วีดีโอ

Thanks for the tips. I was trying to figure out how to thread the ends on; they were so tight! I was worried about damaging them with pliers and ended up using some nitrile coated work gloves. I threaded them on first, using an Allen wrench inserted through the hole, then pushed the balls in with a 7mm nut driver against my workbench.

Yip, my new one is already giving me an issue.

Thanks a lot for this video, what’s the best servo saver you recommend?

Thank you for the hallow ball removal tip. Worked perfectly!!

Thank you for the clear and helpful information.

Thanks for the help my servo just went out today

Do you recall the size screw they sent with as far as thickness? Asking because the stock one I got is to small for my servo. Thanks

I cannot see how that works with the elongated hole at the end of the boot in the cup. I can see stuff getting in that unless you seal that as well. If the boot was longer so it covered that exposed hole, that would work. You need to do a follow up video on how that worked out.

I need to know the parts number for the shims? Outcast 8s

Hello! What gearing you have??

How you going to fit a 4s battery in each side of this erevo 2.0 not many batteries fit in these things please let me know because i really want to upgrade mine to

What fluid I should use from and rear ??

That is 1Mk??

What fluid I should use in the from diff?

And which fluid I should use in the from diff?

Bro what fluid I should use in the rear diff?

Hey man do you know if the xmax motor would also fit?

can you use 8s battery for it since the esc is upgraded? or you have to change the gearing too?

So a 2oz oil bottle would fill two shocks?

DONT LOSE SHIM OR BEND. I REPLACED IT WITH CUSTOM WASHER

Did the bellcrank rub the center driveshaft once you had it assembled?

How'd it work out, i need that servo for the Kraton, and the Outcast!!!

What about temperature does it heat up with them on?

what size ia the allen key on the fron tire ?

With these on traxxas arms?

Yes my pins fell out 3 times in 1 run and more often after the first time

NICE VIDEO

I might have told you already but this is the best differential walk through on here good job keep the maintenance content on kraton or outcast 8s

They need the shim

Hallo one question please? Differential oil for the infront 100.000 Center 1M and rear 100.000 it is OK? Or if you can, you can suggest me something better? Thanks

How are you going to fit two 4s batteries in the battery compartments? That’s the biggest hurdle I’ve ran into

You need to thread lock it

Thank you Bro, i'll be following your example, OUTSTANDING!!!

howd you make the 4s lipos fit?

I ben looking all over the place for a video or some info i could not get the stock servo to center out with the stock servo saver in looking like all the hot racing servo savers are all sold out

How did you fix this

T Maxx has 8 shocks

Red Loctite on wheel nuts? Better you than me!

Definitely helped! Going to transfer mine on over as well!

👍🏾👍🏾👍🏾

What batteries do you use?

So will two 5000 3s traxxas batteries make it run faster with just 8s esc?

Hi did that Chassis come on your erevo or is it after market mine is the stock grey, was wondering if the sold black ones

Will these pin work for the inside also

Does he run fans?

What battery are you using?

Haha, you've even dyed the chassis, that is sick!

Good Job !

great job friend👍👍

Hey bro great video. im actually using the stock servo for my outcast 8s exb its ok. the servo horn is weird kinda hard for the tires to stay straight. Just subscribed