- 71
- 156 205
LeVap Aviation
เข้าร่วมเมื่อ 23 ก.พ. 2012
Welcome to my aviation channel ! The channel is dedicated to RC airplanes and full-scale airplanes as well. Videos of RC planes are mostly from our home field El Paso Country Flyers in Arkansas. There are also a few videos of my RC engines. The videos are recorded with my cellphone camera. Enjoy!
And if you like what you see, please hit the like button and subscribe to my channel.
Thank you.
And if you like what you see, please hit the like button and subscribe to my channel.
Thank you.
Extra 300 with weed eater engine (30cc)
Gavin "Goose" Beavers got his first gas powered RC plane with weed eater gas engine converted to RC engine.
This is a video of the maiden flight!
The engine ran great and ,after a few adjustments, the plane flew very well.
Goose said " It's a keeper " !
This is a video of the maiden flight!
The engine ran great and ,after a few adjustments, the plane flew very well.
Goose said " It's a keeper " !
มุมมอง: 1 440
วีดีโอ
North Little Rock Airshow - Jet car Slayer and Biplane Fury
มุมมอง 230หลายเดือนก่อน
Short video of the Slayer jet car and Fury biplane at NLR airshow
North Little Rock Airshow - Ryan PT-22 "Miss Cherie"
มุมมอง 568หลายเดือนก่อน
A short video of Ryan PT-22 "Miss Cherie" at the North Little Rock Airshow on Oct 11-12 2024. The Razorback Wing's PT-22 AC-41-20679 was built in 1941 and served the Army Air Corps at Visalia Army Airfield in Visalia, CA. The Razorback Wing of the Commemorative Air Force is based at the North Little Rock Airport (KORK). Engine: One 160-hp Kinner R-560 five-cylinder radial engine Weight: Empty 1...
North Little Rock Airshow - RC Demonstration
มุมมอง 645หลายเดือนก่อน
I had an opportunity to fly an RC Demonstration at full scale North Little Rock Airshow in AR. Airplane: EF Yak-54 110" Engine: DA-120 with KS 3086 canister mufflers Propeller: Falcon 29x9 Radio: Jeti DS-12 Servos: Blue Bird BLS-43A, BLS -H71B
SD Models Yak-54 , 70cc (Test Flight)
มุมมอง 7613 หลายเดือนก่อน
Engine: 3W 75iUS Propeller: 26x10 Radio: Spectrum NX-8
Royal Aircraft Factory SE5a (Dancing Wings Hobby)
มุมมอง 9764 หลายเดือนก่อน
Wingspan: 63.8" Length: 49.2" www.dwhobby.com/products/16m-se5a-airplane-wingspan1620mm-arf-15-balsawood-scale-airplane-scg42-covering-finished-version-arf
OV-10 Bronco 30cc ( Hangar 9 )
มุมมอง 3235 หลายเดือนก่อน
OV-10 Bronco flying at Jonesboro RC Club Fun Fly in Arkansas. Wingspan : 108" Length : 113" Power : Electric brushless motor 2x Propellers: Biela scale 3 blade
Pee Jay 250 at S.M.A.L.L. 2024
มุมมอง 6155 หลายเดือนก่อน
Just a short video of Doug flying his Pee Jay 250 for me at S.M.A.L.L. 2024 Kit Available at: willynillies.com/buy-here/ols/products/pee-jay-250-prop-jet-w4-in-1-wing
3D Hobby Shop Edge 540 (93")
มุมมอง 4566 หลายเดือนก่อน
Just a short video of the Edge 540 harrier and hovering at MARCS Fun Fly.
F3A Pattern plane Omega II.
มุมมอง 2496 หลายเดือนก่อน
This is another vintage video from the 90' when my buddy Vláďa and I were flying RC planes together. It brings back such great memories!
Stan's SBD Dauntless (Phoenix Model) maiden flight
มุมมอง 9359 หลายเดือนก่อน
Stan's SBD Dauntless (Phoenix Model) maiden flight
Legacy Aviation Muscle Bipe 85", Maiden Flight
มุมมอง 2.1K9 หลายเดือนก่อน
Legacy Aviation Muscle Bipe 85", Maiden Flight
Curtiss Jenny (20%) 105" wingspan (Maxford USA)
มุมมอง 1.7Kปีที่แล้ว
Curtiss Jenny (20%) 105" wingspan (Maxford USA)
Sikorski H-34 RC helicopter (Volume up) !!!
มุมมอง 2.5Kปีที่แล้ว
Sikorski H-34 RC helicopter (Volume up) !!!
I've got one I'm converting to RC planes too!
it sounds really good
@pootis-t6o it has a home made muffler. Sounds and runs really good.
Nice. Electric is easier. But not as satisfying. Fuel all the way.
Hi, beautiful plane man, may I ask what’s a prop u have on it? Thanks
@@tyanhdoThe prop is Falcon 25x10
Great job...love the H 34....real radial start up and run is awesome. Who makes the Kit...or did you scratch build her?
cann that fly on a OS 33gt engine?
Any 30cc single or 40cc twin will fly it fine! So your OS 33 will be perfect!
@@LeVap_Aviation thanks! Is your 40twin over powered for this plane?
@@mov0927 it's not overpowered. I'd say it's perfect for STOL flying. Your 30cc single should give similar performance.
Great flight!! What a fun day flying with you!!
@ConnorJohnson-RCPilot thank you! It sure was a fun day! I enjoyed watching your demo flight, too. You're a very talented young pilot!
@@LeVap_Aviation Thank you so much! I can't wait for the next time!!
Question - that Saito FG-90 weight 7.7 lbs (with mufflers), which is about three pounds heavier than the DA70 recommended engine. How did you balance the plane? Install the batteries in the tail?
@emanuelmota7217 batteries, RX and swith installed at the back of the canopy.
Beautiful bipe, and the perfect engine for it! (I just got the red one, myself. Thinking of installing a BME 102).
just had the maiden on mine, flew very well, i used 5055 580kv motor on a 16x10 prop, gonna change to a 16x8 on 4s 6000mah, no nose weight needed
Have one and 37 % one
עבודה יפה🎉❤
Amazing flying
Hi I am putting one togeather did you use 4s or something else Thanks
@johnkearney-es4tq 4S 5000, but the plane still needed some weight upfront, so you could use even bigger baterry if you wanted to.
Such a nice airplane. Something a little different when pilots want something other than the must have P-51, Corsair, P-47..
Class act 🇬🇧
Does it is able to perform acrobatics (rolls, loops, inverted flight)? Nice view deo
@CarlosRamosFotoHuatulco I do not know if it is capable of basic aerobatics. I have seen it fly twice, just like in the video. No aerobatics.
Nice! I could buy two cylinders and get one free with my Horizon Elite Club 30% discount.. 😎
When I was buying it about 4 years ago I had a discount code which saved me about $300 !
That is some cool shit
great video and explanation of break in procedure!! Ijust got this engine... i fly with Redline oil... how much should I put in this breather nipple? i ony have one on the bottom.thanks!! or did you do any oil for break-in? thank you
@noahschechtel8979 Thank you. And yes, I have injected 20cc of the red line oil through the nipple while turning the propeller before the break-in.
And did you leave NIPPLE and screw in fuel tube while breaking in and then take it off after break in ?THANKS
@noahschechtel8979 The top nipple should always be closed like I have it in the video. The bottom nipple should always be open.
Yes. But I onky have a nipple on rhe bottom.
@@noahschechtel8979 Ok! Then don't plug it up, leave it open !
I'm thinking of getting this kit can you tell me please if the flaps are run by 1 servo each side or 2 servos each side? Also how does the FG 90 pull that beautiful corisar around? Cheers
I don't have an answer to your question as it is not my plane. I only took a video of it.
@jasegazzard3743 This is what the owner of the plane said: the outer 2 flaps on each wing share a servo, and each inner flap has one.
@LeVap_Aviation hi thank you for finding out for me I did think that but thank you for letting me know appreciate it cheers
Hi, Beautiful plane, I also ordered one today. Are you willing to share some information? -prop size and brand - muffler? Saito / Keleo / something else -servo brand and type
Thank you, I love it! The info you're asking about is in the description below the video.
Thanks. Sorry didn’t look at the info in the description before sending the message 😅
@wimbosma2258 That's alright 🙂
Awesome! I just got a turbo timber evolution with floats and live close to this lake! When is the next time that y’all fly here?
Some guys are flying there every Wednesday morning. The next big event is August 24th.
@@LeVap_Aviation thanks! Do you fly anywhere else close by?
@BigOlGoose127 there are several flying clubs in Central AR, but this is the only place to fly float planes.
Great work I havee an OV10 kit to build
How is the new manuver name🤔🤔
Nice ! I've noticed you Cowl is mounted crocked to one side. Is there a reason for that ?
I am not the owner of the plane. I only took the video so I cannot answer your question, sorry.
SMOKIN' little plane!!!!!
It sure is !
Well, that’s one way to make a plane that’s as stable in the yaw axis as it is in the pitch axis. 😎
Beautiful field and the scale takeoff was absolutely breathtaking 👍🏼👏🏼👏🏼👏🏼
Only in the hobby 4 months, got a OMP hobby edge 540 60" last week. Working on the hovers now. Cant wait to get this good. Guess it just takes a ton of practice?
Excactly! Practice, practice, practice.
@LeVap_Aviation yes sir. Been practicing alot today. Can notice im gaining more and more control. Still not near unlimited hover yet. Ill be patient and practice more. Thank you
dude how big is that rc plane
It has 93" wingspan. Powered by 70cc twin cylinder gas engine.
@@LeVap_Aviation okay thank you for telling me cause i thought i was going insane
we have drone at home
True skills.
Brrp, brrrp, brrrp.. 😂
That engine is amazing 🤤
Love that sound. Did that Saito fit in the stock cowl or was there an "enlarged" cowl you had to buy that Gator Rc mentions on their page?
The owner of the plane, Nick, said it is the cowl that came with the plane. But I believe he said they started putting the bigger cowl in the kits.
Great video. Do you know what motor was in it?
Saito FG-90 R3
Que som maravilhoso,meu preferido, parabéns pelo vôo e o aviao 👏🏿👏🏿👏🏿👏🏿
Parabéns amigo,belo avião e que pilotagem lindo mesmo ,top 👏🏿👏🏿👏🏿👏🏿👏🏿✈️✈️✈️✈️✈️
One of the most adorable model engines along with the Cox Pee Wee 0.020.
Thanks for this video.
What brand wheels are those and size ? The cub looks and flys great
10" PMT Bushwheels
'Promosm' 🎉
Basically jumped off the ground. Amazing.
Beautiful Corsair. Awesome sounding engine. Nice landing.
what prop were you using and were was the cg with gear up or down?
Not my plane but the prop is Biela 25x10 I believe, not sure about the CG.
Inverted, gear up and it’s a falcon 25x10 2 blade semi scale.
Great sound!
What tires are you running?
10” PMT Bushwheels
@@nicholasbennett63 Thanks! Great looking plane BTW!!!
I love everything about that plane👍 awesome!
Beautiful plane