วีดีโอ

It’s not self-levelling but not too far off it

It is a special mix for pumping very high cement powder you could work on it after six hours

Thanks for your positive feedback . In this video I revisit the wall and you can see why they gap was left th-cam.com/video/x6xF1NWcPp8/w-d-xo.htmlsi=3wb0vCnzLJXvI9M4 I tried to push them for a bigger TV but they tell me they did not want

The reason I use the MDF was to get a seamless finish with the drawers in the unit. Thanks for your positive feedback

So in front of the media wall, there is a large 5m window and the gap was left for a curtain to slide down the side of the wall. I also thought it should go all the way across, but the client got their way

@@DDconstruction1 I agree mate seems overkill , but the customer is always right

Hi the frame work is 3x2 & the MDF is 18mm

👍

@@stoglegend hi depending on the size of the unit and the fire you would like roughly around €6000

@@sherrieholland9765 thank you for your positive feedback I used 18mm for all of the shelves and 12mm on the face of the unit hope that helps you

@DDconstruction1 thank you

@@platoond that’s a long story basically the client gave me the wrong measurements for a sound bar i’ve learnt a valuable lesson not to build something from somebody else’s measurements

@@dovohofficial you’re welcome it is a excellent laser

@@dovohofficial it is a very powerful laser I look forward to testing it more thank you

Thanks for the positive feedback where are you located the fire is from solution fires

Thanks for the positive feedback 👍

Hi I use 18 mm For most of the unit and I was using 12 mm for the face of it so you get the least amount Exposed edges on the MDF

Thank you for the positive feedback I’m glad to hear you now have a working door handle good job 👍

Thank you! 😊

@@toon_oioi 👍

Where are you based Some people were offered a full service Also behind the TV I have access panels for the right and left cables to the lights In this video I revisit the media wall when it was fully decorated might help you. th-cam.com/video/x6xF1NWcPp8/w-d-xo.htmlsi=JPOMHbdOtQ_M_Fsy

Yes you are correct I have since invested in a respirator mask Thank you for the positive feedback

Hi have a look at this video it will explain as to why there was a gap th-cam.com/video/x6xF1NWcPp8/w-d-xo.htmlsi=dWkE6W2su6Bdio6s

The roof windows are very good to let the light into your house👍

Hi I just pin and screw the large sheets I would use glue on the smaller pieces however if you want to use glue it is good practice 👍

@@ricardorosas3740 thanks for the positive feedback so the glass can be removed to access the inside of the fire and behind the TV I have an access panel on the right and left however if the fire totally breaks and needs to be replaced you would have to take the front face of the unit . Hope that helps good luck with the build 👍

Thanks

Thanks for the positive feedback yes well spotted I foolishly trusted the client to give me the measurements I’ve learnt a valuable lesson not everybody can read a measuring tape

Thank you for your positive feedback I appreciate it

Thanks for the Positive feed back I use 18mm MDF for the shelves and drawers and 12 mm for the face of full unit

@@nathandraycott hi thanks for your positive feedback yes in the video each shelf had its own LED strip and driver wired back to a switch on the wall I will link below the LEDs lights I used LED strip lights / amzn.to/4gtXqhk Led driver / amzn.to/3XDMypJ

Hi yes ill share the plans with my subscribers 👍

Send me a email ddcarpentry13@gmail.com I’ll send them over to you

😂😂

You’re welcome 😊

Yes recommended to the client a 65 inch TV but they insisted they only wanted 55 inch they were very happy with the final product

@@Jaywil765 oh yes If you send me an email I will send them over to you 👍

ddcarpentry13@gmail.com

@@DDconstruction1 Just sent email there now 👍

That would be me 😬😂😂

@@LevelUpTrivia1 hi generally I do not only in certain situations I will . Good observation 👍

@@DDconstruction1 Thanks so you didnt on the mdf media wall, That was impressive.

@@LevelUpTrivia1 thanks for your positive feedback. with the wood screws I use I generally don’t need to Pilot hole or counter sync them. Glad you’re enjoying the videos I hope to do another media well soon 👍

@@DDconstruction1 Shanked screws?

Hi glad you enjoyed the video. I can send you the plans and blueprints for the unit True email. all you need to do is hit that subscribe button

@@DDconstruction1could you send it to me also?

@@milankuppens2377 hi send me an email ddcarpentry13@gmail.com I’ll send you over the plans

Can you send to me as well. I need for 75 inch and 72 inch fire place

​@DDconstruction1 can you send me the measurements also 65 inch tv

go raibh maith agat 👍

Hi yes you are correct prime the MDF plenty of paint in the cut edges Allowed to dry and sand then all screws should be sunk below surface and simply fill and sand

Thanks

Thanks

The timber are use is 75mmx 45mm I think 90 x 35 will work perfectly fine tried to buy them as straight as possible

@@DDconstruction1 absolutely cheers thanks for the advice just one more, for the front facier of the build did you use approx 9 mm mdf

The front face are used to 12mm and the rest of the unit i used 18mm

Best of luck with the build

@@peterhayes2110I used 3 x 2 timber for the framework

@@DDconstruction1 in Australia we have 90×35 or 90x45 MMS that is

We don’t have those sizes here it’s 45x45 or 75x 45

@@edward-l8b3m You’re very welcome

Hi yes you can build in front of your chimney breast but you need to get a slimline fire I used this one on a media wall, to go in front of an original chimney breast amzn.to/4d59iDr

@@DDconstruction1 cheers fella,I’m hopefully coming into some money next year so will be looking to get it done plus a few other jobs.

@@ianbarr7711👍

🤙 I was about to buy the genuine one then I realised all my batteries don’t even fit in it thanks for the positive feedback on it 👍

@@vaughansanders3108 hi ye I can send you over some blueprints. Send me an email ddcarpentry13@gmail.com we can chat through there thanks

I just sent email, thanks..

@@stephendonlevy9473 thanks for the positive feedback. Appreciate it.