Getting started: How to set up, use, recharge and clean your new Kokido Magix 37 Rechargeable Robotic Pool Cleaner.
The colorway of your particular cleaner may vary from the one shown in the video, but the process for using it will be the same. The parts included with your Magix robot will vary depending on the model you own.
1. Take out all the accessories from the robot.
2. Open the filter compartment and take out the paper under the filter.
3. Plug in charger adaptor to the electricity socket.
4. Connect the charger base to the product, the charger on the adaptor light will turn red.
5. Fully charge the cleaner prior to first use (5-6 hours).
6. Remove the charger from the cleaner when it shows green light. Make sure you cover the rubber cap to the charging port.
7. Adjust the retrieval kit cord length according to the pool depth.
8. Make sure there is no gap between the bottom and the top.
9. Switch on the cleaner by sliding the magnetic switch.
10. Cleaner with water sensor activates the motor only when it is submerged in water.
11. After cleaning your pool, empty and clean the filter compartment.
12. Simply clean the filter with garden hose jet sprayer or from water tap.
13. To recharge, make sure the charging port on the cleaner is dry and recharge it for your next use.
IMPORTANT: Charging base is not waterproof, do not put it in water.
Make sure the filter is installed before using the cleaner.