วีดีโอ

Like the transom mount, did you glue it or bolt it down??

Got a full length video of how you set up the trolling motor and fish finder?

Where did you get ammo boxes at? Nice idea??

Could you please let me know what max speed you are reaching. Thank you

I would love to see what you came up with for the swivel seat as I had the same idea. I borrowed the idea from the pelican catch pwr 100 and even bought the same ergo 360 seat and swivel base and fabricated a base out of aluminum rods.

Thanks for great informative video ! I have a question : Overall are you happy with outlaw for fishing ? How do you transport that ? ( on top of the car ) Many thanks in advance .

Do they fit a 15 to 17 inch laptop(bag)?

Peaceful

How much is the motor ? Around 400$

Thanks man. I'm learning more about engineering from kayak mods than from college.

I hope you still have your perception rear not cracked. I did not see where you put extra support under the Trac on the inside to help spread the stress when you have your motor mounted to it to keep the Bolts or whatever you used to mount the Trac with from having a lot of stress on the Track Mounting bolts on the inside. That is the main purpose of installing a rear hatch cover so you can get to the inside.

Robert. , I really enjoyed your presentation and upgrade😅. Wondering if you could do another telling what size battery you use and how long does it last, also could you show how far your reach is to your speed handle from your seat and other reaches.

You could probably use rod building thread epoxy to seal any area where water is getting in around those trolley mounts.

*Great little trolling motor **enjoyable.fishing** recommend had it hooked up to my 15 foot old town canoe and it pushed it pretty good with me and my son (220 pounds each).*

Just picked one up today let me know what other tips you got

Ammo can is a great idea. cannot believe they want almost $70 for a saddle bag

You can paddle faster if you put your feet on the foot pegs plus you need at least a paddle that is around $150 and up to make a huge difference. The paddle is almost if not more important then the yak

I read other reviews that these flex really bad and if it's windy it will blow you everywhere.

Nice idea with the motor mount but I would paint it black so it don't look so ghetto.

You should remove all your screws and add silicon to them. No more leaks

Can you plz tell me what exactly is the conduit hanger called that you used and what size it is???

Could you steer with the extension or is it too far out of reach

Check this: shad.co.uk/collections/pannier-fitting-kits/products/honda-cbr650-f-shad-3p-pannier-fitting-kit-h0cf64if It says "Incompatible with the SHAD SH23 panniers." but it seems its wrong considering you have already used them. I am really confused if SH23 side bags are combatible with CB650R's SHAD 3P Pannier Fitting Kit or not? (it mentions exactly the same for my model)

Does anyone know if the SHAD 3P System for CB650R (19-20) is combatible with SHAD SH23 side bags?

I have been on that river near Mack's creek can't wait to get back

I'm planning on installing a trolling motor on mine. Have you ever hated reaching behind your head to change speeds? I was in rough water today and thinking it might be a pain.

I thought I was watching Winston Moy 😂😂

Love the mount. Just bought one of these probably going to copy ur mount. Just don’t want to cut that back hatch for the washers

I used the harmony 5" hatch with cat bag by my feet on my outlaw I keep my keys, wallet, and cigarettes and lighter everything stays dry

Minecraft tee shirt deserves a subscribe

Hey Robert! thanks for the vid. I contacted Shad and they say sh23 are not compaitbale with 3p period, there is even a discalimer on the site saying 3p is for sh35 and sh36 only. My question is when you bought this system at the time was this disclaimer still in place or at the time was sh23 listed as "compatible"? im trying to figure out its its some arbitrary H&S issue which is why they are currently listed as incompatible.

Do you know the dimensions of the transducer "compartment"?

You couldn’t make a run to the local hardware store for longer screws? A little foam sheet gasket maker will seal those trolley mounts, located next isle over from the fasteners at that store. Grab a scrap piece of 4” angle iron, prime it, drill it, mount it for your tm mount. You’re overthinking the wheel here man. I could have done all this in a day, not months like you said. Get that thing down off the horses and get on the water!

I'm looking to see if you've upgraded this

Do you think it would be beneficial to get the backing plates for the gear tracks? And what do you think about the top load vs traditional tracks?

Looks great! How much weight would you say your battery and motor add to it?

Hey man I’m not sure if you’re aware or not, but I’ve recently found out about getting some ceramic coating (auto parts store or Walmart or Lowe’s etc) and spraying it on the paddles and the water just beads up and slides right off. Also you can use surf board wax.

Great video, you have a lovely, easy going style about you. I'm surprised you haven't done more videos/vlogs. You're a natural. You never did an update on the luggage on your CBR650F. Is this something you'd consider doing? 🤞 I have the 2017 CBR650F and am thinking about luggage. This is my first bike, I only passed my test last year (a late starter) and I am considering, in a year or so, once I'm more experienced, getting something like a VFR800 with luggage. This is because, I heard that if you put luggage on a bike like ours, the wind hits it as the front of the bike doesn't protect the luggage from the wind and the bike loses control. Is this true? How do you find it at speed? How does it handle? Many thanks.

Have you done a speed test yet? Just curious I'm leaning towards the 62lb thrust trolling motor for my outlaw. Thanks for the video some great info. I'd like to remove the power head and mount near the seat

I use well nuts for everything I mount on my outlaw

How do you deploy the trolling motor once you are on the water? I'm looking for an easy way to do this without falling off the yak lol

Thanks for sharing your build. I have the same kayak, and I’m installing a manual power pole where you have the trolling motor. I am curious if you added backing plates to the gear tracs. Thanks!

Thanks for the video. I want to buy these and found that the mounting is to be bought separately. (shad.co.uk/products/honda-cbr650-f-shad-3p-pannier-fitting-kit-h0cf64if) this is the mounting link - do you think it's both or just one and if just one then is it left or right side

Great video on the shad hs23 model panniers. I'm curious how they compare to fit & quality of the GIVI that look similar. Did you happen to do any research on the givi before you made your decision? What was it that sold you on the shad? How have they performed and are you still happy with them today?

I would like to see the swivel seat prototype the boat is certainly stable enough it just needs to be carefully engineered

All in you're still way less expensive than buying a torqueeto trolling motor for a kayak. I like your setup. I saw on a different video where a guy cut the motor pole shorter put a 90°elbow there and mounted the power head where your ammo can is. That gave him speed control and on off control right at his seat instead of using the extension. I'm thinking of combining his ideas and yours to try to make the ultimate trolling motor mount for the perception outlaw. I just love mine. But it's not that easy for me to paddle it.( I'm a small almost 60 year old fisherman with heart and low back problems). The better fishing lakes near me are not very easy to paddle especially with an outlaw. I've been waiting to find that perfect setup and now that I've added your steering setup and I might use your mounting idea also combined with some ideas from other trolling motor hack videos I think I've come up with the perfect mount. At least perfect for me that is. One more item I need to work out for steering while standing up I'm on my feet usually 85% while fishing. I follow up with all the people I've gotten these ideas from and update you on my progress over this winter. Thanks again for some great information

Thanks for this video. I'm still trying to figure out how I want to install my trolling motor on my outlaw. The steering has been my main question you answered it for me thanks again

awesome job,

The anchor trolley line is upside down... having the bottom line from the pulleys running through the pad-eyes with the top line out of the pulleys tied into the anchor ring (triangle) makes for a stronger set-up with less slack and fewer misalignment issues through the pulleys...

I have to say, I put a harmony hatch in the front and love it! I put my keys and gopro extras in it. You should install it 😉