วีดีโอ

@@tomaszatloukal380 I cant see further improvements on the brake possible at the moment... Will se if I coming up with anything else

@@ianbrown1140 I have detailed listing about it on my instagram pinned post and on my favebook page, you can check out my store, I use my own products only.

An old m170

Thx

85° is ideal over 3J, but only if the outside temperature is over 0-5°C

Thank you! No, the file is not public, I gave it to silverback airsoft, they made the fast chamber based on this. Available in most stores.

Silverback m160

Sounds much nicer, I paired the v2 gear with a 13:1 gearset and a nylon piston, so not sure how the out of the box v2 works.

@@facelesssniper3057 Thank you for the response, cheers

If everything installed correctly the only thing can cause it if the searheight set too high out of the box. You can adjust both sear height and trigger box placement so the sear can release the piston. The reason for this probably that the stock spring guide is flexible and can slightly bend and shift, but this one is solid.

Yes its installed, better a lot but still not really silent. Also added a polymer piston, that silenced it further.

No, the final version is manufactured by Silverback airsoft as the fast chamber :)

If it dosnt catch the sear in the tac41 you either have to adjust sear height a little or move the piston head off on the thread ~1mm and threadlock in that position.

Thank you for the suggestion but a decibel meter from this distance can not pick up the sound of the shot because the background environment is louder (~45-50db) than the shot itself. If the shot placed in direct direction toward the decibel meter it only picks up the sound of the bb passing by (what you can hear on the video)

New mosfet is included with upgrade pack

of course

nope

Could you perhaps make a seperate model that would fit it? Both the MK23 and USP are practically the same in shape so it shouldn't be much of a change@@facelesssniper3057

@@Polaar54 I didnt made this model, I cant even 3D design that good to make it :)

Nagyon ugyes volt egesz nap egymasra vadasztunk

Koszi

Koszi!

Thx!

It is a liemke sperber 25 :)

Yes but dry ptfe is better. It can withstand any spring that you are able to prime.

@@facelesssniper3057 Thanks!

@@facelesssniper3057 And one more question. Would the silicone rubber swell with silicone oil use? And how long the rubber would last with m190 spring? Like ~5000 shots?

@@summer9716 silicone will not have any effect on the rubber. Spring strenght is not really relevant to the wear in this case, well over 5000 shots lifespam expectable for the rubber part.

@@facelesssniper3057 Ok, thanks.

Yes, I have the one of the first series and it had plenty of issues, the shell release button engaged by my glow when just holding the pistol, the sealing was not perfect, the feedlip fitment was problematic, the mag catch of the mk did not engage... Since I made some mods and fixed these working well. The new version is improved I think.

@@facelesssniper3057 Thanks mate.

Thx!

Thx! I will try to keep them coming :)

Thx! And nope

Thx!

Alap

Thx❤

Its the best when the rest of my team carries snipers, it causes a lot of distraction and give them a chance to hunt freely.

Thx!

Thx!

The internals of the SRS are the following: -SBA VMP -FS MF 1.4 -FS POM spacers -V.R.A.G.2. spring guide -FS +fps rings -SBA M160 -Stock chamber -FS perfect spacer -FS 101% seal -FS 85°/70° r-hop -FS 420mm 6.04 inner barrel -SBA open rear sear You can find the rest detailed in the video description :)

It dosnt fit davinci barrels.

@@facelesssniper3057 Not to be rude, but da vinci hop up window looks like the same as original sba barrel so i want to compare the size. So what's the measurement?

@@summer9716 that hopup window is ~2mm longer than what the rhops made for.