วีดีโอ

Do you know the brand of your post hole digger it looks like mine but I don’t know the brand

Your tip is worn out. Replace tip and cut blades. They make drill tips that will sink that bit all the way down before you can shut it off

I learned zero from this waste of my rime video

you bought the wrong kit not saying it wont work but yesterdays tractor has the correct sleeve and seal kit part Item #: 173253 $52 plus shipping no jacking around and works. I own 3 2000 and 2 3000 series have used this on 4 of them. Hope this help every one

4 years later, still no part numbers

I have a Ford 4500 backhoe similar to this. Cool old tractors.

Part numbers?

Parts # where' ?

Genius

before you pull steering wheel remove the nut then spray brake cleaner on rag wrap around the shaft cover that with a spray can cap add brake cleaner several times.Should be able to woble the wheel by hand.

👍👍 My parents post digger didn't have a hole in the case casting like your's. So my dad welded a short piece of heavy wall 1-1/4" pipe to the side (where you put the horseshoe, above the auger). Then we would stick an old railroad spike bar in the pipe. Dad would remain on the tractor, to operate the up/down action to clean out the loose dirt, while I would pull down on the bar. Always had to be super careful, so I wouldn't get caught by the auger!!! If we hit a rock, or if it hadn't rained for a while and the ground was quite hard, then Dad would get off the tractor and help me. (This was half-century ago.)

hmm manuel is his name...

Nice tractor, I have the same one handed down from my father. Where did you get that red foot step from? I need that.

I'm 57 soon to be 58 God's will easy trick put diesel around the rim and tire 😀😀😀😀😀😀👍 😳 OMG one or two walks with the hammer done. Putting the tire back on even easier 🙏

Does the Ford 3400 has the same system?

So disappointing when anything goes wrong, so many people just take God’s name in vain

Exact same tractor thank you much !

Very nice

just checkin but, did you back your truck into it *before* you jacked the tractor up?

That was the bushing that fits inside if the rubber bushing directly under the steering wheel

How do you bleed 7840 tractor hydraulic steering wheels system

That was not a Speedi Sleeve, Speedi Sleeves are not split. That looked more like the sleeve driver. Speedi Sleeves actually work really well when installed properly. Also, there is another seal at the top of the steering shaft that helps keep water out of the tube.

The bottom o-ring was replaced how?

Thanks for an awesome video ! Do you know the part numbers for everything you need to do this job?

How did you get the shaft seal out of the column?

When replacing the seal which direction does it go? Does the spring side go toward the fluid?