Another method after you have vacuumed the front is to put a shallow baking tray under the coils, take a Yard Sprayer with water, pump up the pressure and spray the coils clean. A few drops of soap in the sprayer can be used. The tray on the bottom will collect the dirt and water. Empty as necessary, and be sure to unplug the unit FIRST ! If you don't have a Yard Sprayer use a Windex Cleaner type sprayer.
I have / had a great running /performing OBD merchandiser (half the size of the unit in this video) and I dollied it outside to clean it (although it was not very dusty at all) and after using a 150 psi air compressor to completely blow out every spec of dust ... the condenser does not engage/cool. What is the likely culprit (a loose wire?) as the unit worked perfectly before I decided to perform my routine maintenance.
About what your saying with cleaning with compressed air or nitrogen, sure blowing into the face of the condenser is extremely stupid, but what we do is pull the condensers out where we have access to fan side and blow it out with a wet rag over face to catch debris... we also finish with a vacuum to clean up any final debris, imo the nitrogen technique is the best way to clear out a condennsser without washing it.
Thank you for sharing this video. My old freezer went terrible because of cleaning mistakes. I bought a new one recently ( ancasterfoodequipment.com/true-commercial-freezers/ ) , and it is essential to clean it carefully. The video explaining your cleansing process is very informative. I'll use your cleansing methods to keep my freezer tidy.
Thanks for demonstration..Learned a lot..
my only issue is that my freezer has rivets so you can't take the front cover off
Why don’t they make a removable screen on the front of the condenser coils so you can shake them clean?
If you were going to do this for a local corner shop For cheap just a little bit of cash in your pocket How much would you charge per Refrigerator
Thank you for this DIY. It was very helpful. You did a great job explaining the process.
I have a knocking sound right there at the bottom
Use a 10 pound sledgehammer
thank you for the tutorial on how to clean the condenser in the fridge like and share....🙏
thank you very helpful
Nice.
Nice
nice
Thank you bro. So helpful and you have such a nice manner. A great teacher. Be blessed.
Another method after you have vacuumed the front is to put a shallow baking tray under the coils, take a Yard Sprayer with water, pump up the pressure and spray the coils clean. A few drops of soap in the sprayer can be used. The tray on the bottom will collect the dirt and water. Empty as necessary, and be sure to unplug the unit FIRST ! If you don't have a Yard Sprayer use a Windex Cleaner type sprayer.
I have / had a great running /performing OBD merchandiser (half the size of the unit in this video) and I dollied it outside to clean it (although it was not very dusty at all) and after using a 150 psi air compressor to completely blow out every spec of dust ... the condenser does not engage/cool. What is the likely culprit (a loose wire?) as the unit worked perfectly before I decided to perform my routine maintenance.
About what your saying with cleaning with compressed air or nitrogen, sure blowing into the face of the condenser is extremely stupid, but what we do is pull the condensers out where we have access to fan side and blow it out with a wet rag over face to catch debris... we also finish with a vacuum to clean up any final debris, imo the nitrogen technique is the best way to clear out a condennsser without washing it.
Thank you for sharing this video. My old freezer went terrible because of cleaning mistakes. I bought a new one recently ( ancasterfoodequipment.com/true-commercial-freezers/ ) , and it is essential to clean it carefully. The video explaining your cleansing process is very informative. I'll use your cleansing methods to keep my freezer tidy.
th-cam.com/video/OKLHHTvDF4k/w-d-xo.html save yourself some time.
Thank you for the videos, they are very helpful
Where can I find the other 45 videos? These are great and I want to learn more!
What about one of the spray type cleaners from Nu-Calgon?
IDK what that is but if it doesn't REMOVE the dust then DON'T use it. If it removes the dust completely, USE IT.