วีดีโอ

Diluted bird shit

Me too!! I bought it in Germany back in the 80's :-) Still have it, and it's still good. Best wishes from Norway :-)

Me too

In my experince different sizes can achieve diffrent levels of stability, but you can learn and have fun on just about any size. That being said I'm not a pro skimboarder, and I would recommend looking else where if you wnat the ideal recommended size.

1/2 inch, so 1.27 cm. We did this because the only widely avaible cheap option in out area was either 1/4 inch or 1/2 inch. I haven't got the chance to try but it might work better to go slightly less than 1/2 inch, but I think 1/4 too thin.

Just the top of the board in this video, but we have experimented with diffrent method. Once we tried a small round over on the bottom and a larger round over on the top that met in the middle. That worked well, but it didn't make a huge difference. I'd say the only thing to watch out for is making the bottom edge too sharp, but that can be adjusted with sanding at anytime.

I'd agree it's probably not that rare or special, but it works well.

Cheers, i live in Sweden and eskilstuna knives had incredible steel

It loks like a solingen a old german knife brand i just bourt bougth a knife like that but a difrent blade

Sorry to say that I drew the design by hand so I can't give you a pdf or anything. If you're truely intrested in the dimensions I could email you a photo with some measurements next to it. Also the method I used to draw the design was pretty simple: I folded a piece of paper in half and lightly skethed the curves until I found a shape I liked. Then I traced the sketch with a darker stroke, cut it out, and traced that onto the board. After that I cut one half of the board, and just to be thorough, I used the cutoff to trace the other side so it was perfectly symmetrical. Obviously, that is a pretty involved process, but it was worth it for the first board. ( I used it as a templet to make several others boards of the same dimmensions)

Email me the photo and measurement

I wouldn't email you shit, you gotta ask for it's called manners.

Sorry you didn't enjoy the video, I'll be the first to admit it was a quick job meant mostly to refesh the usefullness of the blade and no necessarilly to refurbish the looks. If you're looking for more thorough restorations, stick around on this channel and there may be some soon.

his video was good lol u just have to bitch about something

It's intresting that you found the company, although I can't confirm anything thing since I found the knife second hand,.

I believe I bought some generic polishing wheels off of amazon, this link seems similar. www.amazon.com/Rocaris-Abrasive-Buffing-Polishing-Dremel/dp/B075C72PGK/ref=sr_1_1_sspa?dchild=1&keywords=polishing+dremel+bits&qid=1597096958&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFTVUxMTEI1R1hWM1YmZW5jcnlwdGVkSWQ9QTA4MTA4MDQyTTc1SlVJMU43TE0zJmVuY3J5cHRlZEFkSWQ9QTAwMjU4NTMyNENLV1A5VVY0VFgyJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== That being said, I wouldn't say that I highly recommend these, but for what I was doing they worked fine.

R B we used an old water based varnish, considered using resin but not really in our budget :)

@@makeitall3898 Back in 1984 resin was $5.99 a quart! What happened? :)

why do old people always have to tell things about how they use to do stuff 🤣

That's Dope!

Bibliothèque Cleverness Bookshelf looks like solingen from Germany

@@angelcisneros1777 Thank you very much.

Bibliothèque Cleverness Bookshelf no problem l have 2 similar l am pretty sure is a solingen knife from Germany

(very late reply: sorry) I got this knife second hand, so I don't have information on the history. I hope you got the info you wanted.

I have one almost identical. At base of blade reads E A SHARPWELL CO SOLINGEN MADE IN GERMANY 221S