- 3
- 28 297
Eli's 3DPD
เข้าร่วมเมื่อ 10 ม.ค. 2018
Hello! My name is Eli and I used to make a lot of origami videos and got really excited about making stuff, so much that a few years later I got my first 3D Printer! I also learned how to design and you can find a link to some of my models below this! I hope that you like my videos and have a good day!
Giant 3D Printed Lego Fish! // Time-lapse
I designed a very close replica of the cute Lego fish! I'm pretty sure this is the worlds largest, but if not, tell me, or if someone else made a bigger one. This video's a bit cringy, but I'm still getting used to making things with an editor. Other than that, enjoy!
The model that I designed and 3D Printed in this video: thangs.com/ElijahC/LegoFishEZPrint-12324
The model that I designed and 3D Printed in this video: thangs.com/ElijahC/LegoFishEZPrint-12324
มุมมอง: 188
วีดีโอ
How to make a keychain in Fusion 360!
มุมมอง 28K3 ปีที่แล้ว
A beginner tutorial on how to use Fusion 360 and you end up making a keychain! Here's a link to the models that I make that you can download for free: thangs.com/ElijahC
Thank you, exactly what I was looking for🎉
Thanks for this! I was having such a hard time figuring this out. Exactly what I needed. Great job!
Thank you so much! this was very helpful
You killed it, thank you
Thank you, you help me with Text offset 🙂
Thanks 👍
Thanks helped me alot, eventhough when i tried the lemon font the holes of the d were filled in when i extruded it.
Yeah, a lot of the fonts can act pretty goofy.
Thank you, I greatly appreciated you making this video. It saved my backside today lol
You're welcome! I'm glad it worked out
What font was that?
I think it was called Lemon? This was a long time ago and it seems like other people had trouble finding it. Hopefully this helps at all and good luck!
What is this printed with how do you get the final product
I believe it was printed with PLA from Matterhackers and after you finish the 3d model, you export it out of Fusion 360 and into a slicer like Cura. After you export it from the slicer, you put it into your printer and hit print! :) Hope this helped
This is a terrible, tutorial. you dont show what buttons your pushing, dont show what popups your editing. and you go so darn fast. very hard to keep up
Sorry if it wasn't useful for you; it seems like lots of other people can understand it, but thanks for the honest feedback anyways! If you want a super good tutorial, one good TH-cam channel to check out to learn Fusion is Maker's Muse.
same, i got most of it, but cannot figure out how to extrude at different heights.
This video has helped me a lot. Thank you
How do you make it where the bottom isn’t open
How do you send it to the printer
It depends on which printer you have, just look at a manual or something similar for your printer and it should tell you.
I mostly just needed to sort out how to do the ring attachement easier didn't see extruder bit had drop down that included join by defualt it was cut. But learning about using O to speed up making shapes in shapes really was nice. My first two auto cads were just snow globe bases for cheap ones that didn't have any, so I had to caliper it, then make two circles in exact spots. Would been faster to just hit O and extend it 5mm than then way I did it lol.
I can't do it, can you send me the file and I can just edit it in fusion and change the names?😔
I follwed the step , in the software lemon font is not available. kindly help me to download the fonts and to add it fusion.
Unfortunately, I do not know how to insert fonts into Fusion 360 and this video was made quite a while ago, so there's a good chance it's been removed as you said. Hopefully, you can find a font that will suit your needs and good luck!
This was awesome. Exactly what i was looking for. Thanks!
You made a video of your own self making something. I bet you nobody learned anything. RUBBISH1
Heck yeah budd, much love on the info for my old self!!!! 🤘
Awesome video! Could you tell this font's name?
Yeah, I think it's called Lemon
This was very useful thanks! :)
Well explained, can you tell me what the fonts called as I like it please
I'm pretty sure it's called Lemon
@@VerySus This Font not avaible in Fusion. how to use it
dude... Bro, I wanted to like this video, BUT you did a absolute TERRIBLE job at explaining what you were doing on the screen!!!! you were doing so much stuff that you didnt show us how to do on screen its pretty much useless as a tutorial.
Sorry! The screen recorder that I was using wouldn't show the pop-ups that tell you the measurements, and I didn't realize until like a month or so after I posted it, so I just decided to leave this video up. Hopefully you are able to find a better tutorial that's easier to follow along to!
Hi Eli I seem to be having issues with the fillet as it keeps on going the opposite way than i want it to go.
If you're making it in a 2D plane, sometimes you need to click on both sides of the edges to make sure it selects it correctly, or if it's in 3D maybe some of the settings on the side got mixed up. also, when you're messing with text, the geometry is really weird and sometimes it just doesn't work. I haven't really had any problems with fillets, but hopefully this helps!
I followed your step-by-step until about 4:47 in your video. I received errors that I can not get past. One of the problems is that your video does not show the individual windows and the exact selections that you are making. For instance, I have an extrude window which I assume that you have somewhere like a dual screen. I do not have a choice for a thickness but cannot see exactly what you are clicking on.
The recording software was being weird and it wouldn't show the extrusion windows, sorry! Sometimes messing with fonts can make fusion super buggy. I'm not an expert at troubleshooting or designing for that matter😂, so here are some of the videos that I learned how to design from, and hopefully they could help you out! Some really good channels that also might have some stuff to help you out are Maker's Muse, 3D Printing Nerd, and Make Anything. th-cam.com/video/qvrHuaHhqHI/w-d-xo.html th-cam.com/video/A5bc9c3S12g/w-d-xo.html
Hi Eli! Very good video! -Brooke
Thanks! 😉
Hi Eli, how do I extrude running writing? it keeps coming up with an error. Thank you!!
Running writing? What do you mean?
very helpful thanx
Thank yoooouu !!!
Very Helpful for a beginner. Thank you
Very helpful, I appreciate the video!
nice tuto, thanks
Can I get your phone number plz??