Yes, a hinge or pivot point would work as well. My brother came up with the design and he had the wheels sitting around so he decided to use them. Honestly, I didn't give that aspect of the design much thought.
I made a screener,pretty much the same concept. I have a few tips, load from the other side and pull soil as it builds up, dust will kill that engine quick,so change air filter to a Honda OEM, change to a smaller belt or tighten tension on idler because as you put weight on screener belt becomes loose and reduces rpm to screener. th-cam.com/video/BcS1Mfbe-6Q/w-d-xo.html
RENT That looks absolutely awesome!!!! Great job!!!! I'm sure it's a long shot, ever thought about renting that thing out? What state are you using it in now? I heard you say Ohio built with plans for Florida?
Hi guys i live in Western Australia and would love to make one of these for my hobby farm is there any chance that i could get the plans of you i am willing to pay for them i just have that much lumpy soil i need to screen you can contact me on email lynchmobmt@gmail.com would appreciate any help Tony Lynch
Nice job! I think you may need to add couple of angle supports under the screen. Looks like the screen is spanning a fair distance and will fail over time due to soil weight.
Thats what I was thinking myself, I started screening flower beds that had several layers of rock in them by hand last year. I had to add bracing because I kept damaging my screen shaking by hand, actually was putting in too much dirt at a time. Mine was made from 1×1 wood. Worked this 65 year old to death. Started watching videos now I'm going to build a powered one to save my back and shoulders. But like my dad once said boy get yer ass out there and get those rocks outta that dirt.
Build the screen deck. Set it on springs. Take a rear truck axle with rims on it (no tires). take 3 or 4 inch diameter pipe and cut it in half, making 1.5 inch or 2 inch half circles. Weld those to the rims that are still mounted to the axle and differential. Weld 6, 7, 8, or 10 of them to the rim so when it spins they would bounce a ball up and down if you could keep it on top of the rim. Mount 2 rims with tires on them to the shaker deck, both on axles. Line them up so they're touching the rims on the truck axle with. Sooo, when you hookup the differential to a motor, the motor spins the differential yolk, which spins the bare rims, which spin the tires mounted to the screen deck. There you have a deck that vibrates when those rims spin and every time the half circles hit the tires on the deck, the screen bounces. There's no belt to break, no counterweight, no "special bearings" to replace when they go bad, and heavy duty bearings made for trucks and trailors.
GREAT JOB !! I just recently built one , but it has no shaker. Now I see the simplicity of it. Such a simple machine, but vital when your in the dirt business! Thanks again for sharing!!
Nice build, one mistake. you needed to put a cover over the counter weights. otherwise it will throw dirt back at you and all over the place as it is hit by the falling dirt. quick fix and you'll have a nice and safe machine.
That is a wonderful look, I’m wondering if you could Mae it where it had 3 racks, top rack everything falls through except 3in rocks and larger. 2nd level would shed the next desired, 1 inch and large rocks, . 3rd rack would allow everything left except 1/2 inch rocks. Also it’s to steep. 15% max.... give material time to shed as much as possible.... you can also have 3 different sautés. 3 inch and larger straight out. 2nd Shute to the left. And lower level to the right.. separating the material beautiful... Everything else falls to the center... .. My only other concern is the belt rattling so much, the tension is to flimsy, just my opinion...
I screen a lot of top soil. 35 to 45 degree angle would help you more! That motor is going to suck in so much dirt I really can't see it lasting long. Having to rake the screen twice a bucket really isn't practical at all.
i think its working a-ok. at least for what type of dirt u have there. if u had rocky dirt-would u load it from the rear side-so ur tractor hood didn't get dinged from the rocks right? would u have made the front side a foot lower-so the screen has a better pitch to it-or not? for me mine needs to be a bit steeper-so my bigger rocks will roll off. but i am going to copy ur design for mine. thanks for the video of it. good luck with it.
thanks-u have made my day. wanting to build of these for a yr now. the time has come-and i was between a small grizzly or one like u have down. very simple design. was gonna aask u the pitch of screen but u also talked about that. am going to ur channel to see if u have posted any more videos of it. thanks again.
LAKESIDEBOB1 - Just looking at this, I see quite a few open rotary parts, great for causing personal damage, injury. Some 1/2" Construction Cloth Wire Mesh Shield, should not be too Expensive to Create and add, to keep fingers, hair, etc. out of those moving parts. Even the 1/4" type, for even better protection! That would also protect belts and drives from rocks causing a thrown belt, etc. Otherwise, it seems to be a good start. Keep at it!
Good job. Why the wheels at the front? Would a hinge/pivot do the same job?
Yes, a hinge or pivot point would work as well. My brother came up with the design and he had the wheels sitting around so he decided to use them. Honestly, I didn't give that aspect of the design much thought.
Best!
Where did you find the large pulleys
I honestly can't remember but TSC or Rural King may have them.
I was thinking a pulley off of a cement mixer could/would work although I think those are single belt pulleys?
Where did you get the counter weights and bearings?
We picked up the pillow bushings from TSC if I recall. Nothing exotic. However, my brother is a machinist and made the counterweight.
I made a screener,pretty much the same concept. I have a few tips, load from the other side and pull soil as it builds up, dust will kill that engine quick,so change air filter to a Honda OEM, change to a smaller belt or tighten tension on idler because as you put weight on screener belt becomes loose and reduces rpm to screener. th-cam.com/video/BcS1Mfbe-6Q/w-d-xo.html
I used 7/8" crusher screen on mine and just bolted the top it works pretty good , kenfad6188
it would be great to show this in action too you know
Still use it? What changes were made?
RENT That looks absolutely awesome!!!! Great job!!!! I'm sure it's a long shot, ever thought about renting that thing out? What state are you using it in now? I heard you say Ohio built with plans for Florida?
30 degrees and (1) counter weight dead center with a pillow block each side connected to 3 x 3 x 1/4" angle
This is excellent. Where can I buy one? :)
Dove si può acquistare
Sweet lil design and build . Hope she screens like mad dog 🎯👍😎
Counterweights will destroy your bearings in no time ...
Very well made man thank you for the idea
Hi guys i live in Western Australia and would love to make one of these for my hobby farm is there any chance that i could get the plans of you i am willing to pay for them i just have that much lumpy soil i need to screen you can contact me on email lynchmobmt@gmail.com would appreciate any help Tony Lynch
A rotary trommel would have been more work to build but would have worked way better.
you have been a lot of help ! Thanks!
I am all done with my dirt shaker and I will be selling it shortly.
How much you selling it for?
@@tommyzumwalt9737 $600
Where is it located?
this is a great looking sifter and you did a great job exsplaining this thing . i'm looking for the next video. thank you for showing!
Nice job! I think you may need to add couple of angle supports under the screen. Looks like the screen is spanning a fair distance and will fail over time due to soil weight.
Thats what I was thinking myself, I started screening flower beds that had several layers of rock in them by hand last year. I had to add bracing because I kept damaging my screen shaking by hand, actually was putting in too much dirt at a time. Mine was made from 1×1 wood. Worked this 65 year old to death. Started watching videos now I'm going to build a powered one to save my back and shoulders. But like my dad once said boy get yer ass out there and get those rocks outta that dirt.
Are the steel castors transferring vibration?. I thought the idea was that they were to be rubber?
Build the screen deck. Set it on springs. Take a rear truck axle with rims on it (no tires). take 3 or 4 inch diameter pipe and cut it in half, making 1.5 inch or 2 inch half circles. Weld those to the rims that are still mounted to the axle and differential. Weld 6, 7, 8, or 10 of them to the rim so when it spins they would bounce a ball up and down if you could keep it on top of the rim. Mount 2 rims with tires on them to the shaker deck, both on axles. Line them up so they're touching the rims on the truck axle with. Sooo, when you hookup the differential to a motor, the motor spins the differential yolk, which spins the bare rims, which spin the tires mounted to the screen deck. There you have a deck that vibrates when those rims spin and every time the half circles hit the tires on the deck, the screen bounces. There's no belt to break, no counterweight, no "special bearings" to replace when they go bad, and heavy duty bearings made for trucks and trailors.
Have you seen any videos of this or done this?
Most dangerous thing ever hahah XD
Did you get it working better?
If you put both counter weight to the same direction it will shake more
GREAT JOB !! I just recently built one , but it has no shaker. Now I see the simplicity of it. Such a simple machine, but vital when your in the dirt business! Thanks again for sharing!!
Nice build, one mistake. you needed to put a cover over the counter weights. otherwise it will throw dirt back at you and all over the place as it is hit by the falling dirt. quick fix and you'll have a nice and safe machine.
Have you thought about replacing those wheels and putting more springs you might get a little more bounce
How'd this work out?
It works well in sandy soil. However, it in clay it is a different story. For clay you will need someone with a rake to help sift the soil.
@@clarkhuffman1975 thanks for the update. Im thinking about making one. Anything you'd change?
@@scottfry9466 I would probably put a shield over the engine to keep the dirt out of the engine.
That is a wonderful look, I’m wondering if you could Mae it where it had 3 racks, top rack everything falls through except 3in rocks and larger. 2nd level would shed the next desired, 1 inch and large rocks, . 3rd rack would allow everything left except 1/2 inch rocks. Also it’s to steep. 15% max.... give material time to shed as much as possible.... you can also have 3 different sautés. 3 inch and larger straight out. 2nd Shute to the left. And lower level to the right.. separating the material beautiful... Everything else falls to the center... .. My only other concern is the belt rattling so much, the tension is to flimsy, just my opinion...
I think the tensioner pulley needs to be on the on the other (relaxed) side of the engine pulley.
I screen a lot of top soil. 35 to 45 degree angle would help you more! That motor is going to suck in so much dirt I really can't see it lasting long. Having to rake the screen twice a bucket really isn't practical at all.
Good job
I would weld on some side skirts. You're pouring dirt on top of your engine, belt and pulleys.
i think its working a-ok. at least for what type of dirt u have there. if u had rocky dirt-would u load it from the rear side-so ur tractor hood didn't get dinged from the rocks right? would u have made the front side a foot lower-so the screen has a better pitch to it-or not? for me mine needs to be a bit steeper-so my bigger rocks will roll off. but i am going to copy ur design for mine. thanks for the video of it. good luck with it.
thanks-u have made my day. wanting to build of these for a yr now. the time has come-and i was between a small grizzly or one like u have down. very simple design. was gonna aask u the pitch of screen but u also talked about that. am going to ur channel to see if u have posted any more videos of it. thanks again.
Finally! Someone who understands that making a video about a shaker knows that you need to show clearly how it works. Thanks.
works??
Belt snapping in 3, 2, 1...
never snapped the belt
Looks very good, waiting to see a video of in in the gravel. Thank you
LAKESIDEBOB1 - Just looking at this, I see quite a few open rotary parts, great for causing personal damage, injury. Some 1/2" Construction Cloth Wire Mesh Shield, should not be too Expensive to Create and add, to keep fingers, hair, etc. out of those moving parts. Even the 1/4" type, for even better protection! That would also protect belts and drives from rocks causing a thrown belt, etc. Otherwise, it seems to be a good start. Keep at it!