, a chciałbym mieć przynajmniej 900