วีดีโอ

I use the SanDisk extreme Pro to get the fastest transfer rate. The problem with a lot of the new Hi-Tech action cameras is that the card needs to be a fast card or the camera will reject it. The other thing you have to be careful of is counterfeit SD cards. There are lots of them out there so make sure that if it's a really cheap card chances are it's a counterfeit card. I think I went as high as 512 in my action for using a SanDisk extreme Pro. However, you're probably better to go with a 256 and if you get the 256 SanDisk extreme Pro, it'll be just fine

@@blueCollarGuy Thanks for the prompt reply. You deserve my subscription

You're welcome. I try my very best to answer every comment that I get

You're welcome. Thanks for watching. New videos uploaded regularly.

Thank you for watching. I use telesin ND filters.Try using a stronger filter or less shutter speed to reduce the flare from bouncing off the sensor. I hope this helps. Experiment and send me a link to your channel so I can check it out. Take care

Thanks for your input. I was going to do separate videos with the firmware update and the 32 bit float transfer. How long do you like your videos to be ? I would appreciate the feedback

Interesting and clever response I hope you become a subscriber I would appreciate your input

Thank you for watching. All my viewers are very important to me and I appreciate the feedback

To be clear when I published this video it was the only one like it on you tube. I did my research first. I've noticed others since then. Thanks for all the new subscribers and the overwhelming support 😊

That's great I'm glad you found a good deal. Thanks for watching I appreciate the support. Going to be uploading regularly. I have a new video in the works right now.

Thank you for watching my machine is still working fine. Takes more time but eliminates aggravation. You can also use it with a power station like the vtoman 1800x . I did a review on that too.

The machine was 300 Dollars the filters are 70 dollars. I agree with you it's expensive but all air cleaner that have good cleaning ability come with expensive filters.

@iamindysingh a z-axis stabilizer arm on the gimbal would require more room. less mobility

You're correct. Compromise has to be made. Look at all the Hollywood car mounts look at their gimbal setups. There is a reason for that. The quest for super smooth footage is a tricky one

Take a look at car chase gimbal setups. Z axis is always used. Bicycle or motorcycle smaller but similar.

It's confusing, here's how I understand it. The electronic gimbal keeps the camera lens level at all times. And in the videos, the horizon stays dead center. The electronics do this flawlessly and it is truly amazing, and never available anywhere near this price range until just a few short years ago. However, things close to the camera, along the sides and below, move up and down within the visual frame, because the camera physically is moving down and up relative to those passing objects, all the while holding its steady aim at the horizon.

You're welcome. Thanks for your support if you think this might help other people you have my permission to share it on your Facebook. Take care more videos to come!

I just checked my subscriptions and they are going up. I appreciate your input. You Tube is a lot harder than most people know. Take care

If you look at my bike footage there was a jello effect.

My pleasure!

Because pumpkins have a curved surface I would recommend the x tool s1 it is capable. It has a higher price tag. xTool S1 40W Enclosed Laser Cutter and Engraver with Rotary for Tumblers, 600mm/s Speed for Batch Process, Laser Engraver for Cutting and Engraving on Wood, Metal, Acrylic, Leather, Jewelry a.co/d/e09k8IR I never owned this one but would check out some demos. Make sure they are not affiliate or sponsored so you get the unbiased review. Expensive but it will do more than pumpkins. Can make money with this.

Thank you!! 😊

It is a difficult balance to have professional gear on a budget. Used gear can save a lot of money but inspect it good and go to pawn shops. Do everything you can.

@@blueCollarGuy Thank you. I really appreciate your insight.

Thank you. I hope the information was helpful. I have more in the future

Thank you for your input. I have my sister designing me an additional backdrop to address it. I hope you enjoyed the video.

Thanks for your input. I agree with you that they should have accommodated for that. Maybe they will make different versions

@@blueCollarGuy , Peter did a review that included the battery module and also tried with A4 with stabilization and it looks good

Thanks. I knew something was wrong. I have so many gimbals with different start up procedures. It's an interesting gimbal. They have a few different versions. The quality is impressive considering the cost. Every gimbal I have, has advantages and disadvantages. There is no perfect gimbal. I've come to realize that they are to be treated similar to lenses in the sense that they all have their strengths and weaknesses. The only solution is to own more than one. Thank you for your comment I appreciate the feedback.

I did have it inspected it was a quality control issue.

Thank you for your support. If you post any videos on you tube send me a link.

@@blueCollarGuy Thank you. Funny you should say that as my wife and I have a new paranormal investigation channel starting in October. In our first video we unfortunately had to use an old backup camera as our main one broke a few days before the investigation, which is why, after a lot of research, we settled on the Osmo Pocket 3. Our videos will be quite heavily science based with data logged evidence and none of the running around and screaming you see in some ghost hunting videos. I'll send you the channel link when our first promo video for the channel goes out at the start of October. (The first main investigation video goes out on Hallowe'en.)👻👍

@@BlueViking70 that's great. I also made some pumpkin carving videos. I used a tiny laser for one of them .

I agree that new features should be toggled on or off to accommodate these situations

I just did a video about a lense adapter for canon lenses. You might find that interesting. I also have it hooked up to a video switcher as well. It's a good camera for the money.

I agree with you. I was addressing the options in case the ninja walk isn't possible. The long pole idea is very cool. I have a 9ft selfie stick. I originally got it for my bike. People with car mounts use the spring technique also.

Thanks for commenting. I appreciate the feedback

The pan axis of your gimbal is not steady, u may need to send it back to have it check up

It's a very well built bicycle

Thanks for the comment

A lot of TH-cam videos are sponsored and it corrupts the review whether they want to admit that or not.

@@blueCollarGuy sadly i was one that was suckered in, and here i am thinking i found a gem instead of going with a ronin yet here i am returning the hohem for a RS3

No unfortunately

The US dollar is worth more than the Canadian dollar so it will be a lot cheaper with the conversion.

@@blueCollarGuy The Canadian peso be like 😔

You're welcome. They have some issues to work out. Gimbals can be a real pain but they can also smooth things out. I bought a DJI osmo pocket 3 with the creator combo and recommend it.

Describe the problem in detail. Perhaps send me a link to a video.

Tengo el mismo problema y no puedo solucionarlo.

@@oliviakoss Error 3 is with pan lock failure. Just put something like a plastic in the vacant space above the pan lock switch. Problem sorted.

Thanks for the input. Do you like the look of the osmo pocket 3 or the Sony zve10 instead.

@@blueCollarGuy I don't have a ZVE10 so have no first-hand experience. As for the Pocket3, it's okay but it has been rather over-hyped by a lot of people. I don't use mine nearly as much as I expected to.

The osmo pocket 3 for me has been ease of use. I also have the Sony zve10 it's a great camera also. The Sony doesn't up load wirelessly as fast or I have to pull the card. I also don't like the portability and overheating issue. Thanks for watching and don't stop commenting because that benefits me . I appreciate when people take the time to comment.

If you are connected to a PC. A video switcher will still down convert unless it's a very expensive one.

@@blueCollarGuy understand but this obsbot converter will work in 4k? hypothetical situation: osmo pocket 3 >> obsbot uvc converter >> 4k TV will be 4k30 working on tv? Im not good in english so sorry for my try to explain process

Very sorry about your pc volume I test it on my TV working okay . Test it on the phone. Okay for that too. Don't know why it's no good on your pc. I value your input and hope my content helped you. Have lots of creative stuff in the future. I will adjust my intro volume down to even things up. Thank you for the comment

@@blueCollarGuy Normalize the '𝗜𝗻𝘁𝗿𝗼' with the rest of your video so it's the same volume. The inserted channel intro. If you don't believe me, go to the INTRO and adjust the volume so that you can barely hear it. Now play the main video. You will not be able to hear it.

You're welcome. I also have some equipment on the way so that I can utilize my osee gostream deck pro in a different post production way. Keep watching for that video. It will talk about a potentially easier way to edit videos not recorded in the studio. If that interests you it should be out soon.

I didn't notice any problems with range of motion but I will keep an eye on it. The picture quality for streaming has improved. I will give DJI a lot of good credit because they are listening to their customers and they are putting out firmware updates more often than other companies do and that costs money and that also means that they support the products that they sell, so I'm very impressed about that. They've had a few firmware updates with the DJI action 4. As well as the mic too and the osmo 3. Two or three different times. You can also get better picture quality on the DJI action. 4. Now with the new firmware update at 24 frames per second

The gimbal NEVER went all the way to the left lol

I use it with the video switcher to reduce editing time and it has a faster processor than the internal UVC of the osee gostream deck pro

Thanks for the comment

​@@blueCollarGuy Ah, gotcha. So youre using an outboard switcher instead of sending all feeds to your computer and then using a scene switcher in OBS.

Correct. I'm not a fan of OBS. The osee gostream deck pro is basically a computer with its own operating system. Records directly to an SD card. 5 inputs. Cut my editing time to less than half

Are you using the extra battery. Put it on the small adapter. It will run cooler.

@@blueCollarGuy Yeah, I was using the extra battery. I am not sure if it will run longer than 1 hour without the extra battery.

I'm growing and learning. It's a process. If you have any advice I'm listening but I'm on a strict budget after all I'm just a blue collar guy

@@blueCollarGuy I wanted to discuss some challenges we've encountered in optimizing your TH-cam videos for better search engine visibility. Upon review, I've identified areas where we can enhance our TH-cam video SEO strategy to overcome these challenges, such as low video rankings, poor keyword optimization, ineffective metadata]. Rest assured, I'm committed to resolving these issues and improving the performance of your TH-cam videos in search results. Your feedback and collaboration throughout this process are invaluable. Let's work together to implement effective solutions and achieve our SEO goals for your TH-cam channel. Best regards, Md Alamin Hossain

I meant 30 fps lol. You got me. !