วีดีโอ

Needs an alarm state.

Now show me one with a 50-100m remote control and ill buy one

Thank for posting this, I wasn’t sure if the circuits were independent.

Buy now: czh-labs.com/collections/terminal-block-distribution-din-rail-mount-with-fuse

DIN Rail Mounting Fused Terminal Block DC Power Distribution Module, CZH-LABS D-1125D: czh-labs.com/products/czh-labs-din-rail-mount-ac-dc-532v-10-position-power-distribution-fuse-module-board-p0445 DIN Rail Mount to Wall Mount Adapter Bracket: czh-labs.com/products/din-rail-mount-to-wall-mount-adapter-bracket-for-din-rail-mounting-interface-relay-terminal-block-module

Buy Now: czh-labs.com/products/rs232-breakout-tester-led-monitor-module-db9m-f-x-db25m-f-breakout-board

Features: 1, RS-232 interface DB9 male, DB9 female, DB25 male and DB25 female, supports any one of the connectors as Master Input, and supports any one of the connectors as Slave Output. Connect in series with any RS-232 interface for testing a serial RS-232 data link. Simple and easy, no oscilloscope is needed. DIP switch can setting disconnect or reconnect any signal, and support external probe test signal from male or female position. 2, 8 double-color (red and green) LEDs indicate the logic states for respective data lines. Green for logic HIGH and red for logic LOW. Full RS232 spec compliant with LEDs for all 8 signals: DCD, RXD, TXD, DTR, DSR, RTS, CTS, RI. 3, No external power required. No driver required. Plug and play. Jack sockets(nuts) on the tester can be unscrewed easily(with metal shell held in place) if needed to mate with another connector that has jack sockets. 4, OS Compatibility: Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8 as well as Linux and Mac OS 10.X, ect. 5, Typical application scenarios: Watching the TXD and RXD LEDs either changing states or flashing to know data transferring direction: from machine to computer or from computer to machine. Verifying TXD/RXD wires should be wired crossed(swap pin2 and 3) or straight through by observing TXD and RXD LEDs at a rest state. Verifying it is a DTE or DCE device (and whether you need a null modem or not). Verifying whether modem controls are active, even if they're not being asserted. Testing control signal between control systems (AMX, Crestron, etc) and the devices they control. Determining if the serial connection is mated properly and if communications is occurring. Whether the wall control or the projector is malfunctioning.

What is the maximum number of LED bulbs that you can have tied into this flasher?

I have alot of questions. Is there a good phone number to contact the seller?

What happened i was watching a programme lavander at large

Reverse forward machine ka name kya hai

does this unit have a mechanical relay inside doing the switching?

' nice wheel LED kit... i have one wheel LED kit is finish... very beatifully

The cost is too high.

What's the price of this

' wow very good LED rotary kit

Where woukd 6 wires of wifi module go??

Hi CZH, I notice this funny video was publiced before 7 years. Do you still keep this code ? Any possible to release, thank you

Can you provide a link for this kind of water sensor where to buy it?

DIN Rail Mount Terminal Block Breakout Module Board for Pycom WiPy2.0 WiPy3.0 LoPy LoPy4 SiPy FiPy Buy link: czh-labs.com/products/din-rail-mount-terminal-block-breakout-module-board-for-pycom-wipy-lopy-sipy-fipy 1, DIN Rail Mount Screw Terminal Block Breakout Board for Pycom WiPy2.0 WiPy3.0 LoPy LoPy4 SiPy FiPy. With the breakout board, you can easily extend Pycom projects to industrial control applications. 2, High quality fireproof nylon material DIN rail mount carrier, can support width 35mm, 32mm or 15mm rail. 3, Screw terminal blocks: pitch 5.08mm/0.2", strip length 7mm, screws - M2.5, steel, Cr3+ Zn plated. pin header and cage - brass. Wire range 28AWG ~ 12AWG / 2.5mm square. 4, FR-4 fiberglass dual copper layers PCB. UL CE CQC certified terminal blocks, UL 94-V0 certified PCB, and UL CE certified DIN rail mount carrier.

Buy link: czh-labs.com/collections/power-distribution-module-495 Screw Mount 10 Position Pluggable Terminal Block DC Power Distribution Module OONO D-1522B

DIN Rail Mount 10 Position Pluggable Terminal Block DC Power Distribution Module, OONO D-1522T 1, Operating voltage DC 5 to 32V. Maximum total input / output current 30 Amp. 2, Input: Maximum current 30 Amp for per position. Double positions + and - polarity terminal, support power supply expansion connect to other modules. Pin pitch 7.62mm/0.3", wire size 26 - 10 AWG, stripping length 8mm, Metric M3 slotted screw. 3, Output: 10 position pluggable terminal blocks. Maximum current 5 Amp for per position (the terminal highest working current can support up to 10 Amp, but factory pre-installed fuse value is 5 Amp, if you want more output current, please change the fuse). Pin pitch 5.08mm/0.2", wire size 28 - 12 AWG, stripping length 7mm, Metric M2.5 slotted screw. 4, Pluggable fuse holder, can support medium blade ATO / ATC fuse. Each output channel has a green LED indicator, when the fuse is blown or pulled out, the LED indicator will be off. 5, High quality fireproof nylon material DIN rail mount carrier, can support width 35mm, 32mm or 15mm rail. FR-4 fiberglass dual copper layers PCB. UL CE CQC certified terminal blocks, UL 94-V0 certified PCB, and UL CE certified DIN rail mount carrier. Buy link: czh-labs.com/products/din-rail-mount-dc-5-32v-10-position-pluggable-screw-terminal-block-power-distribution-module

M..

OONO D-1513T, 5x 2 postions. OONO D-1514T, 5x 3 postions. OONO D-1515T, 5x 4 postions. OONO D-1516T, 5x 5 postions. OONO D-1517T, 5x 6 postions. OONO D-1518T, 5x 8 postions. OONO D-1519T, 5x 10 postions. OONO D-1520T, 5x 12 postions.

where can I buy this unit ??????

FEATURES: 1, Automatically turn on and turn off the power of the dust collector, allowing you to focus on your work without having to repeatedly manually operate the power switch. The design is based on a microcontroller and a sophisticated power detection IC, making the product more intelligent and friendly. This product has the power-on self-test, and the power-down memory function of triggering power and delay time settings, avoid resetting each time in the future. When you start to use the tool, the dust collector will turn on with a delay of 1 second to avoid overloading and tripping of the power circuit. 2, Operating voltage AC 100 to 130V(60Hz). Maximum current 15 Amp. Maximum load 1800 Watts. Length 19 inch (0.5 meter) power cable, UL-certified American Standard 14AWG (2.08 square millimeter) x 3 cores. 3, The working mode of the dust collector AUTO - ON - OFF can be manually selected. It will be in AUTO mode every time it is powered on. If you want the dust collector to work continuously or stop for a long time without being affected by the operation of the tool, you can press the MODE button to select the desired working mode. 4, The threshold power of the trigger tool to start the dust collector can be selected from 30 - 60 - 90 Watts. This function has a power-down memory function, and it does not need to be set again when the power is turned on next time. 5, The delay time for shutoff can be configured 5 - 15 - 60 Seconds, after the tool is stopped, the dust collector can continue to clearing the remaining dust and residue. This function has a power-down memory function, and it does not need to be set again when the power is turned on next time. SPECIFICATIONS: AC power: 110 to 130VAC (60Hz) Maximum total current: 15 Amps Maximum load: 1800 Watts Mode button: AUTO - ON - OFF, Can be set cyclically. Trigger power: 30W - 60W - 90W, Can be set cyclically. Delay time: 5S - 15S - 60S, Can be set cyclically. Product: www.amazon.com/dp/B09MRZ1RSF czh-labs.com/products/automated-vacuum-switch-automatic-shutoff-automatic-dust-control-switch-for-contractors-and-woodworkers

Product Description: 1, This product can easily mount Raspberry Pi / UNO MEGA-2560 / BeagleBone to DIN rail, expand their range of applications to industrial control. 2, Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ / Pi 4 Module B / Pi Zero / Pi Zero W, Uno R2 / Uno R3 / Mega 2560 R2 / Mega 2560 R3 etc, and BeagleBone / BeagleBone Black / BeagleBone AI / BeagleBone Black Wireless / BeagleBone Green / BeagleBone Green Wireless or SanCloud BeagleBone Enhanced. 3, High quality DIN rail feed and mounting very stable, can support width 35mm / 32mm / 15mm DIN rail, and the carrier feet can be taken apart for wall-mount use. 4, Thickness 1.5mm/0.06" aluminum bracket sheet, the weight is very light and very strong. 5, Package included: 1x Aluminum bracket, 1 pair DIN rail adapter feed and mount screws, 6x M2.5x10mm standoffs, 6x M2.5x6mm flat head screws, 6x M2.5x6 pan head screws. Buy link: www.amazon.com/dp/B07H8HSGXF czh-labs.com/products/din-rail-mount-bracket-for-raspberry-pi-arduino-uno-mega-beaglebone-black

SO TRUE!!!!

thankyou so much for posting the funniest video ever made period this brought light to my life

anderson

Operating voltage DC 4.5 to 30V. Maximum current: 10 Amp. Maximum load 300 Watts(at DC 30V), 120 Watts(at DC 12V). Time-ON 0.01 to 15 seconds and Time-OFF 0.01 to 15 seconds adjustable.

Where can it be bought?

amigo si pudieras pasarme el codigo por favor "edsonys71@gmail" gracias

I am working on a project for my channel that will utilize one of these boards.

Brilliant work! Keep it up! Would you like to be TH-cam friends? :]

Schematics please :)