วีดีโอ

@@spartan612 I am not running this coolant for 6 months. I changed it after one.

Takes a bit of practice but there are alot of good youtube videos around if you need tips. I built my first custom loop couple of years ago. Bit frustrating but so much fun!!

@@gart12346 I would say medium difficulty, but a complicated bend can be frustrating. The hardest part is figuring out what bend will work for the two fittings. When I started, I stuck with 90° bends as much as possible. Use a silicone insert and have good dies to make the bends. I like the EK style dies. Make sure you have the silicone insert in the pipe so it doesn't crush. The material of the tubes can make things harder. I didn't like PETG, but it is easiest to bend. Watch some videos on TH-cam and give it a shot. Expect to waste some piping on bad bends. Correcting a bend can be close to impossible.

Thanks. It took quite a bit of work to get it right.

It is too low. I have to shoot through the supressor. I got pretty lucky with the first 3 shots.

love from irealnd

I wrapped it with matte white 3M automotive vinyl. It worked great. I just put the screws in through the vinyl.

It is 3M automotive vinyl wrap in matte white.

This is for an intel LGA1700, but they include a mount for AMD also. It would work.

No. This is the LGA1700 socket.

I used Krylon Fusion primer and matte white spray paint. Disassembled, painted and added ROG stickers.

Hello. I got some custom coolant mixed by Modmymods.com. It is specifically for mixed metal loops and I have not seen any corrosion. Whatever it is, it works.

@@bdbeckstrand I'm going to use liquid from EK (colored and solid). As far as I know, EK liquid contains various additives and corrosion inhibitors, I hope this will be enough. I'm from Russia, so this site is probably not available to me, but thank you for the answer.

@@bdbeckstrand I read an article where there was a message from EK, where they say that their connecting plate, which they released for the z690 formula, is not compatible with the water block on the VRM zone (which they also developed) this is MB. since the plate is copper, and the water block is aluminum. Asus replied on February 16 that they were dealing with this issue, it would take 12 weeks to develop a copper water block.

@@АнтонПротасовицкий Don't use EK's coolant. It is not designed for mixed metal. DP Ultra is the only commercial non-automotive coolant that can handle mixed aluminum and copper in loops. If you can't get that in Russia, Water-Wetter, Hy-Per Lube Super Coolant, Purple Ice, Zerex Racing Super Coolant, etc. can be added to distilled water to protect the metals.

​​@@АнтонПротасовицкий I now have a solution from ASUS. They are warranty replacing the old VRM waterblock with an all copper block.

Yes. It is the same socket:LGA1700

Thank you! Cheers! Here it is installed. th-cam.com/users/shortsjzbS-3wL8PQ?feature=share

Those are stickers that came with my motherboard.

​@Brian Beckstrand I was thinking the same thing and was like wait mine came with stickers too lol. Good work brother, did you spray paint or powder coat.

@@quique0884 I used Krylon Fusion primer and matte white for plastics. Powder coat requires too high of a temp for plastics to cure.

It depends on your CPU. Just turn XMP on in the bios and it should run full speed. You can overclock RAM a bit and tighten up the timings, but I have never done that.

Lian Li Strimmer cables. I got them from Amazon. You have to kind of watch them because thenprice fluctuates a lot. Don't pay more than $50 for them.

I like the tactile switches. So far I like the Holy Panda X switches the best. They have stiff springs.

About $60 for the motors, ESCs and electronics. The cage and flywheels are 3d printed, so filament cost if you have a printer. I need to add these items to my Etsy. Hit me up on FB DM if you need something printed.

@@bdbeckstrand yeah that would be great. I want to brushless my stryfe. What's your Etsy account? Do you live in Australia?

It is the "I hate the F&F blow-off sound." My DVs were leaking and I had the SSQV. A company makes a nice charge pipe for the N54 with a single BOV port. It was funny to blow off around people and see confused looks.

thats toll whale lol

+Brian Beckstrand Good idea. It would be cool if you made toothed concave metal flywheels to go with a custom metal flywheel cage that had the motors offset for rifling and a rifled stub on 9/16 inch brass for accuracy. This probably would be a tricky mod, though.