วีดีโอ

Thanks, this video was very helpful.

I finally got mine to work. How you ask? I just flipped the battery around in the transmitter and boom. It worked. Silly thing I know but, it happens all the time. Thank you for making me think! :-)

Does not work

watching at 2x

hello friend , my one blade charger light stay green (doesn't blinking) , the one blade itself has no light at all , how will i know when its fully charged ? 😔

Lewis Deborah Brown Lisa Walker Anthony

Sony .WM. GX90 .Walkman. Wonderful. But. Sad. ..story. inside

I had one back in 1982. Fantastic radio cassette. I use to connect it to my music centre and record tracks & parts of tapes. I would gladly pay £250 for it today if it is in full working order with antenna and blue case.❤❤ GREAT JOB. GREAT VIDEO.

Looks like there are dozens of different packages in the market. Would you know which one is fake? You won't. Conclusion: If you try to make a bargain and buy it online in an online shop etc., you never know what you get. Same applies for shampoos, oils etc.

You aren’t showing how to deep clean it, your only showing how to take it apart, how does one clean it, I have so many hairs stuck. It’s been like that for 10 years plus. Do say use a brush, bc that doesn’t work, I’ll take it apart but than what?

First solution worked immediately, and it isn't even the same remote or product that you have 😂 Thank you ❤

Membosankan dan tak ada inti 🙄

Thank you, I won’t buy it.

Watchable at 1.5x speed!

Yeah it needs a service. Use to repair all this stuff back in the day. Needs recapping and the belts might need replacing and you might find some gears had dry oil on them or cracked. That’s why I say it needs a service. Repaired all this stuff before. I do electronics and will need the head realigned and wow and flutter sorted out too.

So portable for this time

I have the same problem but I can change the dB in the app when i connect the receiver to my phone via USB c to USB c.

Great video! I must build one asap! What was the brand on the expensive selfi stick?

Lopez Michelle Johnson William Johnson Carol

Hall Karen Harris Mary Garcia Lisa

It works thank you

I like the victorinox cases, I've had the large champ one since 2008 and it's still pristine (as is the knife). The only problem I have with the mini champ one is the fact that it doesn't double as a keyring, so I'll be looking for one that you can put the mini in but is also a keyring. Still, that's a lovely little case.

THANKS

Where do I get the battery?

Thompson Karen Davis Kenneth Martinez Michelle

Miller Margaret Lopez Mark Hernandez Jason

Thank you a lot for this!❤

THANK YOU!! 🎉

Hi can I use it to cut my hair?

Hi, thanks for this video. i have seen your video on the Sony SRS T70 as well. which one would you say is superior of the 2 & why?

I appreciate you saving me time; the first attempt went perfectly.

Thanks man

Hi could you help me I just need to change the belt, do you have a video for this. I can't get the mechanical circuit board off. Thanks in advance.

How big is the belt's size?

Good morning, I have to change the belt, but I can't do the step of separating the printed circuit board from the mechanics, it seems that the printed circuit board with the mechanics is a single piece, could you kindly give me a hand to separate the printed circuit board, also do you have a drawing of how to place the belt. Thank you very much.

Perfect. Thank you! I had to repeat the process about 3-4 times before the colors were ALL back to the designated color coded buttons but that only took about 30-45 seconds to do and now its fixed. Bravo, sir!

Hi, how can I connect the Bluetooth inside my handphone apps how to download

I don't know why samsung decides to sell chargers separately, now fakes all over nd hard to tell.

thank you I have the one on the right side

The clicking noise is annoying but at least the clicks are quieter than as a lot of the manual cassette players

You farted 😂

Thank you so much!!!! My puppy chewed up my remote and got the new one to pair with this method:)

Thank you very much for this very detailled presentation. I own 1 for about a year and now getting into airfrying. You maide it very easy for me.

It is a very nice cassette player with amainzing features. Do you know how can i deactivate the beep since every time when i press down any button sound a strong beep, specially when the tape have finished a face and go back in reverse?

Thanks a lot, I followed this and was able to restore and keep using the JBL Creature. However, I wasn't super happy with the sound quality of the new speakers, so I thought to try to restore the old ones, mostly for fun. And it worked pretty good, with some caveats. You need basically: a 3D printer, 0,6 mm EVA foam sheet, exacto knife, some glue, and a soldering iron. First, you need to remove carefully the deteriorated foam with any thin tool or even a toothpick. There are 2 foam rings, the external one surronding the metal center, and then another joining the central coil to the middle of the speaker encasement. Remove both. You'll see now two wires coming from the central coil cylinder to the terminals. You need first to unsolder them from the terminal, using a thin tip. Then, they cross the encasement through a couple of small cuts on it; and they are filled with glue. You need to remove the glue, which can be a bit difficult; I used a sharp cutter (you'll damage the blade so you can use an old one) and also a Dremel with a very thin drilling bit (this makes it easier). Do not cut the wires instead! You'll have problems if you do that, believe me. Once you free the wires, you'll be able to extract the central coil cylinder. Take care not to deform it so it keeps a perfect round shape. Clean carefully any remains of foam and glue on the encasement, I used acetone and cotton swabs for that. You need also to clean the coil cylinder as well, but using acetone here is dangerous (you'll likely remove the coil varnish), so I used the exacto knife very carefully to remove the remains of foam and sticky glue. It doesn't need to be perfect, just remove as much as you can without risk. To manipulate the coil cylinder without deforming it I 3D-printed a cylindrical piece that fits perfectly into the coil (but not all the way; the metal cap is easily deformed as well). Then, to build the new foam rings, I 3D-printed molds for both foam rings, so I can get the bumpy thorus shape. I used these molds to shape a couple of EVA foam pieces using a heat gun. Then you need to cut those pieces so they get the appropriate circular shape and also the central hole for the central coil cylinder. Once you have both foam rings, put the coil cylinder through them so both rings are at the appropriate height, which you can easily see because you will have still the mark of the original glue that held the original foam rings. Apply glue carefully to keep the new rings in place. Once it dries, you are ready to put back the coil cylinder into the encasement. Apply glue (not an instant one) to the surfaces of the encasement that will have contact with the foam rings; and also to the cuts for the wires. Introduce carefully the cylinder with the foam rings into the encasement, ensuring it is perfectly centered with the magnet. The wires also need to be inserted into the encasement cuts (beware of polarity; positive terminal and wire are painted in red) and soldered back to the terminal. Do not stretch out them, do must not be tense or the coil won't be able to vibrate. For the innermost ring, you may need to use a toothpick or similar to press it against the glue, as the encasement is partially closed there. Let everything dry, and then you can put back the speaker into the satellite housing. It's a bit complicated I know: this is just in case you want to try and entertain yourself. For me, one of the satellites now sound a bit lower than the other. I suspect it is because for that one, I just cut the wires, which complicate everything (and you still need to free them from the encasement then solder them back togheter, so no gain doing that). That made the entire operation of putting back the coil into the encasement difficult, and I think possibly something is too tight and the coil cannot vibrate as freely as it should (or maybe the resoldered wires doesn't work so well). Probably I'll try to remade it, in the meantime I just adjust the balance. But the other one is sounding pretty awesome to me. Can't tell how much this will last, but I'm happy with the result so far.

Had the same problem, returning them sadly

Can you provide the sourcing for the replacement battery? Ive had great difficulty in finding a replacement. Even looked at the vendor on eBay you used. Help.

awesome 😍

Well now tell me how I can stop it. My car now looks like an emergency vehicle Everytime I start it after this "reset". Even the turn signals tail lights and market lights are flashing.

Thanks for the tips and repair video.