วีดีโอ

It's a grant video, BUT WRONG INFORMATION. The amp does work from 9 to 15v, but it's rated at 14.4. Who would run an amp at 9v? You're running at 15.8 on a stock electrical amp! Too much voltage, and you're fortunate they replaced it. The amp is 1 ohm stable, not .5 ! Again, lucky they replaced it. Also, these amps are produced by Sound Digital they are NOT Korean made. I know Brad, and he's not abusing his equipment, lol. Since you asked for us to let you know what we think, I think the amps are great, deaf bounce displayed awesome customer service and user ass hole, I meant error 😅, blew those amps! These are just typical Sound Digital full range boards. Not made for .5 or high voltage, and you're went completely against the grain, and maybe the warranty guarantee.

Team pie amps

I'm kinda skittish about the internals

I’m running two ass 6000.1. I’m real happy with them. But they use a lot of juice so make sure your electrical is up to snuff. I have two jp40 lithium jp630 super cap and a super cap under neath the hood to replace my agm. Under full till it holds to 12.5 or higher

next time lift the mesh/wire while applying the concrete , you want the mesh/wire to be in the middle of the concrete . what happened with the door redo ??

Any amp will blow too

Nice amp. Db don't play

Looks just like a Korean amp. I'm sure it will perform just as good. Doesn't matter where it's made. The design is what's good.

Blew 2 fkn dumb as fk to try another jffc same as tarashit

Same as jp amps they fkn blow up period

Plus wind sucks it doesn't prove nutz nor listening pleasure n look guys blew one already they aren't near the hcca build quality sorry but truth is just that

U should look up what 8ga cables can safely carry n I promise ya that amp nor near any other can't benefit from bigger than 8ga speaker outs smffh

9 volts or over 15 no warranty are u fk w me jffc size of that is stupid I wanna dyno drag it cause I'm sure for its cost I get two hcca 3ks I'll strap em n shred that with cash left for a third hcca3k I'm sure smfh.

Ta stupids .5 it void warranty smfh

Shut up smfh the orion hcca 3k does the fkn same at .5 lmfao 3 0gauge power ins pulls over 1k amps of current dynamically lmfao only 699 ya might awwww fk it nvmnd no one listens nor can process n fkn think clearly

Damnnnnn

LoL basshead problems

Good korean amp ! Love korean amp 😍

Show us what it's putting out in real time

That without ear pro is crazy

Bet you've never seen a teampie 7500.1 pop they are Chinese built korean boarded monsters. Ran two for 4 years at .5ohm full tilt every single day never not one single issue and the smooth rolling knob has voltage and temperature only shitty thing is its Celsius instead of farenheight.

Why don't we just install air horns inside the cab at this point?

Still didn't hear music

153+ at 19hz, that's not easy to do :D Nice build man!

There not 1/2 ohm stable, 1 old, I would stuck with what it was stable at

Lolololol 🤣 hey bro I found an AAB 7900.1 on marketplace can they be run at 15.8

🔥🫡

China ya.. but it's up to the (manufacturer) def Bonce to make sure components are what they want.. They should have torture tested a dozen them self. It's on DEF. Not china

Where u get the box design for the 4th order i like this enclosure i have 6 12s but im going with 8 on 2 smart 5k's

My asa 6ks did, however, had major thermal protect issues. Things would get HOTT

They do rated. I was wired at .5 rising to 2 ohm clamping 4,000+ watts on each 8k

I do agree with any amp we blow up what. Max voltage on the amps

I'm go be run. 6/8k. ASA 8k

So what you think of. The ASA amps

Your the only review I've found. Is this more like the butyl rubber or is it more foam? Thanks for doing this review I'm probably going with this then their hybrid on top

Real world stuff!! Not all the behind the scenes stuff is fun or easy. Keep building!

Yeah, let’s see the numbers. A smooth bass knob is essential. All my DB equipment has worked flawlessly. And all brands have problems. Good review.

If you ever decide to sell your AAK-8000.1s ill be interested and I greatly appreciate you and your time.

These work at 15.8 and what about a cold start winter is coming up and do you have a discount code for Deafbonce my AAK 6k is getting fixed right now should have it back within a week but im looking to put an 8k on each 15

I definitely want to see what there putting out.

Sucks about the second amp, but it happens!!

Looks good

I want to build the same bank. Once you build it and charge it, do the alts keep them up? Do you have to ever hook up your charger to the bank after it is in the car/vehicle?

I didn't know he was from chatt that's awesome we have some major names in the car audio community right here in TN from you to poppa T then exo and Eddie from sparked innovations and crazy hobbies down in Memphis and so many more TN is starting to feel like the heart of the car audio scene to me really digging that TN be bumpin 😂

Where did you get the ratchet style brace's from im getting ready to do my roof and floor and I don't know if I will have much room for clearance for my head so do you think I can get away with using 1x4's and a single sheet of 3/4 MDF I actually may have to use 1/2 MDF on the floor and vibraflex around it and up the side of the floor to complete it and save room vertically I am going to have to do the doors and panels really good with both deadener and closed cell foam they were already starting to flex with the Cab-45 the AAK 6k will be fixed this week it's at the repair mans house and I just got a SPL lab meter for testing got a lot of work to do in the next few weeks but great video I'll be trying your methods very soon

Siless 120 mil max is great budget deadening material I have three layers in the trunk and another layer on the rear seat area and back doors 150 SQ ft total just in the back of the car about to order another couple boxes and get some closed cell foam for a layer on the back side of the door panels what exactly can the pl stick to can I do the roof to and still apply wood later is it not sticking to the foil tape??? I've been recommended going with vibraflex on the roof and floor and then a layer of wood on top would that work good

Sounds so clean cos you don’t hear the bass till the camera is inside the truck and it’s banging

😂😂😂

Real deal getting it done!

12 15’s for the win. I like the facing them together ideas. Very different, would be cool to see.