- 2
- 63 035
Asakura
เข้าร่วมเมื่อ 11 มิ.ย. 2015
Assembly video instructions - Radial Engine - Compressed Air Engine - 3D Print
Hi guys,
This model is an experimental project.
It might be evolving and you can modify as you want to make the best version of it.
Don't hesitate to make your own and to upgrade it. Please send me a message if you made some modifications.
Other parts required:
1 pcs Pneumatic connection 6mm male thread R1/8 Connector Push to Connect
1 pcs M4x45mm bolt (this can be any desired length)
10 pcs M3x10mm bolts
30 pcs M3x30mm bolts
2 pcs nut M4
3 pcs washer M4
6 pcs washer M3
2 pcs 604-ZZ bearings
10 pcs 3mm brass collars (these can be cut from brass tubing with inside diameter of 3mm and outside diameter of 4mm)
Download : www.thingiverse.com/thing:2813256
Disclaimer: If you wish you 3D print this engine, do so at your own risk. Working with high pressure air is DANGEROUS and I hold no responsibility for your actions. All parts were printed to the highest strength possible and I can't guarantee that your parts will be the same.
This model is an experimental project.
It might be evolving and you can modify as you want to make the best version of it.
Don't hesitate to make your own and to upgrade it. Please send me a message if you made some modifications.
Other parts required:
1 pcs Pneumatic connection 6mm male thread R1/8 Connector Push to Connect
1 pcs M4x45mm bolt (this can be any desired length)
10 pcs M3x10mm bolts
30 pcs M3x30mm bolts
2 pcs nut M4
3 pcs washer M4
6 pcs washer M3
2 pcs 604-ZZ bearings
10 pcs 3mm brass collars (these can be cut from brass tubing with inside diameter of 3mm and outside diameter of 4mm)
Download : www.thingiverse.com/thing:2813256
Disclaimer: If you wish you 3D print this engine, do so at your own risk. Working with high pressure air is DANGEROUS and I hold no responsibility for your actions. All parts were printed to the highest strength possible and I can't guarantee that your parts will be the same.
มุมมอง: 25 541
วีดีโอ
Radial Engine - Compressed Air Engine - 3D Print
มุมมอง 38K6 ปีที่แล้ว
Hi guys, This model is an experimental project. It might be evolving and you can modify as you want to make the best version of it. Don't hesitate to make your own and to upgrade it. Please send me a message if you made some modifications. Other parts required: 1 pcs Pneumatic connection 6mm male thread R1/8 Connector Push to Connect 1 pcs M4x45mm bolt (this can be any desired length) 10 pcs M3...
How do you time the air flow in and out ?
Really Nice. Thanks for the video. Unfortunately I don't have a 3d print. :(
Wonder how it would work with another radial motor attached to the other end to act as a booster arrangement? You know, like the Radial engines of WWII did? (The BMW 801 comes to mind.)
That's pretty funny I recognized this guy from thingaverse before I saw his channel.
Wow do more of these pld
Spectacular! What filament did you use?
That's cool!
What air pressure are you using in the video to drive this?
Do the revolutions pushing the piston movements force more pressure inside increasing the power? Just curious
Hi Asakura, I like the design of this engine and would like to make it on my lathe. Would you be kind enough to share the drawings and measurements of the parts.
if you have a CAD software you can download the stuff on thingiverse
This engine uses air flow to flow air, interesting. Now really, very good job
no more videos?? why
I have printed the mold,but failed.parts cannot mach well
What PSI and CFM are you running there?
Good job!!! What is the music play during the video?
like all you tube music....crap.....
but fucking music……..
Nice IDEA, write me for a project
Do you think you could design one with little to no hardware?
this is awesome!!!
Holy shit this is awesome
I've been looking for this even before having my first 3d printer. Thanks a lot it's super cool! Well done :-) Will you make more engines in the future?
thank you very much ! I will try to perfect this one but, yes I will design another