Stress Tech
Stress Tech
  • 41
  • 114 129
Creality Ender 5 Plus Stock Fan VS Genuine Sunon Maglev KDE2404PFVX High Static Pressure Fan NO FAKE
Creality Ender 5 Plus 3D Printer Stock Fan (40x40x10mm) VS Sunon Maglev KDE2404PFVX High Static Pressure Fan (40x40x10mm).
In this video; I am showing you how the Sunon Maglev high static pressure fan changed the way how my 3D prints look. I am using the stock Creality Ender 5 Plus red aluminium hot end with a 0.4mm Micro-Swiss A2 MK8 hardened nozzle and Capricorn XS Ultra Low Friction PTFE Bowden tube. I am also an owner of an "all metal" Micro-Swiss hotend. I am not a fan of the Micro-swiss hot end, as the heat sink is made from a low thermal conductive metal. The Creality Ender 5 heat sink, is made from aluminium (and has more fins), which is a better thermal conductor than the metal used in the Micro-Swiss hotend. The filament that enters into Creality aluminium heat sink, stays more fresh before it is melted. Also in my opinion, abrasive filaments (like Glow-In-The-Dark & Carbon Fibre) scratch the inside of the Micro-Swiss heat sink. When the inside of the metal heat sink is worn down, the filament no longer slides well to the heat break, then in to the nozzle. The PTFE Bowden design on the Creality aluminium hot end has less friction than a worn out Micro-swiss hotend that has been tortured by abrasive filaments. I would only use the all metal Micro-swiss hot end, if I'm printing over 290c, as the Capricorn XS Ultra Low Friction PTFE Bowden tube can only handle temperatures up to 300c.
I noticed a lot of 3D print users replace their stock fans with a more quieter fan. I also noticed that the majority of them are replaced by high air flow fans and not with high static pressure fans. High air flow fans create problems like clogs, blockages, filament colour changes and the rigidity of the filament before it is melted.
In this video, I'm comparing two, already printed 3D Benchy Boats using the same filament, same Cura settings, and same hardware; except for the 40x40x10mm cooling fan being changed to the Sunon Maglev KDE2404PFVX. The difference is like night and day. The Sunon Maglev fan is louder, but the performance is astonishing. If you want the best performing (not the quietest) 24v 40x40x10mm high static pressure fan, then the Sunon Maglev KDE2404PFVX is the best choice IMHO. It fits perfectly into the Ender 5 Plus. You only need to replace the stock fan screws, with slightly longer ones. I say; 2-3mm longer than stock.
WARNING!
!!PLEASE BEWARE OF FAKE SUNON MAGLEV FANS!!
Copies are everywhere...
Finding a genuine Sunon Maglev KDE2404PFVX is like finding a 50+ carat tanzanite diamond now a days. These fans are now rare, as they are discontinued. The fake ones on sale at Ebay are much louder, have less static pressure and have a 3rd solder point (or wire) to connect the fan reading sensor too. The genuine Sunon Maglev KDE2404PFVX only has 2 hidden solder points and 2 wires connecting to them solder points. Them two wires are red and black and feel way more thicker and are not twisted together. Notice how thick the fan plug is, in this video too. Also the label on the fakes are very different. Use mine as a comparison. Notice my part number is placed differently to the fakes ones. Original genuine Sunon Maglev KDE2404PFVX fans will cost around £45 a piece, Not £7 from Ebay! Video coming soon comparing the two.
Cura retraction settings:
Retraction distance: 6.5mm
Retraction speed: 25mm
Retraction retract speed: 30mm
Retraction prime speed: 25mm
Combing Mode: Off
Z-Hop when retracted: On
Z-Hop Height: 0.4mm
3D Benchy (Both) Boats settings:
Filament: Extrudr Steampunk Copper 1.75mm PLA filament
Nozzle: 0.4mm Micro-swiss Hardened steel A2 MK8 Nozzle
Layer height: 0.2mm
Infill density: 20%
Infill pattern: Cubic
Nozzle temperature (Printing temperature): 215c
(Glass) Build plate temperature: 60c
Print Speed: 80mm/s
Fan speed (print cooling): 100%
Build plate adhesion type: Brim
Hotend: Creality Ender stock complete hot end
Bowden Tube: Capricorn XS Ultra Low Friction PTFE Bowden tube
Sunon Maglev KDE2404PFVX full fan specification :
Fan Size: 40mmx40mmx10mm
Rated Voltage: 24 Volts (VDC)
Operating voltage range: 8~27.6 VDC
Rated speed: 8500 RPM
Air delivery flow: 9.5 CFM / Max 11 CFM
Static Pressure: 0.29 inch-H2O or 7.36mm-H2O or 7.3 mmAq
Rated power: 1.9 Watts
Noise level: 39 dB(A) / Max 43 dB(A)
Direction of rotation: Counter-clockwise
Weight: 17g
Sorry for the poor video and sound recording quality. It was done using a Samsung Beam 2 mobile phone.
มุมมอง: 1 116

วีดีโอ

Iwatsu SS-5711 Oscilloscope Score From RCA Video Plug
มุมมอง 7034 ปีที่แล้ว
Iwatsu SS-5711 Oscilloscope scoring. Only uploaded this video to show the strength of the CRT. Everything is sill intact for it's age. The noise in the background is mostly from my computers and 3D printers in operation.
Deus Ex (year 2000 game) Covid-19 & Coronavirus Conspiracies About The Grey Death & Ambrosia Vaccine
มุมมอง 8254 ปีที่แล้ว
An old video game that launched at the year 2000. It mentions a virus called the Grey Death that ruins world economy. Only the Ambrosia vaccine that the government secretly hide, can cure the virus. This is the main intro of the game. Bandicam recording software used to record this video at 1028x768 @ 60fps
Two Bullfinch Birds Fly Away From A Cherry Tree
มุมมอง 3916 ปีที่แล้ว
Video taken on 21st Of January 2017 Two bullfinches spend time on the Cherry tree on my back garden in Rotherham. The video only shows you them flying away at 0:31 Sorry for the quality.
Grey Wagtail In A Backgarden In Rotherham
มุมมอง 376 ปีที่แล้ว
Grey Wagtail with a golden yellow tail in Rotherham on 17th of February. This is an urban loud area. This bird keeps coming back :-) Best view starts @2:17 This video was recorded at 17th of February 2018 in England, Rotherham. Sorry for the poor quality of this video. This was recorded through a dirty window using a Galaxy S5 phone. I also did not have enough time to prepare.
X-maxx 8s Quick Speed Run Flyby! Castle XL2 with 910Kv Motor...
มุมมอง 2546 ปีที่แล้ว
Small speed run with 50% throttle, 50% reverse and 100% braking. Recorded using a Samsung Galaxy S5 phone. Sorry for the poor quality. Pro-Line MX43 and Pro-loc wheels, Castle Mamba XL2 8s with computer GPS, Painted body, 2x Turnigy graphene 4s 6000mAh 65c-130c batteries (with battery compartment extension rails), TORO Beast X524 910KV brushless motor, Area Alloy front & rear knuckle arms & C-h...
Hubsan H501 S Low Hover Hold Test
มุมมอง 766 ปีที่แล้ว
A little drone test that I decided to record... Hubsan H501s hovering really low on a windy day after new motors installed.
Traxxas RC Truck Car A Big 120mm Delta Cooling PWM Fan mod. Walk Around.
มุมมอง 3086 ปีที่แล้ว
This was just a quick test to see if the 6000RPM fan mod is in operation and safe, before I build a battery compartment to house a single 11.1v 3000MAh lipo battery. This mod is only for speed runs or hot summers. Using a 12v Delta 12038 120mm x 38mm 6000RPM Fan (PFC1212DE) and a Noctua PWM fan controller, powered by a single 4S 14.8V 5500mAh 35C battery, the fan can operate on full speed for 8...
Traxxas X-Maxx 8s, Castle Mamba XL2, TORO Beast X524, Full Alloy Conversion!
มุมมอง 6956 ปีที่แล้ว
Traxxas X-Maxx 8s, Castle Mamba XL2, TORO Beast X524, Full Alloy Conversion!
Asus Rog Centurion 7.1 Microphone Fix With Best Mic Settings
มุมมอง 21K6 ปีที่แล้ว
Asus Rog Centurion 7.1 Microphone Fix With Best Mic Settings
Deus Ex Mankind Divided DirectX 12 1080P And 1440P Benchmarks
มุมมอง 2626 ปีที่แล้ว
Deus Ex Mankind Divided DirectX 12 1080P And 1440P Benchmarks
Borderless Deus Ex: MD 7700K@5GHz 1080 GTX SLI@2100Mhz & 1375MHz GPU Memory
มุมมอง 1676 ปีที่แล้ว
Borderless Deus Ex: MD 7700K@5GHz 1080 GTX SLI@2100Mhz & 1375MHz GPU Memory
Overclocked P870KM Witcher 3 Gameplay (Full Fans) 7700K@4.9GHz & 1080 SLI@2.1GHz
มุมมอง 2156 ปีที่แล้ว
Overclocked P870KM Witcher 3 Gameplay (Full Fans) 7700K@4.9GHz & 1080 SLI@2.1GHz
illuminati Conspiracy Mentioned In Deus Ex Invisible War PC Steam Video Game
มุมมอง 1396 ปีที่แล้ว
illuminati Conspiracy Mentioned In Deus Ex Invisible War PC Steam Video Game
AlphaCool HDX M.2 SSD M01 Passive Heat Sink Cooler CrystalDiskMark Live Test
มุมมอง 2.2K6 ปีที่แล้ว
AlphaCool HDX M.2 SSD M01 Passive Heat Sink Cooler CrystalDiskMark Live Test
P870KM1-G Witcher 3 Gameplay Temps (Full Fans) Silver CPU Lid
มุมมอง 3886 ปีที่แล้ว
P870KM1-G Witcher 3 Gameplay Temps (Full Fans) Silver CPU Lid
7700K Custom Silver IHS Lid Test On delid P870KM1-G Clevo (Full Fans)
มุมมอง 1.3K6 ปีที่แล้ว
7700K Custom Silver IHS Lid Test On delid P870KM1-G Clevo (Full Fans)
Default Settings Loaded In A P870KM1-G Stock BIOS
มุมมอง 3766 ปีที่แล้ว
Default Settings Loaded In A P870KM1-G Stock BIOS
7700K Custom Silver IHS Lid Playing Battlefield Hardline For Testing Temps (Auto Fans)
มุมมอง 9846 ปีที่แล้ว
7700K Custom Silver IHS Lid Playing Battlefield Hardline For Testing Temps (Auto Fans)
SUNON UB5U3-700 Mini Fan test 2-6V DC 30 x 30 x 3mm (mighty)
มุมมอง 1.8K6 ปีที่แล้ว
SUNON UB5U3-700 Mini Fan test 2-6V DC 30 x 30 x 3mm (mighty)
Triple XB271HU Metro Last Light Redux Benchmark 7680 x 1440 Nvidia Surround 8K
มุมมอง 3776 ปีที่แล้ว
Triple XB271HU Metro Last Light Redux Benchmark 7680 x 1440 Nvidia Surround 8K
Sager NP9876 Metro Last Light Redux Sager 1440P FULL SETTINGS
มุมมอง 1196 ปีที่แล้ว
Sager NP9876 Metro Last Light Redux Sager 1440P FULL SETTINGS
Sager NP9876 Metro Last Light Redux Sager 1080P FULL SETTINGS
มุมมอง 916 ปีที่แล้ว
Sager NP9876 Metro Last Light Redux Sager 1080P FULL SETTINGS
Rockefeller & Rothschild Family In A Old PC Game, Deus Ex (2000)
มุมมอง 4.4K7 ปีที่แล้ว
Rockefeller & Rothschild Family In A Old PC Game, Deus Ex (2000)
Acer Predators Surround XB271HU-A 7680x1440 Deus Ex Mankind Divided 8K
มุมมอง 1.6K7 ปีที่แล้ว
Acer Predators Surround XB271HU-A 7680x1440 Deus Ex Mankind Divided 8K
Postal 2 Killing Spree II HD 18+ XXX
มุมมอง 9687 ปีที่แล้ว
Postal 2 Killing Spree II HD 18 XXX
Undervolting i7 7700k CPU Maximum Stress Test Temperatures On A Clevo Laptop Notebook
มุมมอง 7K7 ปีที่แล้ว
Undervolting i7 7700k CPU Maximum Stress Test Temperatures On A Clevo Laptop Notebook
P870KM1-G Doom 200+FPS Ultra With Laptop Temps & Statistics!
มุมมอง 9587 ปีที่แล้ว
P870KM1-G Doom 200 FPS Ultra With Laptop Temps & Statistics!
Samsung 840 EVO Boot Time On A HP Pavilion G6 Laptop Using Windows 10 Pro
มุมมอง 1917 ปีที่แล้ว
Samsung 840 EVO Boot Time On A HP Pavilion G6 Laptop Using Windows 10 Pro
Deus Ex Origin EON17-SLX MSAA 8X Ultra Benchmark 7700K GTX 1080 SLI 1080P P870KM1-G Laptop
มุมมอง 5767 ปีที่แล้ว
Deus Ex Origin EON17-SLX MSAA 8X Ultra Benchmark 7700K GTX 1080 SLI 1080P P870KM1-G Laptop

ความคิดเห็น

  • @jarnet8525
    @jarnet8525 2 ปีที่แล้ว

    Please help me, I can't adjust the sound so that I can hear the steps in the games (Escape from Tarkov) I bought headphones, but I don't understand how to properly adjust them to the steps.. and you can't find guides anywhere :с

  • @christinarevell9744
    @christinarevell9744 2 ปีที่แล้ว

    Watched several times and cant see them fly away but I van see one in the tree after 31 secs

  • @TRACEROOTGPS
    @TRACEROOTGPS 3 ปีที่แล้ว

    Amazing 👍

  • @fruitycoconut
    @fruitycoconut 3 ปีที่แล้ว

    Funny how he's slowing down when the rc is near that porsche or that jag 😂😉

  • @ansonang7810
    @ansonang7810 3 ปีที่แล้ว

    whats the performance difference?

  • @Marekkitos
    @Marekkitos 3 ปีที่แล้ว

    You TDP is low max 45W. My TDP in 73W temperature 60 - 65°C.

    • @YouWillTunnel
      @YouWillTunnel 3 ปีที่แล้ว

      It's called "silicon lottery". That particular CPU has a good under-volt. You may be using 73W, but he's only using 45w max and has the same performance or clock speed as you.

  • @thatGRprick
    @thatGRprick 3 ปีที่แล้ว

    Lol yeah right no different then my x maxx 800kv with locked center diff. You’ve got way too much front wheel spin.

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      Thank you for commenting "Lol yeah right no different then my x maxx 800kv with locked center diff. You’ve got way too much front wheel spin." : The front wheels spins because it is going up hill on a rear soft suspension setup. When the truck comes back down from the top of the road, the rear wheels lift the truck up. 800kv with locked diffs vs TORO Beast X524 910KV brushless motor with a Castle Mamba XL2 esc and 20 million centre diff weight are two different truck...

  • @justinyuhas410
    @justinyuhas410 3 ปีที่แล้ว

    I just got the maxx

  • @zenify-_-69
    @zenify-_-69 3 ปีที่แล้ว

    That is not sound good that center diff no stop it tighten it You're going to ruin your center diff

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      It had 20 million stock weight on the centre diff. With the upgrades, it now needs ear plugs. The truck being 15kg+ does not help too.

  • @thatonerckid1696
    @thatonerckid1696 3 ปีที่แล้ว

    My Baja Rey 3s could beat that

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      Yes, it's a different size/scale.

  • @ukmitch86
    @ukmitch86 3 ปีที่แล้ว

    What do people not like about the spec?

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      I think it's because the truck weighs over 15kg from the alloy upgraded parts or I'm using 20 mil centre diff oil or the front wheels are spinning when it is going up hill on a rear soft suspension setup, that was fixed straight after this video. I'm getting a lot of dislikes for something??

  • @ukaszj1431
    @ukaszj1431 3 ปีที่แล้ว

    www.ebay.pl/itm/224277205685

  • @Akotski-ys9rr
    @Akotski-ys9rr 3 ปีที่แล้ว

    I bet I have better acceleration

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      probably back then; yes. The truck weighed about 15kg+ because of the metal conversation. It is going up hill on this video by the way with 50% or 60% forward power locked, I really can't remember. I did this because there were cars parked on the road. My new truck (with similar specs) is all plastic now and I'm just waiting to install the new ear plugs. So at 100% race mode; I think it will fly!

  • @GiantRobot-ic4if
    @GiantRobot-ic4if 3 ปีที่แล้ว

    That goes 50mph on upgraded gearing, with wheels like that it wouldn’t be smart to go on higher gearing. Meaning that will only go 40mph on perfect weather conditions, practically anything can beat that. A car on 12s could smoke it

  • @ishave2506
    @ishave2506 3 ปีที่แล้ว

    Simple times

  • @cvntechnologies
    @cvntechnologies 3 ปีที่แล้ว

    Does anyone know how to get the dam control panel for the rog Centurion ? I can't find it anywhere.

  • @bigchadsmall
    @bigchadsmall 3 ปีที่แล้ว

    Why don’t you put it over your motor?

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      I did, then I changed it to the front because I noticed it blows all the way through the whole inside and exits from the back end of the truck, cooling the ESC first (most important) then the motor. It's is a high static fan, so the pressure reaches quite far.

  • @gordonweisz5216
    @gordonweisz5216 3 ปีที่แล้ว

    My e revo would beat that

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      Probably will, as the e-revo is totally a smaller scale. Also my truck weighed 15kg+ back then.

  • @Midnitex
    @Midnitex 3 ปีที่แล้ว

    heya, i just wanted to ask while to tri screen these did you have any issues with the bezel at the bottom sticking out and creating a gap between the monitors? i want to tri-screen these but it seems its an issue a lot of people have.

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      Yes! Problem with the bottom bezel corners. I had to tilt the screens forward a bit to try and eliminate most of the gap. I hope this helps.

    • @Midnitex
      @Midnitex 3 ปีที่แล้ว

      @@stresstech7189 after adjusting how big are the gaps between the monitors? I've tried looking for a monitor that has IPS, gsync, 1440p,27 inch and can't seem to find a replacement for my predator.

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      @@Midnitex About 1-2mm gaps above the bottom bezel working up until it disappears. That's when I got the bottom bezel touching without a gap. If that makes sense?. Mine are TN models for better ULMB mode. Them predator IPS are getting very rare. You need to shop hard!

    • @Midnitex
      @Midnitex 3 ปีที่แล้ว

      @@stresstech7189 Ty for the reply, this helps a bit tbh since i now know i can line them up with minimal gap but its still annoying thats its not 100% in line - acer messed up with that bottom bezel. Yeah the ips ive seen for decent pricing but still unsure since the bottom bezel being an issue.

  • @vinzvega5614
    @vinzvega5614 3 ปีที่แล้ว

    Are you using displayport 1.2 or 1.4? I have a 7680x1440p and its only running on 60hz in nvidia surround tho all monitor ar capable of 75hz and more.

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      I can only run it at 7680x1440@85Hz max, no G-sync, using this laptop on this video. The laptop has; 1x HDMI 2.0 output, 2x mini DisplayPort 1.3 outputs (2x or 1x DDI optional), 2x USB-C/ThunderBolt3 ports (2x or 1x DDI optional with DisplayPort/s 1.3). I think I ran this video on 2x 1.3 DP and 1x HDMI 2.0 I can't remember fully. This is a link to my test that I done on this laptop: forum.notebookreview.com/threads/the-p870km1-g-multi-single-g-sync-nvidia-surround-screen-adapter-test-thread.806524/ I hope this helps.

    • @vinzvega5614
      @vinzvega5614 3 ปีที่แล้ว

      @@stresstech7189 thanks

  • @mavsgarage5245
    @mavsgarage5245 3 ปีที่แล้ว

    That’s just the center diff being loose, it will be a lot faster if you put a earplugs or thicker grease in the center diff

    • @YouWillTunnel
      @YouWillTunnel 3 ปีที่แล้ว

      If the centre diff is loose it wont have grip to move the wheels at all? I think it's going up hill on this video.

    • @mavsgarage5245
      @mavsgarage5245 3 ปีที่แล้ว

      @You Tunnel if he doesn’t have any diff grease in it or a low weight it won’t move the tires in the back hardly any. The center diff from the factory is designed to take absorption from jumps and to not loose hardly any power from normal acceleration. I think what happened in this clip is that he has never changed the grease in it which has made all the grease work it’s way to the outside of the diff

    • @YouWillTunnel
      @YouWillTunnel 3 ปีที่แล้ว

      @@mavsgarage5245 after I watched this video a few times... I noticed on the start of the video, the X-maxx is going up hill, because the rear shocks go down and the front end gets lifted slightly. When the truck goes down the hill, the rear wheels still lifted the truck too. It nearly flipped it. I think the diffs look well good. Either way, it's quite a vicious X-maxx IMO. I don't like some of the specs on the description though.

    • @YouWillTunnel
      @YouWillTunnel 3 ปีที่แล้ว

      Same car, same TH-camr, but driving it on grass. It's lifting from the back end every time: th-cam.com/video/CRXG1sTae7k/w-d-xo.html

    • @stresstech7189
      @stresstech7189 3 ปีที่แล้ว

      Thanks! I will have a look into them earplugs. I used stock 20mil weight. The power was on 60% on the Traxxas app too. This Castle Mamba XL2 (current limit at 300A) is insane compared my HobbyWing Max 6 160A ESC.

  • @Esotericreation1618
    @Esotericreation1618 4 ปีที่แล้ว

    COVID-19 CORONA-VIRUS IS A PLANDEMIC SCAMDEMIC PUT IN PLACE TO COVER UP PEDOVORES,PEDOPHILES TO CONTINUE CHILD TRAFICKING AND TO BRING ABOUT THE ESTABLISHMENTS NEW WORLD ORDER SYSTEM WOULDN'T BE SURPRISED IF THEY TRY TO IMPLEMENT THE SOCIAL CREDIT SYSTEM UNDER A GUISE OF CHECKING PEOPLE FOR COVID-19 TO BRING US MORE IN TO AGENDA 21-30 PEOPLE ARE UNITING EVERYWHERE AGAINST THIS DECEPTION IT WONT LAST MUCH LONGER WITH WHATS GOING ON IN THE WORLD AND PEOPLE WAKING UP EVERYWHERE ITS ONLY A MATTER OF TIME BEFORE THE ILLUSION FADES.The WHO is a Jesuit Health Organization you can not take them seriously or trust them for they have lied to humanity for as long as they have been around with their empire's of control over the human race through their Black Nobility Families. Tedors Adhamon run's the W.H.O an is not a Doctor of any sort he is a puppet that was used as a Marxist Terrorist in his own country where he was the 3rd most powerful person in the TPLF a Communist Revolutionary Party in Ethiopia that was listed as a terrorist organization in the 90's and as a political arm of a minority ethnic group (6%) reportedly conducted systematic discrimination and human rights abuses against the majority ethnic group. So odd that the NEWS would neglect to mention this. I thought they hated racial discrimination, ethnic persecution and human rights abuses? An you know what the rabbit hole gets deeper with Bill Gates an Anthony Fauci been great great friends with Tedors Adhamon! All 3 of them Jesuit puppets and Freemasons following orders an handing them out to slaves who take them an distribute them through their circles till they reach you through your/our own governance systems. So i wouldn't be so quick to trust them an to research without bias or prejudiced from your own ego or pride an to do one's due diligence and learn an connects the dots to see the patterns.

  • @pyro4894
    @pyro4894 4 ปีที่แล้ว

    that fps tho

  • @XantoS771
    @XantoS771 4 ปีที่แล้ว

    It's almost unreal how accurate it is...

    • @abrahamicreligionsbowbefor3585
      @abrahamicreligionsbowbefor3585 4 ปีที่แล้ว

      Hey, the rioting did intensify, and they may not be able to contain it

    • @stresstech7189
      @stresstech7189 4 ปีที่แล้ว

      @@sb6162 "Let it spill over into the schools and churches, let the bodies pile up on the streets. In the end, they'll beg us to save them."

  • @planecrazysimon
    @planecrazysimon 4 ปีที่แล้ว

    Looks like a zebra finch. It has an orange bill.

    • @____Johan____
      @____Johan____ 3 ปีที่แล้ว

      ARE YOU FUCKING DUM THATS THE FREAKING TITLE

  • @antonfrimor9477
    @antonfrimor9477 4 ปีที่แล้ว

    Well how do you get that rog software hub thing to adjust the sound, I cant seem to find a download link anywhere

  • @Hackenberg
    @Hackenberg 4 ปีที่แล้ว

    What settings did you use in the registry to get this? I have three 1920 x 1080 monitors and kept messing with aspect ratio in the registry at 2444 until I got a 5760 x 1080 borderless window with the aspect ratio at 2444 set up, but everything is squashed. When using 5333, it reverts back to the center monitor. Maddening.

  • @nasrinobadi7818
    @nasrinobadi7818 4 ปีที่แล้ว

    😊👍

  • @clairrollings3988
    @clairrollings3988 4 ปีที่แล้ว

    WOW incredible does anyone know this game?

    • @aardvarkproductions6878
      @aardvarkproductions6878 4 ปีที่แล้ว

      Yeah it's called Nekopara. There's 3 main volumes, and a prequel volume 0

  • @eyeseeyou3322
    @eyeseeyou3322 4 ปีที่แล้ว

    😈👌

  • @magiermexico
    @magiermexico 4 ปีที่แล้ว

    Great

  • @weldy1795
    @weldy1795 4 ปีที่แล้ว

    Click bate ass video

  • @kromstm2z5
    @kromstm2z5 4 ปีที่แล้ว

    i am actually gonna buy the evoc p870tm-r it has the same design as the sager but looks a bit better and it is more powerful it is actually the most powerful laptop in the world including the MSI GT76 titan and the alienware area 51m

    • @stresstech7189
      @stresstech7189 4 ปีที่แล้ว

      This is the best dealer for that system: www.hidevolution.com/evoc-high-performance-systems-p870tm-r-17-3-fhd-144hz-qhd-120hz-qfhd-60hz-i5-9600k-i7-9700k-i9-9900k-rtx-2070-2080.html

  • @Pwickrebuilds
    @Pwickrebuilds 5 ปีที่แล้ว

    Hey kid, it’s spinning the wheels cause it’s fwd

    • @abehasssan634
      @abehasssan634 3 ปีที่แล้ว

      The RC Maniac r u dumb?

    • @Pwickrebuilds
      @Pwickrebuilds 3 ปีที่แล้ว

      Abe Hasssan I know the truck is 4wd but the center diff is lose and giving a lot more power to the front wheels

    • @abehasssan634
      @abehasssan634 3 ปีที่แล้ว

      The RC Maniac oh yeah ur right

    • @Pwickrebuilds
      @Pwickrebuilds 3 ปีที่แล้ว

      Abe Hasssan yeah😂😂

    • @Pwickrebuilds
      @Pwickrebuilds 3 ปีที่แล้ว

      Abe Hasssan I know I have an over powered x maxx and I had the same issue

  • @Folk_var
    @Folk_var 5 ปีที่แล้ว

    Thank you. Was about to send this headset back.

  • @kimdra9321
    @kimdra9321 5 ปีที่แล้ว

    WoooW

  • @DandSCreations
    @DandSCreations 5 ปีที่แล้ว

    I happen to have a toro beast X524 and a turnigy trackstar 200A ESC, and a T Maxx 3.3 would the stock trans and all hold up to this thing? It's litterally going from 1.1 hp to 8

  • @Manul-po1ws
    @Manul-po1ws 5 ปีที่แล้ว

    Nice Truck 😀Video is 🤢🤮

  • @texelhardware4234
    @texelhardware4234 5 ปีที่แล้ว

    I like the setup a lot, quite a lot! But question... how does a 7700k, with 16 pcie lanes drive 2 1080's, plus 3 NVME Drives that require 4x PCIE lanes minimum EACH to operate? Ideally you would want to have 16x2 for the graphics alone, which is 32, plus 4x3 for the NVME lanes, which is 12. This means that the CPU is choked off for PCIE lanes since the optimal setup would require a CPU with a minimum of 44 pcie lanes. (x299 i9 7900x is the lowest tier that meets this specification) The 7700K only has 16, so that leaves only 4 lanes available at ALL to drive both 1080s? At best this is only getting 2x pcie lanes per GPU. Something does not add up.

    • @texelhardware4234
      @texelhardware4234 5 ปีที่แล้ว

      I have an x299 i7 7800x cpu with 28 pcie lanes, and I run a Samsung 960 Evo 1TB NVME drive and a single watercooled 1080ti, and with my own limited 28 pcie lanes, I am unable to occupy 2 sata ports on my motherboard, and even less if I run more NVME drives. I do still have 8 lanes unoccupied though for future use on another PCIE card OR for 2 more NVME drives but... that puts it at a maximum of 3 NVME drives for this cpu before the GPU starts getting cut short on PCIE lanes below the ideal allocation of 16. I'm not saying It is necessarily wrong, but are you SURE it contains this much hardware? I wasn't aware of any laptops that boot 3x Raided PCIE NVME drives, I was just curious to know how sager engineered this if it is all correct. Thanks for sharing such a unique setup with the community of PC enthusiasts!

    • @YouWillTunnel
      @YouWillTunnel 4 ปีที่แล้ว

      @@texelhardware4234 Easy! A Kaby Lake system supports a total of 40 PCIe lanes.

  • @91kiiler
    @91kiiler 5 ปีที่แล้ว

    So what you think what a better asus rog centurion or steelseries gsp 600 or steelseries arctis pro gamedac

  • @benhuremirli499
    @benhuremirli499 6 ปีที่แล้ว

    where is the downland link man?

  • @DarkMasta95
    @DarkMasta95 6 ปีที่แล้ว

    Do I need the Sonic Studio for the headphones to work properly or just installing this app is fine? Everytime I press the 7.1 button on the power station it seems as if the sound is completely the same...so 7.1 is either always on or always off...help? Third option is I have really bad ears and can't tell the diference between this 7.1 ON and OFF. I had the 7.1 Strix (virtual) and I noticed a HUGE diference when turning 7.1 on and off. Now I bought these centurion with TRUE 7.1 and I press the button and the sound is exactly the same. P.S- When Im using the headphones and monitoring the sound via the software, I only see the sound bar moving up and down on the left and right "front". the Side and rear have supposedly no sound coming through.

  • @Ranked3DStats
    @Ranked3DStats 6 ปีที่แล้ว

    How to migrate os to ssd? I changed my hd to ssd but i got error in booting from ssd after cloning. I also checked the bios and the legacy is enabled but i didnt see the ssd in the list of boot order.

    • @stresstech7189
      @stresstech7189 6 ปีที่แล้ว

      Check to see if your hard disks are a MBR or GPT setup. convert your SSD to a GPT, then clone again.

  • @jesusisrussian7059
    @jesusisrussian7059 6 ปีที่แล้ว

    Never use unigine Valley Benchmark.. if u want this video to be popular fuking use PUBG and FORTNITE to do the benchmarks other games or apps are for subhumans.

  • @Esotericreation1618
    @Esotericreation1618 6 ปีที่แล้ว

    It still sounds like shit its like your voice is muffled & clipping even with all the tweaks an settings im definitely taking my headset back for something better. The Sennheiser GSP600 is looking like a good option but i dont know how i feel about the adjust-ability. The mic is alot better however which is a big factor.

  • @daHelli
    @daHelli 6 ปีที่แล้ว

    Top thumbs up class setup!

  • @GerhardtvanStraaten
    @GerhardtvanStraaten 6 ปีที่แล้ว

    Cheers thanks Bro

  • @thatsmyrc
    @thatsmyrc 6 ปีที่แล้ว

    Great rig but felt like I was watching the grass grow lol.. Thumbs up for the xmaxx

    • @stresstech7189
      @stresstech7189 6 ปีที่แล้ว

      Thank you. lol Hopefully, next time I will do the video with a tripod. I'm just waiting for my ProLine Badlands to come.

  • @SwedenRCAdventure
    @SwedenRCAdventure 6 ปีที่แล้ว

    You got a really nice truck there ! =D Awesome upgrades!

    • @stresstech7189
      @stresstech7189 6 ปีที่แล้ว

      Thanks dude! more videos coming soon... I only need a skid plate set and a roll cage. This will then make it fully upgraded. If you can think of any more upgrades that I can do, then please share. This truck is no longer an X-Maxx lol