วีดีโอ

Amazing, thank you for this helpful guide!

Do u know if they sell the clips for the sensor line or do u have to replace the whole hose

I have the 10-circuit transfer switch in the outdoor enclosure. I mounted mine next to the meter can. I was originally going to follow an old water-heater control conduit via the can, but determined that this would not meet current code. I cut a hole in the back of the panel and used the supplied liquidtight to pass thru a thick brick wall to a large junction box immediately below the breaker panel. This provided ample room for wire routing and splicing those which wouldn't reach the desired breakers. I'm very pleased with the switch design, function, and layout.

You could put a 240 on/in that transfer switch if you used two of the 120s for the hot water heater, for exampl, no?

Someone tossed their oven on the curb for disposal pickup, but I grabbed it and removed usable parts. The switches from it are currently in my 2004 stainless steel microwave oven. I bought the oven way back then for about $40 since they said it was a display unit. It was not, but in truth half the key panel buttons were not working. I took it apart and a simple cleaning of the keyboard flex cable contacts and the flex cable connector on the control board fixed the problem. Later on, the turntable motor was not working, but one drop of glue fixed that by gluing the donut shaped magnet to the first gear that fits inside it, all to fix the new slippage problem.

Thoughts on not using crush washer and just the cheapie one that comes with an oil drain plug from Autozone

Who has only 10 screwdrivers?

Can a Reliance Controls manual transfer switch be wired as a sub-panel?

How deep is your drawer? I really like your system, but I have one set of sockets that's taller than my drawer.

GOAT!

This just saved me some major grief. It’s a big mystery re: why Thule doesn’t include similar instructions or guidance on in the included instructions for the rack. It only shows that the factory fitted strap handles up to 3” wheels. There’s a lot of confusion online about whether Thule XXL straps are required for fat bikes, and if those straps even work with the Thule T2 Pro XTR since they seem to be designed for the Epos.

Thanks ... I will be changing more ne on Saturday!

Which of the 3 is responsible for turning the microwave on?

Is this the 9th gen lx or ex?

i saved the box for my wo3386 inverter gen GLG !

This worked for 2019 Santa Fe model also. Thank you very much for posting

JOHN I sent you a very detailed email on this video. Please read it and get back to me Best Regards

I bought the same cassette and bought the tools to remove the cassette from amazon. When I was removing the existing cassette, I thought I bought the wrong tool, since I was putting the tool bit on the caliper side, found your video and I was doing it wrong. Was able to remove and install within no time. Thank you!

Thanks - I would not have gotten the part about the clips in getting the flap off.

Thank you for the video sir

great job, simply explained, etc. While my Samsung 704SFS is still rotating and "running as normal", it's the lack of heat that makes me wonder if it is a switch or a heating element. But this is certainly a way to test before doing more. Thanks!

Great video helped a ton. On my model there was an additional screw holding the control panel on. It was tricky to find because it was inside the top right of the panel casing and could only be accessed from above. The wire connectors on the switches also had tabs that need to be pressed to detatch.

Update: This trimmer head has been nothing but problems. It builds of heat which causes the trimmer line to melt and stick. This sticking stop the auto bump feed from working.

You just saved me from buying a new microwave. thank you.

Thanks for the wonderful video. I fix my Kenmore microwave control panel.

thanks

Thanks man. This video helped me today.

Can you hook up a 4 prong inlet box to this panel?

Thanks, worked perfect for the fix

Thank you sir

Some thing that is sealed like a bearing can not get grease in them like a bottle of pop it has a seal no air can get in it that's why it has a seal

Where are we supposed to connect the red/hot wire too ?

the thermostat shows the wrong temp in the room. can I reset to factory?

I saw this video two days ago…followed your instructions and just fixed my microwave!!! Thank you sir!!!😊

This radio can't use 12 volt battery?

Thank you so much bro for uploading your video. It was a huge help! 😁

Hi, I wanted to know if you’re able to use the steering controls to navigate through your imid screen and controls such as maintenance reminder?

Nice job! Well organized and put together. Thank you!

I have seen numerous Subaru oil change videos and noticed that on some of them, after removing oil filter the tray virtually has no oil in it, other times when filter is removed there can be quiet of bit of oil left in that tray. I wonder why is that?

Are you still available to answer questions on this older post?

Get a One Up V3. It’s much better. I’ve had both.

I'm 69 n my older micro chief microwave sits in my bedroom waiting for my undivided attention I'm guessing 1 of them 3 switches just not sure

Thanks for this video. This helped me troubleshoot and correct my problem

EXCELLENT video

What if that don't work

Thanks 🙏

Excelentes los forros para los pisos , donde se consiguen?

My GE model PEB7227ANDD stays running when i close the door and stops when i open it .. advise please

My main panel is on the outside of my garage, would I be able to have a transfer switch installed on the interior wall of the garage and have the wire ran through the wall to the main panel? I was looking at a 50A transfer switch that has the generator input on the front of the trans switch.

I had leak at the “wet end “seal and the pump shaft was pitted causing that so I ended up getting a entire pump/wet end for the Hot Springs Accolade 2005 but I’m getting a drip from the collar compression fitting on the horizontal side as I was filling it…The O Rings on both are new and I added some silicone and let it sit overnight before attempting to fill it again but it started dripping again… as far as I know the pump is aligned okay and no cracks on the threading collar ..at least none I can see at this point so it’s frustrating to say the least …more silicone?