![OneUp Components](/img/default-banner.jpg)
- 69
- 1 616 627
OneUp Components
เข้าร่วมเมื่อ 10 ก.ย. 2013
Service - Rear Hub Full Rebuild
Head to our website for the step-by-step, written instructions - www.oneupcomponents.com/blogs/
This service should take about 20 minutes and should be completed when your bearings start to feel rough and/or develop any play in them.
Users are encouraged to perform regular maintenance earlier if required. If something seems rough or unusual after servicing please stop, disassemble the post, and double check your work. If nothing stands out please contact info@oneupcomponents.com to avoid additional damage to the post.
Tools Needed
-OneUp hub drift kit or standard drift kit with 6902 drifts.
-Mallet
-Waterproof Grease (PL-1000 or better)
-Freehub grease (supplied with hub)
-Lint free cloths
-25 Torx key
-Cassette tool w/o axle guide
-Vice
Please note: If you do not have access to a vice, you still can complete this service. Just note that both hammering out & pressing in the bearings will be less controlled without the vice.
This service should take about 20 minutes and should be completed when your bearings start to feel rough and/or develop any play in them.
Users are encouraged to perform regular maintenance earlier if required. If something seems rough or unusual after servicing please stop, disassemble the post, and double check your work. If nothing stands out please contact info@oneupcomponents.com to avoid additional damage to the post.
Tools Needed
-OneUp hub drift kit or standard drift kit with 6902 drifts.
-Mallet
-Waterproof Grease (PL-1000 or better)
-Freehub grease (supplied with hub)
-Lint free cloths
-25 Torx key
-Cassette tool w/o axle guide
-Vice
Please note: If you do not have access to a vice, you still can complete this service. Just note that both hammering out & pressing in the bearings will be less controlled without the vice.
มุมมอง: 2 844
วีดีโอ
Listen to the sound of the NEW OneUp Hubs
มุมมอง 13K28 วันที่ผ่านมา
Lightweight, fully sealed, durable, hubs with high quality bearings. Available in a range of colours. We think our hubs have the best combination of performance, durability and price. These are the hubs we want on our bikes. OneUp Hubs are the new benchmark for light, durable hubs at a fair price. Check them out here - www.oneupcomponents.com/collections/hubs
NEW OneUp Components Hubs
มุมมอง 65K28 วันที่ผ่านมา
OneUp Components Hubs. Lightweight, fully sealed, durable, hubs with high quality bearings. Available in a range of colours. We think our hubs have the best combination of performance, durability and price. These are the hubs we want on our bikes. Our simple design has fewer parts, this reduces weight and improves reliability. Our hubs use a fully machined 7075 aluminum body with integrated dri...
How the OneUp Components EDC Tool system works.
มุมมอง 1.9K2 หลายเดือนก่อน
Whether you're going out for a quick lunch ride or setting off on a longer adventure, EDC means you have all the tools that you need to keep your bike running smoothly. The 20-function EDC Tool is the heart of the EDC system. There are five ways to carry EDC Tools on your bike, including two sizes of pump and three steer tube storage options. This video shows all the options and their functiona...
What makes OneUp Handlebars more comfortable?
มุมมอง 4.9K3 หลายเดือนก่อน
All of our handlebars use a patented oval shape to increase vertical compliance, actively reducing vibration and increasing comfort. All without compromising stiffness or control. More compliance means less hand fatigue. Less arm pump, and less wrist pain. So you can ride harder for longer. OneUp Handlebars - www.oneupcomponents.com/collections/handlebars TIMESTAMPS 00:00 Intro 00:25 Compliance...
OneUp Components x Santa Cruz Syndicate
มุมมอง 3.5K4 หลายเดือนก่อน
OneUp Components x Santa Cruz Syndicate
Service - V3 Dropper Post Full Rebuild
มุมมอง 2.4K5 หลายเดือนก่อน
Service - V3 Dropper Post Full Rebuild
Service - V3 Dropper Post Quick Grease
มุมมอง 2.9K6 หลายเดือนก่อน
Service - V3 Dropper Post Quick Grease
An inside look at the OneUp V3 Dropper Post
มุมมอง 3.9K6 หลายเดือนก่อน
An inside look at the OneUp V3 Dropper Post
Service - V3 Dropper Travel Pin Adjustment
มุมมอง 4.4K6 หลายเดือนก่อน
Service - V3 Dropper Travel Pin Adjustment
Why do you get more drop with a OneUp Dropper Post?
มุมมอง 3.2K9 หลายเดือนก่อน
Why do you get more drop with a OneUp Dropper Post?
How to know what dropper post fits your bike
มุมมอง 15K10 หลายเดือนก่อน
How to know what dropper post fits your bike
BIG WILD. A Squamish Trail Building Project
มุมมอง 26K3 ปีที่แล้ว
BIG WILD. A Squamish Trail Building Project
Can a Pro Mountain Biker pass 6 riders on their local trail?
มุมมอง 412K4 ปีที่แล้ว
Can a Pro Mountain Biker pass 6 riders on their local trail?
Rad 👏👏👏
Awesome…I like the music…sounds like Elder …highly recommended if you don’t know them 👍🏼
Beautiful shots
Oneup and microshift changing the game. I basically only build my bikes with parts from these 2 companies. Hate the corporate greed and the elitism in the cycling world. Your 14k bike cant do anything my 500$ fully custom build from an old mtb frame can do. Converted to 1by and going to build 2 sets of wheels with these hubs
Just ordered a set of purple hubs for my enduro. LFG.
Any plans for upgrade kits? To get a 54+ engagement?
Yoooooo 🔥🔥🔥🔥
Is there a way to remove these pins without disassembly of the dropper?
The only detail that worries me is the drive spline cut directly into the hub shell. There's a very good reason just about everyone else has a steel spline here. Aluminium doesn't take high surface pressures and having other parts sliding on it anything like as well. If the hub body is also 7075 (The freehub is 7075 according to the video, and it absolutely needs to be as anything softer will get chewed in no time by the cassette under any half way strong rider) and it's hard anodised it will still last longer than most people will ever need though. Otherwise the design looks very sensible. I'll be looking at these if the Pro4 Hopes I've already got ever give trouble that's not immediately covered on their warranty.
Its hard to imagine a dropper better than the OneUp V2. But Im gonna buy the V3 and find out! 🕵️♂️
Bought a new Fox Transfer in 240mm and it’s MASSIVE! Going back to a OneUp 210mm. The new Wolf Tooth Resolve Rev2 is slightly shorter in 242mm but waaaay too expensive and still too big I think.
2:59 Kamikaze Drone
Again a hub manufacturer without poison green hubs but The workmanship looks good
Will there be a lime green version of them soon?
What about 135. Quick release
Could you make handlebars with a higher rise of 55-75mm, for taller people ;) ?
The best rear hubs are fixed, linked by a belt to a gearbox. Thanks anyway.
Is this like the best advert of all time!! Wow don’t even need new hubs but want to get my hands on these.
Can I use these on a bike that was made for quick release? or how would I use the axel? What would it thread into?
Man if they’re anywhere near as bad as my One Up pedals I’ll be truly impressed. Never had a pair as poor quality as these
Honestly was about to skip until you got to the torque specs & wrenches. Just captivating 💯👍🏽
Whoooooh! Can’t wait to get mine in the mail this week!!!👏🏽👏🏽👏🏽👏🏽👏🏽
Where can you buy these from 😊
Do you have 141mm hubs, for Trek XCaliber?
My wishes: 1 Polished option 2 Quiet engagement And I’m in heaven!! Overall Incredible!!!
will we be getting new axle sizes in the near future? thats definitely a barrier for me
Dunno why but I reaaaally don’t like it, the high speed hum really gets me. Cool though!
157x when?
Give us a center lock version and i would gladly grab a set. It happens all the time, companies make an almost perfect product and then choose something stupid. You guy’s are a big enough company to make both 6 bolt and center lock…c’mon meow.
No
Extra marks for the Super Troopers reference, but I'd choose 6 bolt over center lock every time because I hate the way play appears between the disk and the centerlock spline, which causes the lockring to unscrew over time, if your riding loads the brakes in both directions.
What’s the rubber o ring for that came with the free hub body?
Are the axles anodised? As non anodised axles are too soft of a surface for the bearing to be pressed against?
You had me at well priced!
I just looked at the pricing and you weren't kidding!
Nice!
"affordable" It costs 220$ :))
A ratched alone which is just a piece of metal if it goes bad, costs 78$. Lmao. A 5$ aliexpress cartridge bearing costs 22$ to buy from oneup
lol who needs grease in their hub?
Looks great. To bad they are out of stock 🥶 when do the boost hubset, 32h Sram xd body come in stock again? Any color 😀
Now I just need a set laced to Spank 350 rims!!
Take my money
Bring back and keep making the V2 dropper pleaseeeee, air valve, price and quality sold them, not the weight
44t engagement. Weak!
Wow that is the most simple rear hub rebuild, and I don't have bearing press tool going old school.
0:09 Where do I find "Gease" and "Vice." I kid, but you might want to have Marketing run spelling and usage checks before publishing. Love love love the service guide being publicly available on release, however.
Yeah a couple typos slipped through haha.
For everywhere outside the US, 'vice' is the correct spelling.
Это у него такой накат?
Where do you get these??
Will the be an option for Non boost?
No Center lock available? And can convert the end caps 148 Boost to 141 Boost qr ?
Would scare the crap out of any hiker on the trail. 10/10
I sure hope you made a lot of those cause I will be ordering some sooner then later! Your products service are awesome. Super stoked on this !!!❤
I love u one up 🫂 never forget that 💋
I didn't think I wanted to see this, but I trusted, and the algorithm was right. 👍 These hubs cost more than my bike--I'll never buy them, and they'd be wasted on me, but it's nice to know what makes a good hub. I've levelled up my 'bike nerd' skill in 3 min.