วีดีโอ

Its actually pretty fast but am pretty sure i had the air pressure to low and thats why it looks slow

P0455 and p0442

I haven’t had any problems with these, they work great, I used them quite abit specially on gm engines,alittle tight on some places but the angle on them make them fit and saves your fingers. The spring on mine fell off couldn’t find it anymore but they work better with the spring off specially on tight spaces.

@ ok cool you think they are top tier to other brands out there?

I would probably said they are pretty similar to the blue point and ther are lifetime warranty to, i wouldn’t recommend buying the cheap plastic ones they flex to much and break

Se recomienda cable de cobre del 6 a 10 AWG, dependiendo que tan lejos y el tamaño del calenton si no esta muy seguro recomendaria contratar un electricista.

The icon wrenches are made in Taiwan and precision instruments are made in the USA, how could they possibly be the same? It's like every other icon tool, a blatant ripoff of a snapon tool, some of which are better than others.

​@@jaseswinconoscan't be a "blatant ripoff" if it has different tooth counts and is marginally better 🤷🏻‍♂️

This guy hates the fact he paid more for snapoff

People gotta stop hating on here just accept the fact that the world evolves and if you got the short end of the stick so be it. It happens.

@itspapaj4732 yeah... except it's not. And so your agreeing with me? they're clearly not the same wrench? What do you call an obvious copy of a product made out of inferior materials? Is there another word for it? The 3/8 split beam torque wrench is one of the only ICON tools I own by the way, and i don't even have a snapon 🙄 I do have a Proto... and a bunch of Williams products.

Yes there is, good catch ,forgot to mention it in the video but hopefully people. Read the instructions haha, but here it is a.turn torque knob clockwise intil maximum torque setting is reached b. Turn Torque Knob counter-clockwise until minimum torque setting is reached. Has to be done 3 times before use every time.

Yes it was blowing hot on the driver side and cold on the passenger side when set to full cold

The Actuator from carquest was like 30-40 bucks not that expensive

@@MTG6.2 did you leave the part number in the subscription?

@@DJ-du1mf minute 6:55 around there pretty sure i show the part # for the one I replaced

It was the temperature one for the driver’s side

Lasted about a year i got a rock chip on the plastic cover and water got in it,it still turns on but it has water in it and it has a couple led’s burn out due to water.

They are pretty simple to replace, hope the video help

@@nhcbluu pretty nice set ,so far I haven’t had any problems with them

Pretty sure is normal , i just tried mine and makes the same noises, i belive its just the release of pressure and the springs behind the jack, I wouldn’t worry about it unless the jack is not holding pressure or not working as it should.

@@MTG6.2 thank you!

Your supposed to bleed the trapped air before use.

I looked it up on their website and it says they do come with it and it shows it on the pictures but am not 100 percent on it,I would probably ask in the store and most the times if your buying something like that they let you open the box to see inside if you ask them.

No, its for the 2.4 ecotec

Yeah that works to or big pair of channel locks,and most of the time for the rear you need a winding kind of tool to screw back in the piston.

Hard to say but I think the belt might be in the grooves other wise the belt would of came off already or it would be pretty chew up by now, you might have a loose pully but hopefully you get it figured out

Try holding the ratchet on a vice and use a prybar to pry the socket out.

@@DaveSchmidt-z6v does not have a function for camshaft position relearn, it does have one for the crankshaft position sensor relearn for the jeep wrangler, patriot ,liberty, but is not free will have to pay like 35 bucks to use this function.

Is it out side or inside the if i flip it up side down can i see it from the bottom ??

@@MTG6.2 yes it’s at least 1 inch wide.

@@MTG6.2 yes you can see it if you flip it over, it is at least one inch wide and opens and closes on a weak spring and leaks like a siv

Okay I’ll take a look today

Mine does not have any plugs in the bottom, the whole bottom is one piece, the only seals that it has are inside but nothing in the outside,on mine if ends up leaking from any where on the bottom then that would mean the plastic bottle is broken and would need a new one.

My guess would be probably not, until it starts doing it all the time like this one on the video i wouldn’t worry about it,

@@MTG6.2shit mines do😂 now ik

I’m having my rpm’s move a lil bit at idle and a hard brake sometimes think my pump is bad I’m sure it is my car kinda sounds like this

@what_up_doe_AL If it is i would replace it asap before it locks up and breaks the camshaft

Thats a pretty good amount of miles, my guess would be the gasket just got old and brittle, gaskets get brittle and loose they elasticity over time after heating up and cooling down alot.

Yeah thats what i been seen that most people have alot of trouble with it, and your right if the voltage is to low i wont charge usually what i do is use the jump start feature like twice then it would start chargthe battery, the one i have i left it out in the rain for like a week i just forgot i left it out side and am pretty surprised that still works just fine just the chrome handles are rusty looking but it still works just fine.

@@MTG6.2 I use a cart with older batteries to parallel charge the severely depleted batteries. Once the smart charger detect voltage is reached I'll put it into reconditioning mode. Once enough voltage is stabilized in the reconditioned battery I'll trickle charge with very low amps for days if needed. If the best option is to reconstruct the battery then its better to just buy another.

That’s awesome some tool dealers are just the good, some times hard to find, i got a friend that uses this kit thats how i found out about it, from what i heard from him he loves them and uses them avery day for filters and stuff like that, he told me they work great.

Does it have a check engine light on ??

@@MTG6.2no

Pretty good i still use it and in the winter time it sits outside in the snow and dont have any problems with it.

Hopefully you can get a replacement