วีดีโอ

@@RoadWarrior_John thanks a lot! Good to know that u liked the lore ! (And cars) And you noticed smol details like the smoke things nice!

@@Mark_Tullium Hmm good question, to br honest I guess I only barnished off camera the Red rust primer, the black paint i guess it looks a bit glossy becuz if you apply it without an airbrush as I remember I done that... it looks glossy BUT then its when the day brush and dust pigments came to finish the job. BTW now that diorama its covered with a small plastic glass box in order to protect everything from dust because: If you barnish a model like a car, tank... you can remove the dust easily without breaking nothing BUT if you use Pigments.... Each time you clean it with a small brush you remove that same pigments so it's better to cover the entire thing with something

Wow to recieve that compliment from someone like you sir its awesome! Thanks a lot ^^

Quien sabe? 👁👄👁

@@joaomiguellomboni5655 Haha you're welcome! Thanks a lot!

@@Backoffridge thanks ;P

@@vincentvandevorst5575 that's nice! Thanks! RN I'm finishing the final touches on the next scratchbuild vid :O

Haha thank you very much!

@@PaddyIRA can "you" make yes, I don't consider why you should not make one.. If your keyboard betrayed you and you wanted to ask me to make more hobbit tanks, I will do some hobbit related things of course, but I also have to make more things like aerial units, goblins and goblin vehicles etc..

@@AlacranMiniatures ok thanks

@@PaddyIRA OH I answer that somewhere but I forgot! Ok the hobbit dude is a kitbash a "mix' of two different boxes from the same manufacturer: wargames atlantic Halflings and ww1 french infantry.... apparently an important ammount of things on those kits look interchangeable without any putty like the normal rifles, Smg,s even in halfling torsos... the head its from that same ww1 box. And the small pig came with a (I guess now) difficult to find Akuyaku 1 Go... a super heavy miyazaki designed tank at 1/72 scale wich fits for haflings on 40k or other games.... snotlings or goblins such as a globe to a hand. The halflings are easier to get and the kitbash I would say.... Maybe someday I should 3d sculpt some piggies 🐷 but for now I have only 3d sculpted the things that i have on my cults 3d account....

​Ok TANK you (Sorry for the joke)@@AlacranMiniatures

@@PaddyIRA Haha no prob I use that same joke probably too much sometimes

@@marcoantoniosalazarmatamor3014 Vaya pedazo de nombre más Épico que tienes por dios! Y gracias ;P mucho del diseño lo base en el Videojuego de Atomic Heart

@@brunokopte1347 Wow that's a really good obscure thing, I knew about mobile turrets but not that one, with the carriage it looks a 1 by 1 inspiration haha. But to be honest the idea of this cylindrical turret was inspired by the miyazaki akuyaku tank wich has lots and lots of mini turrets wich look like that one. But yep it's surprising if I'm not wrong on the 1898 the spanish Battleships like the Vizcaya had perfectly semi spherical turrets(less cute thank the Fahrpanzer).... and some ironclads (chinese ones) of the 1890,s era also. And thanks! I'm glad you liked everything including the stopmo ;P

@@brunokopte1347 Wow haha Thanks a lot for that Compliment! Yep I believe that for creating desings (specially if you are using trash) the less overcomplicated details the easiest its for everyone to replicate it and the its more fun / and usually it gaves you a kind of "canvas" to be free when painting or looking to, such as the simplicity and sexyness of ww2 piston powered fighters, and then the first jets... Or in fiction for example in fallout the T 51 power armor, or the Bungie era Spartan armors and vehicles.. It gaves a kind of "this thing, this design" is grounded, even if it's on a fiction setting.

@@AlacranMiniatures Agree a lot. Too many overcomplicated designs facilitated by easy digital modeling these days. Even the new Evangelion movies, which I liked a lot, can be criticized by some exageration when it comes to CG. Btw, are you familiar with Phil Tipett's Mad God? Seems like you would like it.

@@brunokopte1347 Nop, Phil Tippet its a familiar name for me but I didn't see that film, I will add it to the: To watch list...(the promotional images I see on the Internet are cool BTW!)

@@AlacranMiniatures Not a movie for everyone, you might like the designs but not the movie itself. It's a couple decades of work, fueled by his wife's death, his thoughts of suicide in the middle of Jurassic Park etc. More like a nightmare in which he lets out his inner demons than actual movie. But the designs alone are inspiring.

@@brunokopte1347 Sadly some of the best pieces of art are fueled by nightmares. Like the Lord of the rings and Tolkien experiences on the battle of the Somme Or Don quijote and cervantes on the battle of lepanto Or The offspring singer Dexter Holland with the song: Gone Away But yep the designs of this film look Rad "quite literally becuz of cool gasmasks"

Okay then Haha! So it's time to modify some dudes with putty! BUT I guess for a long vid I will gave them some vehicle or something to make it more interesting to watch 👀

@@deltastudioswastaken Thanks that would be neat! But as youtubers like Bill from Bill making stuff or Boylei do, I'll maybe should wait a bit till I become more popular to found it Haha. It's a nice idea BTW thanks ^^

@@deltastudioswastaken I didn't knew about that game but now I search for some pictures (looks cool!) And some of the tonks there look like late ww2 early cold war things, For example there is a really long tank like the French Char 2C Aaaaand an M 60 tank turret... It's interesting! To one of my friends this tank reminds him something obscure from metal slug :O

@@paintnamer6403 Dominic Turreto liked that comment

Yep I guess I say that atomic heart was a big reference on the 0:30 sec

@@mikesmith2905 this guys are at 1/35 scale But it could fit properly in a weird scale such as the warhammer heoric one.... At 1/72 scale I imagine that it would be as long as the engine and propeller part of a spitfire or Mustang, More or less (so this ones would be bigger than a person) BUT if you use smaller parts of pens you could achieve something similar to this ones, for example using the clicker of the pen as "main body" and as "turbines" plastic parts of the Ink tubes :O Ill hope this help you ;P

@@AlacranMiniatures Yes, but cutting things down I could make it work I think. Toys for imaginative play are hard to find these days, that's why I make up my sets. I get asked mainly for world war two sets with knights and knaves and Sci-Fi in equal second place, the first two are well served but sci-fi is hard! I use Dark Dream Studios Space Battles sets 1 and 2 for soldiers (sometimes bolstered with a local militia from Airfix paratroops), Dark and Light Alliance Stalkers as space pirates, various ground crews as space base personnel, various ancients as civilians, some of the Dark and Light Alliance and Caesar fantasy figures as aliens. Space ships I have to make as the only ones on the market are 'merchandising' and hence over-priced, for land vehicles I now use cheap 3D printed obscure cold war vehicles. A few robots would be good to have. Thanks for posting, look forward to seeing more of your work.

@@mikesmith2905 hehe thanks! Yep there are out there nice cold war sets like the 1/35 Walker bulldogs or IS 3 at something like 20, or 16 €.. BTW: There are cheap starships of Lightyear film I guess, you can pick a zerg destroyer wich is like 20 € also and at 1/72 could be a Frigate, Or a Mining space rig thing.... wich also carries 1 drop pod. Yep that ship could be identified as a Lightyear ship, But with a coat of yellow or grey and a few bits... you'll have a completely new thing! :0

@@AlacranMiniatures I'll check those out. I give my sets away and I'm retired so cost is an issue and I try to make everything in ways the youngster can copy. I can get 3D printed vehicles for £5-6, for space ships I have a collection of domed tops from milk shake drinks, add a self cover button to cover the hole on top and a disc of foamcore in the bottom. Landing legs are dress making pins pushed through press-studs (poppers in the US) with a winding of paper to make them look like hydraulic rams (secured on the inside with polyurethane glue (gorilla glue) as it foams up and sets hard. In 1:32 (for 3-10 year olds) I use 2mm greyboard (in the US I believe that's 'chipboard', the stuff you get at the back of a writing pad). I make a simple box with a wedge or curved front end and a sloped rear with lolly sticks to add detail to the sides and top, if you slope the back at 50 degrees you can hinge the rear ramp with a scrap of cloth and it'll stay closed as you run round the garden with it. The landing gear is lolly sticks on edge with extra long matches either side to brace them. Total cost about £1.50, I paint them with house paint. Currently making some flying saucers in 1:72 using drain pipe collar fittings, should look like the ships in the TV show the Invaders but gluing to UPCV is difficult. Plan is to have a removeable top and a detailed interior (always goes down well if you can put people inside).

@@mikesmith2905 wow that's a lot of cool and useful info! Hmmmm to make a removable top for the UFO I will add some kind of magnets like neodymium ones (you can buy those on hobby stores or dollarstores) I added magnets to my Hobbit tank and also on this drones or bots for having some "movement" or modularity to put different versions. Also fridge magnets should work but they are less powerful than those little chromed neodymium dudes!

@@Gupiter_IDK Thank you very much! To be honest the variants and tank mods where carefully developed by the method of: What happens if I glue this to THAT... OMFG!

@@glurberdurberman-cs4pd Miyazaki has a fantastic mind when developing machines and things for his stories, so I understand pretty well you sentiment haha Edit: thanks BTW ;P

@@KaiserV-2 Of course! Rn im working on the next vids Hehe

Haha thanks a lot! Yep that's the spirit, my idea its to make the most approachable Building stuff from trash.... and if I use let's say: Extremely rare plasma rifle from 40k assault on black reach box.... That's precisely not easy to get haha.... while pen parts... are everywhere!

@@whanngabrylsanoy721 I don't believe that hobbits and gnomes get along well, but probably they understand each other better than hobbits and orks or gnomes and goblins ;P

@@kobyohmarsomozo4351 Of course and it's easier to keep doing things with such kind of comments like this haha!

@@dirgantara624 Thanks for the kind words ^^

@@bannickartem7624 Yep, if indiana Jones can (but I choose the wild wasteland end result for that move) the hobbit can also do the same... but have a better outcome due to: Magic Typical UNO card in fiction: Magic/alien tech

@@dirgantara624 Hehe Glad to hear that! ;P

@@garyjust.johnson1436 Hello ;P

@@dirgantara624 thanks ! ^^

@@Lock_KnightThanks a lot for the compliment! Dvorak 9th symphony, Verdi and mozart Dies Irae are the most metal things on classic music one can find besides Wagner, that's 2 things I don't understand: 1-Fixation of people saying: Classic music is boring. 2-Only cool classic composer is Wagner (wich I really like). One just can't listen to Dies irae, Dvorak 9th Symphony, or Götterdämmerung... without wanting to invade something so = NOT being boring

@@bannickartem7624 YEP THATS THE THING you notice what keeps me awake in the night. I suppose that the tank maybe due to complex gear shafts under the turret (manufactured by dwarves) can be pirated by just one dude inside the turret , wich on the other hand means that it has a terrible visibility for the driver (only the small gunner sight). The Scorpion in halo its only operated by one soldier, odst, marine or Spartan with a neural plug.... Soooo in this ww1/magic setting its due to: MAGIC GEARS And it's the only possible explanation I have.

@@ChaseDaOrk3767 Hmm OK you have a bunch of options there: For example if you live in North America you have Home depo and they sell Really big sheets of Cork.... in Europe you have other things like home depo such as Leroy Merlin... I guess IKEA also wich is international also... but for going to this places usually u need a car Small shops like dollar store or craftsman/handyman shops wich are emplaced on cities, Mine Cork things came from a german shop called "Tedi" and they sell to all Europe, And the ultra cheap option: Trash, sure for example: Those Cork panels to put pins and notes one office buildings, when they trow that its free.... buT its also quite cheap the dollarstore/craft shop. Usually they are in the kitchen section because they are used to put hot things on top to not burn the table such as pans , glasses the cofee maker...

@@ladahieno2382 haha thanks!

@@pudddingfishh2953 hehe thanks a lot!

@@apathtrampledbydeer8446 Thanks ^^!

@@UsernotFound2018 To be honest the best way to show you that, is sending you to this page wich is the official Tonks game (and other games if you are interested) you can download the rules free BTW.... also Bill making stuff has a nice battle report of Tonks: 28-mag.com/games/

@@AlacranMiniatures Thanks👍

@@Cornelius-b2k Yep that's the idea! And also small enough that can be carried on a matchbox wich is easier to carry on buses, trains...

@@rubenawer Muchas gracias! Aunque la verdad es que es una plataforma sobre la que poner cosas encima después tipo: Favelas, vehículos.... ella sola es un poco aburrida de mirar, gana más con cosas puestas por sitios!

@@Hand_of_NOD in my mind as an artillery observation tower its filled with different floors with things such as a radio, optics on the top like the rangefinder.... and it's not a bad idea what you say because you can clip a banana or sandwich to one of the bullet,s belt and cycle the machine gun till the sandwich gets to the top floor... as a kind of makeshift food elevator.

@@benmingle2615 Haha thanks! Noice kind words! I will do more things such as vehicles, flying vehicles... maybe terrain also, But for now its just the hobbit Tonk. Regardless as a source of inspiration I use the worlds of Howls moving castle, and Laputa (castle in the sky), it has that weird ww1/fantasy/steampunk asthetic.

Haha thanks a lot! To be honest: all the different versions of turret and accessories exist because it was not planned before... the process actually was more like: What happens if I put this... or that, here?

Thanks Robert!

@@truesamsonite To be honest I'm extremely surprised and glad of how fast this is growing since I uploaded the video this sunday. But yep let's aim for the 1000! ✊️

@@FranktheBlindArtist I guess they also like cider, but they like also wine, beer, tobacco... in general they like to live well, but for when I make some dwarves, A beer distillery fits better for both

@@AlacranMiniatures true!

@@VinsxxBlitz Actually I made some kind of Archer (becuz aimed backwards) using an electrical motor to make some kind of...."Tesla Stug"... thing... Yep weird to say it out lord if you cant see it!. Nevertheless you can see that one on the longer vid ;P