วีดีโอ

Bless. This video is short and to the point. Love it.

Thank you for the video. Oil change successfully done.

You said you used a 3/4 hose… was that inner or outer diameter?

Add afuse tap u installed it wrong any update do u still have them

Thanks much for the video. Definitely helpful

Lost your 10mm socket?

Great video. Changed my oil in 10’minutes 😊

Wow, thats too bad. It must be hit or miss. I have 229, 000 miles on the 3.7 . The paint sucks but it runs good.

Thanks for the video! Great tutorial

Future just loosen the caliper bolts remove the bottom n flip up

Thank you 🙏🏾 how does it run

Hello, Are you interested in testing our products? We would like to invite you to test the Soft Cab Enclosure Upper Doors for your 2022 Kawasaki Teryx KRX 1000

Not bad for the Pentastar 3.6l V6 producing

Awesome video! Quick easy and straight to the point. 👍🏼 Thanks!

Thanks. Helped tremendously

It looks like you couldn't close the covers back. Does the tweeters touch it ?

Is there a front and a rear differential to do??? Same on a 2020 Nissan rogue?

Thank you so much! This worked perfectly.

He never showed taking the center console out.

This is the best video. The videoexplains why Nissan Rogue's transmission breaks. The Rogue has transmission issues, and Nissan has not fixed the issue.

Where is the link?

Ordered my 3rd headlight now and it’s once again fucked inside

Hack....it's all metric...don't use standard sockets

Yes this helps very much. Most other videos like these say it's a 2015 but they're not. Also the other videos were not as clear regarding the 3 holding clips, thanks!

Had to get an extractor nut set to remove my wife’s drain plug but I’ll definitely be doing her oil changes myself for the future cause the shops definitely want you to come back by tightening the plugs and filters so tight. Blessings my guy🙏🏿

Thanks bro, you saved me a lot of time in the Texas heat tonight!

I was having a misfire in cylinder 4 and the wire didn't budge easily at first being a weird angle to get at it. I carefully stuck a flat bladed screw driver behind it and it pushed off really easily. I hope that is just because I loosened it. On the other hand that would be nice if it was just a bit loose and it was causing my misfire. The only bad thing is I ordered the coil today and it should be there in the morning if it comes as expected. Often when there is a misfire the cause may just be a bad coil. I will shoot the connector on the harness and coil with some quick drying contact cleaner and see if it makes any difference. Usually the connectors are never bad but I do have contact cleaner and it even worked well on a scanner that was not detected on my computer. I would not have used that there if it wasn't safe. A good contact cleaner will work well but do no harm to plastics. I imagine if I took that plug out of #4 it may be a little blackened but maybe not. It is an intermittent misfire, not a loss of that cylinder until the coil is replaced. What irks me is that it took 2 or 3 weeks for the code to finally show up and I was fearing my CVT may be ready to die and finally go out of my life once and for all.

Looks good might do this tomorrow

Not a 15. Tail lights are different on a 15, check the VIN, probably a 14.

Not a chance mine takes 5 to 10 kicks once it's warm it'll start -50 first kick warm doesn't matter.

I have a 2007 R/T - runs like a charm, the 4.0 filter is easy to get at. The 5 speed trans is smooth as silk. 136,000 miles.

Great video. All the details u need to change your own oil. Thanks and God bless.

Hey man, you didn’t have much trouble getting the first bolt off the c clamp? Mine is dead stuck…

I called the dealership the problem is that the key will keep it opened no marher what you do until you make some distance between the car and the key signal, try it again this way, lock the car with the key then leave the key far away then come back without the key and you will notice its all locked up, it frustated me for a few minutes😂

PH6607

So what wires would I need to add new speakers and tweeters?

They are called Torx bits not star, but other than that, great video

Thank you for your video you helped me out !!

Did Mobil one finally get the MS-6395 rating?

I have a 2014 Nissan Xtera with the 4.0 and I think the Dodge Nitro looks a lot like it

I just changed them and now it idles rough, any recommendations?

People have issues removing the cradle that holds the bulb and you didnt show it

That is the same screw to adjust the idle on my kids Tao Tao 110 four wheeler. Looks like the same carb as well.

Thanks for detail of this report . Very helpful This most challenging issue was making sure that all of the sound muting foam is pushed out of the way for the reinstall. Thanks!!

My 2019 AWD took only one quart to do both front and rear. 10mm hex on all four plugs. Thanks for the video!

THE WORST???? HEATER CORE 👈👈

Thanks, man! Appreciate the video!!

good, but man you need more light!

Pretty simple. Nice job.

Thanks bro! It worked… first time.🔥🔥🔥