วีดีโอ

Thank you. I love their colour but they are very shy so are often hidden in the plants.

Thank you so much!

Yes, I ended up having to buy a new starting colony for my Blue Dreams. I now schedule a dose in my calendar for every 6 months as I figure it would be insurance against another loss should I have any hitchhikers on anything I put in tank like plants etc.

@@bitsandbobs356 did you use No Planaria? I have used Panacur and I think it’s killed them finally. I didn’t see many on the glass after the second dose like I have the first few days. The losses really suck as shrimp cost like 7-10 a piece where I live. I created a new tank and put a lot of my healthy stock in there as well. The words and scuds decimated my tank.

Thank you

It’s my dads name

Unfortunately I haven't tested the water before and after as the stones were used in a build from scratch. Sorry.

Thank you for your comment, as I'm still new at this TH-cam stuff so my productions aren't very polished. I hope you found it useful.

@@bitsandbobs356 very useful. Thanks again.

Hi Thank you for your idea. My hatch rate seems to be very high as just a few days eggs have resulted in at least 40 fry from what I can count. I also have some Leopard Danio fry in another tank where I just had the parents lay eggs which fell through a grid. I then removed the adults and got quite a few fry to the point where I might have to sell the excess as I was just breeding to stock my 8' tank. I do use MB when it comes to collecting my Corydora eggs as they are usually left in containers that don't have regular water flow. Thanks again for watching.

Yes it is. It's the DIY canister that I put 200 grams Bi-carb and 200 grams citric acid and 300mls water. I'm only doing it to get the pearl weed to condense quicker. Currently cutting it as it grows and re-plant it but it's still not thick/dense.

Thank you for your kind comment. I honestly think I have a long way before I would call what I produce is "Quality Content" as I feel it's still very stilted. I've got to learn to relax when doing voice overs and improve on my video taking and editing skills, but it's always nice to get encouraging comments. Thanks again.

@@bitsandbobs356 np lol :D

Thank you for your kind comment. I'm glad my video helped.

One benefit of using SD cards I could see would be if you only wanted to have a couple of cameras and already had a PoE switch or 12v adapter and didn't want to go to the expense of an NVR. Since I don't use SD cards, I can't say for certain that you can record to both. I would assume it would be possible but as mentioned, not 100% certain.

I'm not sure what you mean by her original name. I've never said her name was anything other than Nora, so not sure where you get the idea the name had changed. She's been "Nora" since we had her when she was a week old.

She looks very similar to my bearded dragon so I was just wondering

Glad it was helpful. I actually was using mine yesterday to do good clean of the car. 2 1/2 hours just on the exterior doing claybar, etc.

If you are talking about the IP address of the NVR, then jump to 15:07 in the video. This is assuming you've used the SADP tool to log in as shown at the start of the chapter at 13:10

Not sure why you want me to pick her up whilst she's having a bath, eating or sunbaking. I do carry her around and often have her on my shirt as I am watering the grass of a late evening so she gets some sun then.

Definitely a girl 😃. I think it's amazing how they hold their eggs like that. I can't wait to see the young ones swimming around when they finally hatch.

Hi I'm not an expert in the various camera that are available as I've had my system up for years and haven't looked at what's come out since then. I suggest looking at some of the videos on the "The Hook Up" channel such as this one - th-cam.com/video/BVg81haX2c0/w-d-xo.html Also check out this site - calculator.ipvm.com/ - as you can input your address and put cameras at various parts of your house, input the camera type and it will give you an indication of what you can see. It does have a short time restriction, but you can re-fresh the screen and start again and for the second (or future goes), you can have your information ready to input.

@@bitsandbobs356 Thousand thanks Brother... 👍👍👍

Glad it helped

I've never used the onboard GUI. Sorry. Hopefully someone else may know the answer.

iCam Security Services. Price was $818 but got a discount of $40.90 (Can't remember why) back in July 2019.

The description on Amazon says "Compatible with E-Mount APS-C and Full Frame camera (NEX , E-mount ,FE-mount)" so I would say "yes" for A7III

I worked it out.

@@jeramiefaint4361 Thanks for that. Would you mind posting how you did it in case others have the same issue? I was going to suggest trying the default password of 12345. Glad you got it sorted.

Sorry, I'm not sure. Perhaps another viewer may have audio enabled cameras and can confirm.

Glad I could help!

Hi Dan, When you go into settings and turn on Motion Detection, what level of sensitivity do you have it set to? Maybe try Medium or High. I usually have it set to "Low" but unfortunately in windy weather, it becomes annoying as it picks up the plants in the garden waving around in the wind and I keep getting notifications. It's a pity it doesn't have the ability to set active zones for monitoring movement. Good luck and hopefully it works again.

@@bitsandbobs356 I think the internal battery was bad, but couldn't get inside it to test or remove and replace. I know when new if the battery isn't fully charged some features don't work and this happened with my older Skybell Classic and I discovered the battery was bloating. But this one is a Skybell HD version 3.1, which is like 6 years old, so I ended up buying a new Skybell version 4.0 and everything works now. But, the Low sensitivity setting is way too sensitive as it's recording motion from bushes being blown by the wind and the bushes are like 30 feet away. I do notice that on this new Skybell that it uses more of a fisheye lens, so now I can see more of my front porch. But the picture is a bit over exposed, compared to my previous Skybell. They said the internal components have been upgraded but other than the fisheye lens, I'm not seeing much of an improvement. The 5x digital zoom is still terrible when compared to other devices that do this. I'm not really happy though that the company doesn't tell us that the battery has a limited life and if we replace it our Skybell will work again. But it seems like now they even made it difficult to get to the battery to remove it. They'd rather have us spend $199 for a new Skybell instead of $15 for a battery. And it's still only 1080P video!

@@Resist4 Hi Dan, I just saw your comment and ironically have just sent an email to them asking them to think about adding the ability to define zones for motion detection. The reason I just did this is there was an update to the app, us it's windy today and I keep getting notifications. On days like this, I turn it off but then that defeats the purpose of having it record someone who may be lurking around your front door. It should be any easy software update to the app.

@@bitsandbobs356 Was windy today here too and I got a lot of recordings of bushes blowing about.

@@Resist4 I just got a reply and they said: <Quote>Thank you for the suggestion. It is something that we are currently working on and is on its final stages of testing before public release. Please look forward to the feature in a future upcoming update to the SkyBell HD app. <End Quote> 👍👍 Good News 👍👍

Hi Dave I'm not sure. Sorry. I would think most cameras don't get great focus with night vision. Perhaps there is a Hikvision forum that may have more knowledgeable people.

Glad it was helpful!

Hi I'm glad you enjoy my videos. I'm very new to doing this stuff so I feel very stilted in my commentary 😃 Anyway, I did a quick Google for "M22 15mm spigot" and found this - www.pressurewasherparts.com.au/m22f_x_14mm_-_22mmm_x_15mm_hose_spigot It's not the complete thing but perhaps you could join it onto a hose somehow. Sorry, all I would be doing is Google searches myself. Not sure where to go otherwise. Good luck and thanks again

Hi, If you can't find a 22mm hose with a 15mm spigot, then the following might be a work around. I found this 10m hose with a 22mm screw and 14mm spigot www.pressurewasherparts.com.au/10_metre_light_weight_%7Cnon_marking_%7C_medium_duty_%7C_high_pressure_hose_with_22mm_screw_connection_hose_fitting I believe you could possibly then use this 14mm to 15mm spigot adapter. www.pressurewasherparts.com.au/m22f_x_14mm_-_22mmm_x_15mm_hose_spigot I'm thinking that might work.

Hi, As I wrote in another person's request for a link to another hose since MaxiPro's link does work was ... I would have to Google for a supplier, which is what anyone can do, so if I was to add another link, it also may become out-of-date at some point, so it's best just to let people Google at the time they need it and for their local area. Hopefully Maxipro might have more in stock soon.

@@madmax1412 all goods thanks for the help max appreciate it

You're welcome.

Thanks buddy.CHEERS 👍👍👍

I would have to Google for a supplier, which is what anyone can do, so if I was to add another link, it also may become out-of-date at some point, so it's best just to let people Google at the time they need it and for their local area. Hopefully Maxipro might have more in stock soon.

The Bedroom and Lounge ones are 4mm, the Garage and Back Yard ones are 2.8mm. All 4 are the DS-2CD2355FWD-I model cameras.

This was literally the first time I used it so everything probably wasn't tweaked as well as it could have been. The very first time I tried the foam, it was mostly water. I had to adjust the dial on top to reduce the amount of water coming in, plus reduce the nozzle opening. I was also conservative with how much product I put in the bottle as it's expensive. At the end where you see me reapplying the snow foam, it's because in the time since I had applied the first lot, I had washed the other side and wanted more foam on this side before washing. I hope that helps.

@@bitsandbobs356 hi mate. you might want to see this video. th-cam.com/video/KUfU8-kjpyk/w-d-xo.html seems just a small Mod and it would make the huge difference. Thanks by the way!

Glad it helped someone.