วีดีโอ

A nice tunnel to hide in if you have a Dirt Bike.

This is in Lincoln UK. Feel free to use it in your own vids. No copyright.

I changed the bearings for £10. The Bearings are 6303 and 6202. RS at the end means Rubber Seal. Does not matter which ones you use. You will need a T25 torque(star) socket, alternator freewheel removal set that fits a Ford.

Just thought I would share this as you might not know there is a fuse where it is. RING Smartcharge Pro 50 Amp battery charger. This was in a skip.

Not seen this type of starter before. Lucky I had a solenoid that fitted. The solenoid I had is similar to what fits on Ford Transits/Jags etc. Anyway all done and working after a clean and new grease.

This is the second heated bed I`ve made for the Flashforge Finder. Not perfect but works ok. Don`t forget to earth the metal plate.

I used a microswitch to turn off the heated bed after printing.

A step by step guide how to make a 3D printer heated bed. Total cost around £60.

Well I give up and will carry on buying baccy from the shop. But I think I might of made some Net Zero Carbon Neutral Eco Friendly pesticide. Greta will be happy.

This game is far from finished. I`ve only spent a few hours programming. Feel free to add any idea`s in the comments. I`ll update progress weekly. Speed is the main constraint. It`s written with BBC BASIC for Windows.

Just a clean up, oil and it works.

I`m quite happy as my home made Smart Alternator Tester Kit worked. You increase the duty cycle to increase the Alternator output voltage. Disconnect the C wire to the Alternator and it works as a normal 14.2 volt Alternator. Might help out if you want to use a normal cheap battery, charging a caravan or having charging problems from the ECU. I`ll share the Smart Tester I made in the comments w...

If you wondered what these holes in the dam are like inside.

I made this to test my friends Subaru Impreza Alternator. It has a smart alternator which can sometimes not charge the battery. Next video will hopefully show the testing of the alternator. Just waiting for back bearings to arrive. The ECU can sometimes send a no charge signal. If you cut the C wire I think it goes back to an normal alternator charging at 14.2 volt. Check before doing that. I m...

Subaru Impreza WR1 Alternator Test. No faults found yet. Might be the ECU needs resetting.

ZX Spectrum Finally done.

ZX Spectrum Upper RAM finally working. Broken track.

Loading a ZX Spectrum game without using a keyboard.

Arduino Mini Robot Programming.

BMC Diesel Fork Truck Starter Motor Repair. Magnet Marelli.

I wrote a 2D Gravity Simulator in BBC BASIC.

Raymarine Smartpilot X10 Repair Fail.

Short Boat Trip.

BBC ACORN A3000 CMOS battery change.

SCUM Air Tours.

Simple Arduino Game.

SCUM Stuntman.

£22 USB Microscope Test.

Rain Sensor using an Arduino and compressed air valve.