วีดีโอ

Why did you first add some new solder before desolder it later? Thank you.

U have nice channel ❤ good luck Ahmad from @gamergy_syria

I have one that I replaced the power circuit but no joy, I think I messed something up so I will go back to it and make a further investigation. It’s fun to do even if I fail

What should I clean it with

Nice video!😁

I've got a Lynx 2 here in bits I need to get back to. Did a power circuit rebuild and recap but was still having issues when I last looked at it. I really need to get that back on the bench and try bring it back to life as it's the original one I had from the 90s.

Einen schönen guten Abend , Ich habe gerade einen defekten DSi von einem Freund auf dem Tisch. Wenn ich das Stromkabel anschließe leuchtet die Orange LED einmal auf und geht dann wieder aus. Spannungen gehen ins Board und die Fuses hab ich auch kontrolliert (haben beide Durchgang). Ich finde online nur Lösungen für den blinkenden Fehler. Hab auch eine gute Testbatterie ausprobiert gibt trotzdem kein Lebenszeichen von sich, nur mit Kabel das einmalige blinken. Bin gerade etwas ratlos. Auf Shorts hab ich grob auch getestet und nichts gefunden!

I have two of these exact units and I installed then brand new in Oct 2009. One has just started making a noise in one of the fans otherwise they still are rock solid. I paid a hefty price for them back in 2009 I think nearly $900 each, but they were for my high end gaming PC I was building back then. In crossfire mode they are unbelievable! I wish I could get my hands on a second hand one as I could swap out the fan on my dodgy one and I would continue to use them as they are great for what I use them for these days. Cheers

Can you fix mine

Hallo, ich hab genau das gleiche Problem. Könntest Du mir einen kurzen Hinweis geben wo Du die neuen Driver bestellt hast? Mein google-fu ist da anscheinend zu mies.

Hello, I just came across your channel. I was just wondering what kind of tape did you use at 4:40?

When Dreamcast was powered on, I pulled out the AV cable and the graphic chip broke, do you know how to fix it? By the way, I live in South Korea.

bro, I need your help. I want to fix my controller because it has a drift issue. I want to change the joystick, but I don't know which one could work or be compatible with this controller. Please respond.

In terms of temps and fan noise, I can honestly say this is the worst card I've owned, but even running hot, the performance was really good!

Niceeeeee one

Mine won't work with a HDMI adapter. So maybe if i clean my power supply?

i also have a same one but when try to charge it it doesnt show the light and does not even turn on but before the seller sold it it was working fine, any idea what the problem would be?

I have 2 PS2 Slims with the same issue. They turn on but I dont get any output. I tried the trick to change the output type. One of them though was working, I put it away and next time I tried it it wasnt displaying anything. No idea what it is

I'm not an expert but maybe it broke some of the solder balls under the GS(Graphics Synthesizer) if you have a heatgun you can try heating up the chipset and if you don't have a heatgun then you can do oven method to mke this PS2 back again (ovening method is not recomended on working ps2's but this one look dead so it should be fine bc I done this method on one of my dead gtx 1650 super and it got working again) (also sorry for my bad english if I made a mistake)

Thank you for sharing

Nice video!😁

Thx so much!

The blue light for me did what this dsi did but not the screen, non of the screens blinked

Nice one 😁😁😀

Well done!

Great video again ❤❤❤❤

Hello please can you tell me the voltage of purple ziner diode n64 power supply

Nice video!😊

Very GOOD job!!! Keep Going!!!

Good job! Of the 2 Game Gears I've had I've managed to fix just the one so far (a VA1). The VA0 I have is being stubborn with fixed horizontal lines and doesn't seem to be reading game. I'm going to get it back on the bench tonight after work and see if I can fix either of those issues. I really want to put a new IPS cleanscreen in it (from RetroSix) but obviously want to make sure it will actually work before spending on it.

Fixed it with a big gap by the hinge

good vid, thanks for da info

What type of solder and flux did you use?

Graag gedaan lief broertje ❤

why’d you share this method if it didn’t work??

Hey i was wondering if i could send you my Nintendo dsi it has the same problem but im not able to fix it(i would pay for that)

hi I have a dsi that doesn't charge, whenever i try to charge it, it turns off. im trying to get some help with repairing it because when I tested all the connections there didn't seem to be anything wrong/

Good to see how to Remove the stick It helped me a lot

I have this ,too!

How did you remove the glue? Do you have a discord and would be willing to help me fix it? I want to learn but I feel a bit in over my head

Ours makes a clicking noise. It will not read the disc. Would this fix the problem? Or is it a bad laser? Ty

Interesting

I have a pile of these. The bigger ones have up to 1.3mah so more useful. I am planning to reuse one of the shells with two batteries inside and one of those charge regulators as a power bank

It should not be legal on so many levels hahaha So wasteful!

Is there any way to add the mode button?

Wenn du an den ersten paar englischen wörtern merkst, dass der typ eigentlich deutsch spricht :D.. schöner mod und gut gemacht allerdings haust du damit ne tonne inputlag drauf mit diesen billigen av2hdmi adaptern... besser composite und dann upscalen mit nem hochwerigen scaler und bisschen mit den filtern spielen.. aber ich verstehe deinen ansatz nette idee

How to put back the button easily but it works

I have a problem with this extension. The additional memory works, but the clock does not work (no clock found message). I tried replacing the clock chip but it still doesn't work. What might be damaged? Ich habe ein Problem mit dieser Erweiterung. Der zusätzliche Speicher funktioniert, aber die Uhr funktioniert nicht (Meldung „Keine Uhr gefunden“). Ich habe versucht, den Uhrenchip auszutauschen, aber es funktioniert immer noch nicht. Was könnte beschädigt sein?

might want to consider using flexible LED filament as it would be a better direct replacement for the florescent bulbs